SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • MIRTEC to Exhibit Complete Line of Technologically Advanced 3D AOI and SPI Inspection Systems at IPC APEX 20

MIRTEC to Exhibit Complete Line of Technologically Advanced 3D AOI and SPI Inspection Systems at IPC APEX 20

Jan 28, 2018

3D AOI and SPI Inspection Systems.

3D AOI and SPI Inspection Systems.

MIRTEC, “The Global Leader in Inspection Technology,” will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1327 at the 2018 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place February 27th- March 1st, 2018 at the San Diego Convention Center.

“We are very excited about the products that we will be presenting at APEX 2018,” stated Brian D’Amico, President of MIRTEC’s North American Sales and Service Division. “MIRTEC will feature a total of seven (7) 3D Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the Electronics Manufacturing Industry.”

The Award Winning MV-6 OMNI 3D AOI Machine is configured with MIRTEC’s exclusive OMNI-VISION® 3D Inspection Technology which combines our 15 Mega Pixel CoaXPress Camera Technology with MIRTEC’s revolutionary Digital Multi-Frequency Quad Moiré 3D system in a cost effective platform. MIRTEC’s 15 Mega Pixel CoaXPress Vision System is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of 3D inspection systems. MIRTEC’s Digital Multi-Frequency Quad Moiré Technology, provides true 3D inspection using a total of four (4) Programmable Digital Moiré Projectors to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow. Fully configured the MIRTEC MV-6 OMNI machines feature four (4) 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel Top-Down Camera. There is little doubt that this new technology has set the standard by which all other inspection equipment is measured. MIRTEC will have two (2) MV-6 OMNI’s on display one configured with a 10um lens for High-Performance applications and the other with a 15um lens for High-Speed applications.

NEW to APEX 2018, MIRTEC will display an MV-6 OMNI configured with a prototype of our OMNI-VISION 2.0® 3D Inspection Technology. This revolutionary 3D technology combines MIRTEC’s proprietary 15 Mega Pixel Top-Down CoaXPress Camera with a total of eight (8) Digital Multi-Frequency Moiré 3D Projectors. Each projector is capable of projecting (3) frequencies effectively “Leap-frogging” the competition with the ability to capture up to ninety-six (96) 3D images per inspection frame. Fully configured, the system features four (4) 18 Mega Pixel Side-View Cameras in addition to the 15 Mega-Pixel CoaXPress Top-Down Camera.

MIRTEC’s Award Winning MS-11e 3D SPI Machine is configured with an exclusive 15 Mega Pixel CoaXPress Camera System, providing enhanced image quality, superior accuracy and incredibly fast inspection rates.

The MS-11e uses Dual Projection Shadow Free Moiré Phase Shift Imaging Technology to inspect solder paste depositions on PCBs post screen print for insufficient solder, excessive solder, shape deformity, shift of deposition and bridging. The MS-11e uses the same robust platform as MIRTEC’s MV-6 OMNI Series.

MIRTEC will have two (2) MS-11e’s on display one configured with a 10um lens for High-Performance applications and the other with a 15um lens for High-Speed applications.

MIRTEC’s Award Winning MV-3 OMNI Desktop 3D AOI Machine is configured with the same hardware and software as MIRTEC’s in-line OMNI-VISION® 3D Inspection Systems providing 100% compatibility across MIRTEC’s entire 3D AOI product line. These systems feature MIRTEC’s exclusive OMNI-VISION® 3D Inspection Technology which combines our 15 Mega Pixel CoaXPress Camera Technology with MIRTEC’s revolutionary Digital Multi-Frequency Quad Moiré 3D system in a newly designed desktop platform. MIRTEC’s 15 Mega Pixel CoaXPress Vision System is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of 3D inspection systems. MIRTEC’s Digital Multi-Frequency Quad Moiré Technology, provides true 3D inspection using a total of four (4) Programmable Digital Moiré Projectors to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow. Fully configured the new MIRTEC MV-3 OMNI machine features four (4) 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel CoaXPress Top-Down Camera. Without question, the MV-3 OMNI is the most Technologically Advanced Desktop 3D AOI machine in the world! MIRTEC will have two (2) MV-3 OMNI’s on display one configured with a 10um lens for High-Performance applications and the other with a 15um lens for High-Speed applications.

MIRTEC’s total quality management system software, INTELLISYS® will also be on display at the IPC APEX EXPO. This software suite promotes continuous process improvement by allowing manufacturers to track and eliminate defects on inspected assemblies.

TECHNOLOGICALLY ADVANCED

MIRTEC continues to set new standards within the highly competitive Electronics Inspection Industry”, continued D’Amico. “These revolutionary products provide unprecedented 3D inspection performance and the industry’s lowest cost of ownership making them an ideal solution for electronics manufacturing companies of all sizes. We look forward to welcoming visitors to our booth #1327 during the three-day event.”

MIRTEC is a leading global supplier of automated inspection systems to the electronics manufacturing industry. For further information, please visit www.mirtec.com

Sep 17, 2018 -

MIRTEC Features Award-Winning 3D AOI and SPI Systems at SMTAI 2018

Aug 21, 2018 -

MIRTEC Announces Technical Collaboration Agreement with YXLON and The Comet Group

May 20, 2018 -

MIRTEC Europe to Exhibit at SMT/Hybrid/Packaging 2018

May 20, 2018 -

Electrica Ltd. Purchases Mirtec’s MV-3 OMNI to Further Improve Quality Standard

Mar 29, 2018 -

MIRTEC Announces Corporate Partnership Agreement with Vectralis Engineering and USM Reps

Feb 28, 2018 -

MIRTEC WINS SERVICE EXCELLENCE AWARD FOR TEST AND INSPECTION FOUR YEARS IN A ROW!

Feb 02, 2018 -

Distributor YouSMT Strengthens Mirtec’s Presence in Italy

Jan 29, 2018 -

Norcott Technologies Purchases Mirtec’s MV-3 OMNI to Strengthen Its Inspection Capability

Jan 18, 2018 -

MIRTEC Europe Celebrates 10 Years of Consistent Inspection Innovation

Jan 04, 2018 -

MIRTEC REPORTS RECORD SALES REVENUE FOR 2017

143 more news from MIRTEC Corporation »

Sep 19, 2018 -

VJ Electronix makes component counting more accurate – Visit us at SMTA International

Sep 19, 2018 -

Specialty Coating Systems Introduces New PrecisionCoat Automatic Quick Change at SMTAI

Sep 19, 2018 -

STI Sponsors SMTA International

Sep 19, 2018 -

Nordson Test & Inspection Announces AOI and X-ray Lineup for SMTAI

Sep 19, 2018 -

SMTA Welcomes New Board Members

Sep 19, 2018 -

Free Annual SMTA Women’s Leadership Program at SMTAI

Sep 19, 2018 -

CyberOptics to Present Technical Paper ‘Extending 3D MRS Technology to Address Challenging Measurement and Inspection Applications’

Sep 19, 2018 -

IPC Hand Soldering Competition Returns to What’s New in Electronics Live 2018

Sep 19, 2018 -

BTU to Demo New WINCON Oven Control System Release at SMTAI

Sep 18, 2018 -

Lower production costs with solder recovery from EVS – Learn more at SMTAI

See electronics manufacturing industry news »

MIRTEC to Exhibit Complete Line of Technologically Advanced 3D AOI and SPI Inspection Systems at IPC APEX 20 news release has been viewed 114 times

  • SMTnet
  • »
  • Industry News
  • »
  • MIRTEC to Exhibit Complete Line of Technologically Advanced 3D AOI and SPI Inspection Systems at IPC APEX 20
pcb components X-ray inspection

x-ray inspection system