News Releases from ITW EAE
Read ITW EAE company news
- SMTnet
- »
- News
- »
- News Contributors
- »
- News Releases from ITW EAE
22 news releases added by ITW EAE
Company Information:
ITW EAE Introduces Auto Exit Wing Feature for Electrovert® Wave Soldering Machines
Nov 21, 2022 | ITW EAE is releasing a new feature for the Electrovert Wave Soldering machines that provides automatic adjustment of the laminar wave flow to match the board velocity. To fully optimize the flow dynamics of the laminar wave, the velocity of the PCB needs to equal the flow of the solder over the weir of the exit wing. When the wave flow is fully optimized, the PCB 'peels' away from the solder which minimizes the opportunity for bridging defects to occur.
ITW EAE Wins Vision Awards for MPM Paste Management System and Electrovert Adjustable Wave
Aug 28, 2020 | ITW EAE is proud to announce that it has earned two Vision Awards for innovative MPM and Electrovert technology developments. MPM received a Vision Award for a new paste monitoring system featuring temperature monitoring as well as upper and lower limit roll-height monitoring. Electrovert received a Vision Award for the new DwellFlex 4.0 variable contact wave solder nozzle. The awards were presented at NEPCON Asia.
Vitronics Soltec Introduces 3D-Printed Twin-Nozzle for ZEVA Point-to-Point Selective Soldering
Apr 14, 2020 | ITW EAE is introducing an innovative new twin-nozzle developed by the Vitronics Soltec team for the ZEVA Selective Soldering System. The 3D-Twin-Nozzle™ has two nozzle diameters combined in one nozzle.
MPM Announces New EdgeLoc Board Clamping and Board Staging Options for Edison Printers
Apr 14, 2020 | ITW EAE is announcing new features for the MPM® Edison™ Printer. Board staging, designed to meet the demands from Automotive manufacturers for reduced cycle time, will now be a feature on the Edison. And the new EdgeLoc™ II is a robust addition to the side-clamming capability on the Edison.
MPM Completes Next Generation Momentum II Printer Line with Introduction of BTB and 100 Models
Apr 14, 2020 | ITW EAE introduced the next-generation MPM® Momentum® II Printer with the release of the HiE and Elite models in November of 2019. Now the company is releasing the Momentum II BTB and Momentum II 100. The Momentum II BTB is a Back-to -Back configurable stencil printer that allows dual-lane processing for higher throughput without increasing either line length or capital investment.
Electrovert 'DwellFlex 4.0' Wave Solder Nozzle Wins New Product Innovation Award at IPC APEX 2020
Apr 14, 2020 | EAE, the Electronic Assembly Equipment division of ITW is the proud recipient of an IPC APEX 2020 New Product Innovation (NPI) Award. The award recognizes the Electrovert DwellFlex 4.0 wave solder nozzle.
Camalot Announces PCB Temperature Monitoring on Prodigy Dispenser to Ensure Underfill Process Stability
Apr 14, 2020 | ITW EAE is introducing a patent pending option for the Camalot Prodigy dispenser that was developed to ensure process stability and increase yields for underfill applications. In applications where board heat is required, a constant product temperature through the dispense process is critical to ensure process stability and repeatability. Underfill materials vary in viscosity and filler types, therefore the heat requirement for the board also varies.
ITW EAE Receives Patent No. 10,434,537 for Camalot® Prodigy's™ Dynamic Dual Head™ Dispensing Technology
Apr 14, 2020 | The U.S. Patent and Trademark Office has issued Patent No. 10,434,537 protecting Dynamic Dual Head™ (DDH) dispensing technology for the Camalot® Prodigy™ Dispenser. The Prodigy Dispenser employs breakthrough technology that delivers high-speed, extremely accurate materials dispensing for electronics assembly and packaging with tighter tolerances, and higher yields.
ITW EAE Wins Global Technology Award for the Camalot Prodigy's Dynamic Dual Head Dispensing Technology
Apr 14, 2020 | ITW EAE has earned a coveted Global Technology Award for the Patented Dynamic Dual Head (DDH) dispensing technology for the Camalot Prodigy Dispenser. The Award was presented to Camalot Prodigy Business Manager, Hugh Reed and Engineering Manager Scott Reid during a ceremony at Productronica in Munich Germany.
MPM Introduces Next Generation Momentum II Printer
Nov 05, 2019 | ITW EAE is introducing the MPM® Momentum II™ Printer as the next generation of the highly successful Momentum printer line. The Momentum II features a new set of enhanced technologies that bring further advancement in quality, yield, productivity, ease of use and flexibility.
MPM to Present Technical Paper on Stencil Printing 0201 metric Apertures at Productronica
Oct 15, 2019 | A new technical paper that focuses on the application requirements of printing small apertures and the results of a design of experiment testing will be presented at the upcoming Productronica trade fair in Germany. The paper will be presented by Edward Nauss, MPM Applications Engineer at ITW EAE.
ITW EAE Wins VA Excellence Award for the Camalot Prodigy’s Dynamic Dual Head Dispensing Technology
May 01, 2019 | ITW EAE is proud to announce that it has earned a coveted VA Excellence Award for the Patented Dynamic Dual Head (DDH) dispensing technology for the Camalot Prodigy Dispenser. The Award was presented during the 13th Vision Awards program at Nepcon China.
Electrovert® introduces new DwellFlex™ 4.0 Variable Contact Wave Solder Nozzle
Dec 18, 2018 | As PCB manufacturers continue to implement automation into high-mix environments, ensuring the wave soldering process has maximum performance flexibility is critical. To meet that challenge, Electrovert is introducing the DwellFlex 4.0 variable contact wave solder nozzle.
Electrovert and Zestron to host a Joint Inline Cleaning Workshop in Ingolstadt
Sep 05, 2018 | ITW EAE will be demonstrating its Electrovert Inline cleaning equipment at a joint workshop hosted by Electrovert and Zestron. The workshop will take place October 11-12 at Zestron’s Technical Center in Ingolstadt, Germany. Participants will have a unique opportunity to learn first-hand from cleaning technology experts and observe the entire cleaning process and cleanliness evaluation. The event will offer an exchange of knowledge and networking with others who have similar cleaning challenges.
ITW EAE to Demonstrate Electrovert® Inline Cleaning Solution at IMTS Show in Chicago
Aug 14, 2018 | The International Manufacturing Technology Show (IMTS) will be held September 10 – 15 at McCormick Place in Chicago. ITW EAE, a division of Illinois Tool Works, will be exhibiting for the first time in Hall E, Level 2, booth 12183. On display will be the Electrovert Aquastorm 100 in-line cleaning system. Visitors will be treated to live demonstrations of the innovative technology that makes the Aquastorm the industry’s best performing industrial cleaner.
ITW EAE Partner, ProSMT installs first MPM Printer in Turkey
Jun 06, 2018 | ITW EAE partner ProSMT has just installed their first MPM printer in Turkey. This is a major market for electronics manufacturing equipment and this is the first step toward further sales growth in the area. ProSMT represents world-class products from ITW EAE including MPM printers, Camelot dispensers, Vitronics Soltec wave, reflow and selective equipment, plus Electrovert soldering solutions and cleaners.
ITW EAE Signs Distribution Agreement with ProSMT in Turkey
Feb 07, 2018 | ITW EAE announces a new partnership agreement with ProSMT Istanbul Turkey to represent and distribute ITW EAE equipment throughout Turkey. The agreement became effective in February 2018.
ITW EAE Announces New Representation Agreements for MPM, Camalot and Electrovert Equipment
Feb 06, 2018 | ITW EAE, the Electronic Assembly Equipment division of Illinois Tool Works, is extending representation agreements for several of its existing Vitronics Soltec partners to include MPM, Camalot and Electrovert equipment. The new agreements, which will be effective February 12, 2018, will now include all ITW EAE’s electronic assembly equipment which includes MPM printers, Camalot dispensers, Electrovert soldering and cleaning equipment and Vitronics Soltec soldering equipment.
Vitronics Soltec Soldering Equipment to be represented by Competitive Edge Solutions in New England
Dec 21, 2017 | ITW EAE announces a new partnership agreement with Competitive Edge Solutions LLC to represent and distribute Vitronics Soltec soldering equipment beginning January 1, 2018 for the territory of Maine, New Hampshire, Vermont, Massachusetts, Connecticut, and Rhode Island. This agreement is an expansion of Competitive Edge Solutions’ representation of ITW EAE’s product line which already included MPM printers, Camalot dispensers, and Electrovert soldering and cleaning equipment.
Vitronics Soltec Soldering Equipment to be represented by Murray Percival Company in MI, IN, OH and KY
Dec 18, 2017 | ITW EAE, the Electronic Assembly Equipment division of Illinois Tool Works, announces a new partnership agreement with Murray Percival Company to represent and distribute Vitronics Soltec soldering equipment beginning January 1, 2018 for the territory of Michigan, Indiana, Ohio and Kentucky. This agreement is an expansion of Murray Percival Company’s representation of ITW EAE’s product line which already included MPM printers, Camalot dispensers, and Electrovert soldering and cleaning equipment.
ITW EAE to Display Latest Advances in Electronics Assembly Equipment at Productronica Show
Oct 17, 2017 | ITW EAE, the Electronic Assembly Equipment division of ITW will be attending Productronica, November 14-17, 2017 in Munich, Germany. The ITW EAE booth (Hall A4, Booth 554) will be displaying and demonstrating the latest advances in the MPM, Camalot, Electrovert, Vitronics Soltec and Despatch product lines.
ITW EAE Camdenton Missouri Manufacturing Site Receives ISO 9001-2015 Certification
Mar 30, 2017 | ITW EAE has achieved International Organization for Standardization (ISO) 9001-2015 certification for its Camdenton, Missouri manufacturing site. ISO 9001 is the world’s most widely recognized Quality Management System and helps organizations to meet the expectations and needs of their customers.
- SMTnet
- »
- SMT, PCB Electronics Industry News
- »
- ITW EAE
- »
- ITW EAE News
