News Releases from kurtz ersa Corporation
Read kurtz ersa Corporation company news
- SMTnet
- »
- News
- »
- News Contributors
- »
- News Releases from kurtz ersa Corporation
310 news releases added by kurtz ersa Corporation
Company Information:
Kurtz Ersa Inc. Hires New District Sales Manager in the Midwest
Sep 04, 2018 | Kurtz Ersa is pleased to announce the appointment of Jon Golm to Junior District Sales Manager for the Midwest. As part of the company’s national sales team, Golm will help drive the sales revenues for the Midwestern United States.
Kurtz Ersa Inc. supports transition to IPC-HERMES-9852
Sep 03, 2018 | Kurtz Ersa is pleased to announce that IPC-HERMES-9852 replaces the obsolete SMEMA standard for the transfer of board-related information. IPC-HERMES-9852 was developed and introduced to the market by The Hermes Standard Initiative, an independent and open group of leading vendors of SMT assembly equipment. Kurtz Ersa was one of the original companies to work toward this initiative.
Kurtz Ersa Inc. and Comtree to Participate in the EPTECH Winnipeg Show
Aug 26, 2018 | Kurtz Ersa Inc., a leading supplier of electronics production equipment, today announced that Comtree will represent the company at the EPTECH Winnipeg, scheduled to take place Sept. 18, 2018 at the Victoria Inn and Convention Centre in Winnipeg, MB.
Kurtz Ersa Inc.’s Joseph Clure Presents “Eliminating Failures with Innovative Technologies”
Aug 01, 2018 | Kurtz Ersa is pleased to announce that Applications Engineer, Joseph Clure recently presented on behalf of the company at the InnovationsFORUM – Mexico in Guadalajara.
Kurtz Ersa Inc. to discuss its reflow, selective solder and rework equipment at the CTEA Expo
Jul 22, 2018 | Kurtz Ersa today announced plans to exhibit at the CTEA (Austin) Expo & Tech Forum, scheduled to take place Tuesday, August 14, 2018 at the Norris Conference Center in Austin, TX. The Ersa team will discuss its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.
Kurtz Ersa opens central warehouse On-schedule completion, official opening and Open Day
Jul 19, 2018 | After a building phase of just twelve months, the new central warehouse of Kurtz Ersa went into operation at the beginning of July. An occasion that was fittingly celebrated: with an official opening and an Open Day. In a festive setting on 2 July, Kurtz Ersa CEO Rainer Kurtz und Kurtz Ersa Logistics Director Matthias Hofmann officially opened the new central facility – with the symbolic warehousing of the first container.
Kurtz Ersa Inc. Expands Its North American High-Tech Demo Center
Jul 11, 2018 | Kurtz Ersa is pleased to announce that it has invested in its facility in Plymouth to expand the demo room to 3,000 ft2. Additionally, the company added on offices and an extra training conference room.
Kurtz Ersa Mexico to Participate in SMTA Queretaro Expo
Jun 17, 2018 | Kurtz Ersa Inc. today announced plans to exhibit at the SMTA Queretaro Table Top Exhibition & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Hotel Mision Juriquilla in Mexico.
KIC Introduces Auto Profiling and Intelligent Network Software Ecosystem RPI i4.0
Jun 17, 2018 | KIC is pleased to announce a new automatic profiling system with network software for real-time dashboard, data sharing and traceability storage. The new RPI i4.0 automatically acquires profile data from each product soldered in the reflow oven, in real-time.
Guided Hybrid Rework for Professionals from Kurtz Ersa Inc.
Jun 11, 2018 | Kurtz Ersa today announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will highlight the award-winning HR 550 Ersa Hybrid Rework System.
Stencil Printer with Fully Integrated 3D SPI from Kurtz Ersa Inc. – Learn More at the SMTA Upper Midwest Expo
Jun 05, 2018 | Kurtz Ersa today announced that plans to exhibit at the Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, June 14, 2018 at the DoubleTree by Hilton Minneapolis - Park Place in Minneapolis, MN. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.
Kurtz Ersa Inc. and Comtree to Participate in the EPTECH Vancouver & Calgary Shows
Jun 03, 2018 | Kurtz Ersa Inc., a leading supplier of electronics production equipment, today announced that Comtree will represent the company at the EPTECH Vancouver and Calgary Shows. The Vancouver show is scheduled to take place Tuesday, June 5, 2018 at the Hard Rock Casino Vancouver, and the Calgary show is scheduled to take place Thursday, June 7, 2018 at the Glenmore Inn & Convention Centre.
Ersa Holds National Sales Meeting with Hands on Training
May 21, 2018 | Kurtz Ersa today announced that it held a successful sales meeting with hands on training for its North American sales representatives. The training was held May 16-17, 2018 at the company’s Plymouth facility and kicked off with a welcome speech from Albrecht Beck, President and CFO of Kurtz Ersa Inc.
Ersa’s VERSAPRINT 2 Ultra Offers Fully Integrated 100 Percent 3D SPI – Learn More at the SMTA Wisconsin Expo
Apr 27, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Wisconsin Expo & Tech Forum on Tuesday, May 8, 2018 at the Milwaukee Airport Crowne Plaza in WI. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.
Don’t Miss Ersa at the SMTA Empire Expo!
Apr 22, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Empire Expo & Tech Forum, scheduled to take place Tuesday, April 24, 2018 at the Holiday Inn Syracuse/Liverpool in Liverpool, NY. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.
Ersa Announces Versaflow 3 Application Training Course in April
Mar 16, 2018 | Kurtz Ersa North America today announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Application Training Course from Wednesday, April 18, 2018 at 1 p.m. to Friday, April 20, 2018 at 12 p.m. at its Plymouth office. The course will provide the knowledge and hands-on experience required for process application and programming on the Versaflow 3 selective soldering machine.
Ersa to Offer Versaflow 3 Maintenance Training Course in April
Mar 13, 2018 | Kurtz Ersa North America today announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, April 16, 2018 at 1 p.m. to Wednesday, April 18, 2018 at 12 p.m. at its Plymouth office. The two-day class will provide the knowledge and hands-on experience required to maintain and troubleshoot issues on the Versaflow 3 machines.
Learn More About Ersa’s Reflow, Selective Solder & Rework Systems at the SMTA Dallas & Houston Expos
Mar 05, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The SMTA Dallas Expo is scheduled to take place Tuesday, April 10, 2018 at the Plano Centre in Plano, TX. The Houston Expo & Tech Forum will be held Thursday, April 12, 2018 at the Bayou City Event Center in Houston, TX. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.
Award-Winning Reflow, Selective Solder & Rework from Ersa at SMTA Intermountain Expo
Feb 19, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Intermountain (Boise) Expo & Tech Forum, scheduled to take place Tuesday, March 20, 2018 at Boise State University in Boise, ID. The Ersa team will highlight its advanced reflow, selective solder and rework equipment.
Altek Electronics, Inc. Purchases Ersa’s Smartflow Selective Soldering System
Feb 15, 2018 | Kurtz Ersa North America has purchased and successfully installed the Smartflow 2020 selective soldering system. A veteran-owned small business privately held by three family members (Stephen, David and Sabrina), Altek manufactures printed circuit board assemblies and box builds for many industries including the medical, military, industrial and telecommunications industries.
Ersa Pushes for Smarter Systems – One Step Closer to Artificial Intelligence
Feb 12, 2018 | Kurtz Ersa North America is pleased to announce that it has developed several new features for its selective solder equipment, including VERSASCAN, VERSAEYE and Ersa CAD Assistant 4. The VERSASCAN module can look at boards being presented to the machine and confirm if all of the components are on the board and if the polarity is correct before they enter the machine. This can be paired with another feature called VERSAEYE that looks for any defects on the board. Finally, Ersa CAD Assistant 4 offers intuitive and automated offline programming with a graphical user interface and template library.
Ersa Partners with WEST TECH Automation in Rocky Mountain Region
Feb 01, 2018 | Kurtz Ersa North America announces the appointment of WEST TECH Automation as its manufacturers’ representative in
UT, CO, ID, WY and MT. WEST TECH will be responsible for the sales of Ersa’s products.
Advanced Reflow, Selective Solder and Rework Systems from Ersa at APEX
Jan 24, 2018 | Kurtz Ersa North America today announced plans to exhibit in Booth #1337 at the 2018 IPC APEX EXPO, scheduled to take place Feb. 27 - March 1, 2018 at the San Diego Convention Center in Ca. The Ersa team will highlight a lineup of advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, VERSAFLEX-Ultra selective solder module and IR/PL 650 XL rework system.
Ersa Continues to Grow Support in Mexico with New Field Service Engineer
Jan 11, 2018 | Kurtz Ersa North America is pleased to announce the newest member of its Kurtz Ersa Mexico service team. Gerardo Mejia is the company’s new field service engineer on the machine side and will be based at the KMX office in Guadalajara supporting all of Mexico.
SANTEC Marketing to Represent Kurtz Ersa North America
Jan 09, 2018 | Kurtz Ersa North America,announces the appointment of SANTEC Marketing as its manufacturers’ representative in AZ, New Mexico and Sonora. SANTEC will be responsible for the sales of Ersa’s entire range of products.
Ersa Appoints TRC as Its Representative in Florida
Jan 08, 2018 | Kurtz Ersa North America announces that it has appointed Technical Resources Corporation (TRC) as its manufacturers’ representative in Florida. TRC will represent and sell Ersa’s complete line of equipment.
Advanced Reflow, Selective Solder and Rework from Ersa
Jan 04, 2018 | Kurtz Ersa North America will exhibit at the SMTA Rocky Mountain Expo & Tech Forum on Monday, Jan. 25, 2018 at the West Club at Mile High Stadium in Denver, CO. The Ersa team will highlight its advanced reflow, selective solder and rework equipment.
Ersa Appoints TRC as its Representative in Florida
Jan 04, 2018 | Kurtz Ersa North America announces that it has appointed Technical Resources Corporation (TRC) as its manufacturers’ representative in Florida. TRC will represent and sell Ersa’s complete line of equipment.
Ersa Welcomes GMG Industrial to Representative Network
Jan 02, 2018 | Kurtz Ersa North America has appointed GMG Industrial Inc. as its manufacturers’ representative in TX, LA, AR and OK. GMG is a manufacturers’ representative for electronic assembly, inspection and consumables, and will represent Ersa’s complete line of equipment.
Versaflow 3 Application Training Course at Kurtz Ersa Guadalajara Facility
Dec 18, 2017 | Kurtz Ersa North America today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Application Training Course from Wednesday, January 17, 2018 at 1 p.m. through Friday, January 19, 2018 at 12 p.m. at the Kurtz Ersa Mexico office in Guadalajara. Students that attend this training class will gain the knowledge and hands-on experience for process application and programming on the Versaflow 3 selective soldering machine.
Ersa to Hold Versaflow 3 Maintenance Training Course in Mexico
Dec 14, 2017 | Kurtz Ersa North America today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, January 15, 2018 at 1 p.m. to Wednesday, January 17, 2018 at 12 p.m. at the Kurtz Ersa Mexico office in Guadalajara. This course will provide the knowledge and hands-on experience required to maintain and troubleshoot issues on the Versaflow 3 machines.
Ersa Congratulates IPC Hand Soldering Competition Champions
Dec 04, 2017 | Kurtz Ersa North America congratulates the 16 competitors that participated in the Hand Soldering Competition Championship on November 17 during the recently held productronica exhibition in Munich.
Ersa Strengthens Service Team with Addition of Quin Van Den Berg
Nov 30, 2017 | Kurtz Ersa North America is pleased to announce that it hired Quin Van Den Berg as the newest member of its service team. Van Den Berg will report to Chad Suckow and will be responsible for helping the Tools, Rework and Inspection team support the growing service need on that side of the business.
Ersa Receives a Global Technology Award for Its New Full Tunnel Nitrogen Wave Soldering System
Nov 15, 2017 | Kurtz Ersa North America is pleased to announce that it was awarded a 2017 Global Technology Award in the category of Wave Soldering for its Powerflow s. The award was presented to the company during a Tuesday, Nov. 14, 2017 ceremony that took place during productronica in Munich, Germany.
Discover Ersa’s Advanced Reflow, Selective Solder and Rework Systems at the SMTA New England Expo
Nov 09, 2017 | Kurtz Ersa North America will exhibit at the SMTA New England Expo & Tech Forum, scheduled to take place Thursday, Nov. 16, 2017 at the DCU Center in Worcester, Ma. The Ersa team will highlight its advanced reflow, selective solder and rework equipment.
Ersa Announces One-Day Technology Seminar in San Jose, CA
Nov 02, 2017 | Kurtz Ersa North America is pleased to announce plans to hold a one-day technology seminar on Wednesday, December 6 or Thursday, December 7, 2017 in San Jose, CA. Ersa and the INTERFLUX® Electronics team will present revolutionary developments in a low melting point solder alloy that improves quality, lowers costs and maximizes equipment efficiency.
Ersa Goes to SMTA LA/Orange County Expo This Week
Oct 30, 2017 | Kurtz Ersa North America is pleased to announce that it will exhibit at the SMTA LA/Orange County Expo & Tech Forum on Thursday, Nov. 2, 2017 in Long Beach, CA. The Ersa team will highlight the ‘little big one’ – the Smartflow 2020 selective solder system, and the HR 550 hybrid rework system.
Ersa and Northtouch Canada Inc. to Exhibit at EPTECH Ottawa
Oct 30, 2017 | Kurtz Ersa North America is pleased to announce that it will exhibit with Northtouch Canada Inc. at EPTECH Ottawa, scheduled to take place Tuesday, Oct. 31, 2017 at the Brookstreet Hotel in Ottawa, ON. EPTECH Ottawa is one of several regional professional electronics shows produced in major high-technology centers across Canada. It is the only series of coast-to-coast national electronics shows in Canada.
Meet Ersa at the SMTA Austin Expo & Tech Forum
Oct 05, 2017 | Kurtz Ersa North America, a leading supplier of electronics production equipment, plans to exhibit at the SMTA Austin (CTEA) Expo & Tech Forum, scheduled to take place Tuesday, Oct. 10, 2017 at the Norris Conference Center in TX. The Ersa team will highlight the ‘little big one’ – the Smartflow 2020 selective solder system, and the HR 550 hybrid rework system.
INTERFLUX® Electronics Completes Testing on New Alloy at Ersa Demo Room
Sep 24, 2017 | Kurtz Ersa North America is pleased to announce that it recently completed tests with INTERFLUX® Electronics on a new solder alloy. The tests were run on INTERFLUX’s LMPA™-Q alloy on the VERSAFLOW selective solder machine. The company offers a full range of tests at its demo room in Plymouth.
Rework and Professional Soldering from Ersa SMTA Guadalajara Expo
Sep 18, 2017 | Kurtz Ersa North America is pleased to announce plans to exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place Oct. 18-19, 2017 at Hotel Riu Guadalajara. Ersa’s representatives will show the HR600/2 rework system, IR/PL 550 rework system, i-CON VARIO 4 and i-CON 1 soldering stations.
Visit Kurtz Ersa in Booth #335 at SMTA International
Aug 14, 2017 | Kurtz Ersa North America announces plans to exhibit in Booth #335 at SMTA International, scheduled to take place Sept. 19-20, 2017 at the Donald Stephens Convention Center in Rosemont, IL. Ersa’s team will demonstrate the HR 550 Rework system, Ersa Mobile Scope and i-CON VARIO 4.
Electronic Systems, Inc. Invests in Ersa’s VERSAFLOW 3/45 Selective Solder System to Meet Diverse Customer Needs
Aug 10, 2017 | Kurtz Ersa North America is pleased to announce that Electronic Systems, Inc. (www.electronicsi.com) purchased and installed a VERSAFLOW 3/45 selective soldering system. Electronic Systems is headquartered in Sioux Falls, SD, and operates three facilities there.
Ernie Grice Celebrates 15 Years as VP of Sales – North America at Kurtz Ersa
Aug 01, 2017 | Kurtz Ersa North America today announced that Vice President of Sales – North America, Ernie Grice celebrated his 15-year milestone with the company in June. Grice has 28 years of experience working with electronics manufacturing companies, and is responsible for global key accounts at Ersa.
Ersa Versaflow Level II Application Training Course
Jun 28, 2017 | Kurtz Ersa North America today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Application Training Course from Wednesday, July 12, 2017 at 1 p.m. through Friday, July 14, 2017 at 12 p.m. at its Plymouth location. This course will provide the knowledge and hands-on experience required for process application and programming on the Versaflow 3 selective soldering machine.
Ersa to Hold Versaflow 3 Level II Maintenance Training Course
Jun 26, 2017 | Kurtz Ersa North America today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, July 10, 2017 at 1 p.m. to Wednesday, July 12, 2017 at 12 p.m. at its Plymouth facility. This course will provide the knowledge and hands-on experience required to maintain and troubleshoot issues on the Versaflow 3 machines.
Ersa Brings the ‘Little Big One’ to SMTA Ohio – Award-Winning Selective Solder
Jun 25, 2017 | Kurtz Ersa North America announces plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 13, 2017 at the Embassy Suites Cleveland Rockside in Independence (Cleveland), OH. The Ersa team will highlight the ‘little big one’ – the Smartflow 2020 selective solder system – and the 2017 HR 550 hybrid rework system.
Compact selective soldering without compromises from Ersa at SMTA Upper Midwest
Jun 01, 2017 | Kurtz Ersa North America announces plans to exhibit at the SMTA Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, June 22, 2017 at the DoubleTree by Hilton Minneapolis – Park Place in Minneapolis, MN. The Ersa team will highlight the ‘little big one’ – the Smartflow 2020 selective solder system, and the 2017 HR 550 hybrid rework system.
VP Pence Introduced to Ersa’s Technologically Advanced Selective Soldering System during Recent Visit to Dynalab, Inc.
May 30, 2017 | Kurtz Ersa North America is pleased to announce that its long-time customer, Dynalab, Inc., recently hosted Vice President Mike Pence at its facilities in Columbus, OH. He participated in a roundtable discussion with Dynalab Founder and President Gary James, U.S. Senator Rob Portman, U.S. Representative Pat Tiberi, and other members of the Central Ohio business community. During the visit, VP Pence was introduced to the Ersa VERSAFLOW 345, Ersa’s most technically advanced selective soldering system.
Ersa Address All Users with the Highest Precision & Safety Rework Requirements at SMTA Empire Expo
May 25, 2017 | Kurtz Ersa North America is pleased to announce that it will exhibit at the SMTA Empire Expo & Tech Forum, Thursday, June 15, 2017 at the Holiday Inn Syracuse/Liverpool in Liverpool, NY. Ersa’s team will discuss the award-winning HR 550 hybrid rework system and Smartflow 2020 selective solder system.
- SMTnet
- »
- SMT, PCB Electronics Industry News
- »
- kurtz ersa Corporation
- »
- kurtz ersa Corporation News
