SMT, PCB Electronics Industry News

IPC Releases PCB Industryh Results For September 2011

Oct 28, 2011

Trends in the Book-to-Bill Ratio for Rigid PCBs

Trends in the Book-to-Bill Ratio for Rigid PCBs

Trends in the Book-to-Bill Ratio for Flexible Circuits

Trends in the Book-to-Bill Ratio for Flexible Circuits

Trends in the Book-to-Bill Ratio for Rigid PCBs and Flexible Circuits Combined

Trends in the Book-to-Bill Ratio for Rigid PCBs and Flexible Circuits Combined

Rigid and Flexible PCB Shipments Year-on-Year Growth Rates

Rigid and Flexible PCB Shipments Year-on-Year Growth Rates

IPC - Association Connecting Electronics Industries® announced the September findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced

Rigid PCB shipments were down 13.1 percent and bookings were down 19.9 percent in September 2011 from September 2010. Year to date, rigid PCB shipments decreased 0.4 percent and bookings declined 10.8 percent. Compared to the previous month, rigid PCB shipments increased 3.5 percent and rigid bookings decreased 8.9 percent. The book-to-bill ratio for the North American rigid PCB industry in September 2011 dipped just below parity at 0.99.

Flexible circuit shipments in September 2011 were down 0.7 percent and bookings declined 1.8 percent compared to September 2010. Year to date, flexible circuit shipments increased 1.6 percent and bookings increased 3.0 percent. Compared to the previous month, flexible circuit shipments increased 20.1 percent and flex bookings were up 9.9 percent. The North American flexible circuit book-to-bill ratio in September 2011 fell to 0.97.

For rigid PCBs and flexible circuits combined, industry shipments in September 2011 decreased 12.0 percent from September 2010, as orders booked decreased 18.4 percent from September 2010. Year to date, combined industry shipments were down 0.2 percent and bookings were down 9.6 percent. Compared to the previous month, combined industry shipments for September 2011 increased 4.9 percent and bookings decreased 7.3 percent. The combined (rigid and flex) industry book-to-bill ratio in September 2011 declined to 0.99.

Sales and orders were both under last year’s levels in September,” said IPC President & CEO Denny McGuirk. “Bookings have been especially sluggish and that has caused a drop in the book-to-bill ratio … although it is still very near parity, which suggests that flat sales is the likely near-term scenario.”

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 89 percent of the current PCB industry in North America, according to IPC’s World PCB Production Report.

The Role of Domestic Production

IPC’s monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In September 2011, 85 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 85 percent of rigid PCB and 83 percent of flexible circuit shipments in September by IPC’s survey participants. These numbers are significantly affected by the mix of companies in IPC’s survey sample, which change slightly in January, but are kept constant through the remainder of the year.

Bare Circuits versus Assembly

Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flexible circuits. In September, the flexible circuit manufacturers in IPC’s survey sample indicated that bare circuits accounted for about 53 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers’ businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data

Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC’s monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.


IPC (www.IPC.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3.000 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2.02 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.

Sep 23, 2024 -

North American EMS Industry Shipments Down 4.4 Percent in August

Sep 16, 2024 -

IPC White Paper Calls for Comprehensive Roadmap to Address Advanced Packaging to Board-Level Integration Challenges

Sep 09, 2024 -

Calling All California Employers: Harness State Funding for Workforce Training with IPC and ETP

Sep 09, 2024 -

WHMA/IPC Issues Call for Participation for Electrical Wire Processing Technology Expo 2025

Sep 02, 2024 -

IPC's Road to Reliability Webinar Series Covers New e-Mobility Technologies

Sep 02, 2024 -

North American PCB Industry Sales Down 21.2 Percent in July

Aug 26, 2024 -

North American EMS Industry Up 1.9 Percent in July

Aug 26, 2024 -

IPC Partners with Stephen F. Austin State University's CARRI and the IPC Education Foundation for Workforce Development in Electronics Manufacturing

Aug 19, 2024 -

Electronics Industry Sentiment Rebounds in August After Three-Month Decline

Aug 19, 2024 -

Latest Advancements in High-Reliability Electronics Focus of 2024 IPC High Reliability Forum

1513 more news from Association Connecting Electronics Industries (IPC) »

Sep 23, 2024 -

BENTLY NEVADA 330103-00-04-10-02-00

Sep 23, 2024 -

ABB DSSA165 48990001-LY

Sep 23, 2024 -

FOXBORO P0916DB

Sep 23, 2024 -

ABB DSQC325 3HAB2241-1 Control Circuit Board

Sep 23, 2024 -

ABB DSQC325 3HAB2241-1 Control Circuit Board

Sep 23, 2024 -

TRICONEX 4000098-510

Sep 23, 2024 -

HONEYWELL 8C-PAIH51 51454352-175

Sep 23, 2024 -

ABB AI930S 3KDE175511L9300

Sep 23, 2024 -

ERNI 9609 EM-DIO 02 EM-DIO-02 2445400132LS

Sep 23, 2024 -

ABB NIDS01 Digital Station Interface Module

See electronics manufacturing industry news »

IPC Releases PCB Industryh Results For September 2011 news release has been viewed 897 times

High Resolution Fast Speed Industrial Cameras.
High Precision Fluid Dispensers
Win Source Online Electronic parts

Fluid Dispensing Aerospace