SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Making Readable Silkscreen Layouts for your Printed Circuit Board (PCB) Design

Making Readable Silkscreen Layouts for your Printed Circuit Board (PCB) Design

Oct 18, 2018

What is a PCB design silkscreen and why include them in a design plan? What does your PCB need to be a good readable silkscreens? 

What are Silkscreens?
Generally a Printed Circuit Board (PCB) Design has many different layers and the silkscreen layer is one of these layers. Since the silkscreen must be printed on the PCB surface there are at most two silkscreen layers the top and bottom for each PCB. Silkscreens holds text information printed onto the board for humans to read and interpret. On the silkscreen of a PCB you may print all sorts of information like the component reference designators, company logos, manufacturer marks, warning symbols, part numbers, version numbers, date code, etc. However space on a PCB’s surface is limited so it is best to limit it to useful or important information. Thus the silkscreen layer usually only holds a component legend showing where the various components go on the board with company logos and board design number. 

Currently custom built digtal ink-jet printers specially for priting PCBs are most often used for printing silkscreens images onto PCB surfaces from board design data. Originally silkscreens were printed using the screen printing methods from which the name silkscreen is derived. This name is due to traditional screen printing technique being known for requiring a sheet of fine cloth like silk or polyester as a screen and a frame made of wood, aluminum, etc. Now as technology advanced many different simpler or faster methods for silkscreen printing were developed but the name remained the same. 

How to Design Silkscreens?
Notably editing the silkscreen layouts on a PCB design is a minor step in PCB Design since a silkscreen is not necessary for assembling a PCB. However while it is not absolutely necessary step it is still an important step that aids in the assembly of the circuit board by providing references during construction and troubleshooting. Various computer programs for PCB Design are available on the market for example the well known Mentorgraphic PADs Layout and Router. In the case of Mentorgraphic PADs when designing a PCB Layout when placing components on the layout in the design file a component reference designator code is automatically assigned to each component on the layout. 

When designing the PCB layout we move and rotate the component on the layout. Component reference designator codes move and rotate with them since they are attached to the components. Thus editing the silkscreen becomes necessary in this case. There are also programs where you design the silkscreen writing the component reference designator codes yourself to go with the corresponding component locations. In these programs you just need to be aware of the key points below while taking care to assign different reference code to each component. 

Orientation/Overlaps
Regardless of whether you are editing an automatically generated silkscreen or designing a silkscreen layer from scratch, there are key points that you should pay attention to if you want to design a good readable silkscreen layer design. In order to design a good silkscreen you need to:

Fig.1Fig.2Fig.3

  1. Edit the orientation of text for component reference designator, part type, etc so that all these have the same orientation, if possible setting up a top and bottom which means the silkscreen would be easier to read.
  2. Check for overlapping texts a common problem before rotating the text and adjusting the component reference designator marks. One example, is shown in Fig.1 below, the marks have different orientations and are overlapping. In the picture you can see how confusing and difficult the marks would be to use as references when assembling or troubleshooting if not corrected. As such you need to rotate and move component reference designator to the correct orientation and positions by the corresponding component.
  3. Take note that before constructing a circuit board, PCB manufacturers usually automatically trim the component reference designator marks that go over pads and vias to avoid them overlapping and possibly affecting the circuits thus:
  4. Check for component reference designator marks that were put over circuit pads overlapping with the pads like on the first component mark circled in Fig.2 . Since they are usually trimmed out and not printed and you need component reference marks as guides during PCB assembly and troubleshooting you need to move these marks to an open space with a position next to the corresponding component.
  5. Check for marks over via holes like the one shown beside the second component mark in Fig.2. Since untented via holes do not have a surface to be printed over, you cannot print on it but when you use a tented via where you cover the via hole with solder mask you cannot use it as a test point. Thus if there is space it is best to move it to a position next to the corresponding component.
  6. Check if there are any reference marks placed so that it would be under objects once the components are soldered on, like in Fig.3, if there are marks under the component, they need to be moved. Since reference marks need to be seen to be of use, when covered by components they are of limited use as references during troubleshooting and PCB assembly.



Additional Marks

Fig.4Fig.5Fig.6

  1. Adding extra marks may help show the orientation of components on the circuit board like in Fig.4. You may add marks with shapes like triangles, etc in addition to the original orientation signs on the component object marks to help showing the orientation of components with different I/Os that need it.
  2. Place polarity marks like the positive mark in Fig.5 outside of the component object marks. For components like large capacitor or other components with specific polarity it reduces the chances of component orientation mistakes during the board assembly which makes the process much smoother.
  3. Add measurement marks of the number of pins and lines on a microchips (ICs) on the silkscreen like in Fig.6.



Design Considerations
Other points you may wish to consider when designing a silkscreen is that if you:

  1. Restrict the silkscreen to only one side like the top may cut your printing cost in half since in that case you would only need to print one side not two.—Not true in Bittele’s case we don’t charge anything for single or double sided silkscreen.
  2. Mark using standard colours and larger shapes makes silkscreen cheaper and easier to read since you need special inks and standard colours are usually in stock thus cheaper than a colour that needs to be special ordered.
  3. Measure distances to allow a certain amount of tolerance for common printing errors in the board by a few mils difference. Can reduce the possibility of problems due to machine printing errors.

http://www.flason-smt.com/new/Making-Readable-Silkscreen-Layouts-for-your-Printed-Circuit-Board-PCB-Design.html

When SMT matter to your business, partner with Flason. Where innovation takes form.
reflow oven lead free reflow oven LED strip reflow oven dual rail reflow oven custom reflow oven China reflow ovenSMT Peripheral Equipment SMT reflow oven 
wave soldering machine pick and place machine lead free wave soldering machine custom wave soldering machinecustom pick and place machine SMT Assembly line
SMT Reflow Oven Manufacturer Wave Soldering Mahchine Manufacturer Pick and Place Machine Manufacturer Reflow Oven Manufacturer SMT Spare Parts LED Pick and Place Machine
Andrey: sales@flason-smt.com Wechat whatsapp:+86 13691605420

Keywords: Reflow Oven SMT Reflow Oven Wave Soldering Machine SMT Stencil Printer Pick and Place Machine SMT Inspection machine SMT Assembly Line SMT Peripheral Equipment SMT Spare Parts reflow oven lead free reflow oven LED strip reflow oven dual rail reflow oven Custom reflow oven China reflow oven SMT Peripheral Equipment SMT reflow oven wave soldering machine pick and place machine lead free wave soldering machine custom wave soldering machine custom pick and place machine SMT Assembly line SMT Reflow Oven Manufacturer Wave Soldering Mahchine Manufacturer Pick and Place Machine Manufacturer Reflow Oven Manufacturer SMT Spare Parts LED Pick and Place Machine

For More information,visit US: Reflow Oven Manufacturer or SMT Reflow Oven Wave Soldering Machine SMT Stencil Printer Pick and Place Machine SMT Inspection machine SMT Assembly Line SMT Peripheral Equipment SMT Spare Parts SMT Feeder SMT Nozzle Feeder storage cart USB Flash Drive Manufacturer wave soldering machine manufacturer Email us: sales@flason-smt.com

Dec 08, 2018 -

Lead-Free (Pb-Free) Solder and Composition

Dec 08, 2018 -

All about Semiconductor

Dec 08, 2018 -

Top 10 Consumer Electronics Companies in the World

Dec 08, 2018 -

How Electronic / Electrical Circuit Works

Dec 08, 2018 -

Ball Grid Array (BGA) Package

Dec 08, 2018 -

SMT Dictionary – Surface Mount Technology Acronym and Abbreviation

Dec 08, 2018 -

Printed Circuit Board (PCB) for Surface Mount Technology (SMT)

Dec 08, 2018 -

Basic Soldering Guide – How to Solder Electronic Components

Dec 08, 2018 -

RoHS Guide in Electronics: RoHS, WEEE and Lead-Free FAQ

Dec 08, 2018 -

Electronic Components, Parts and Their Function

133 more news from Flason Electronic Co.,limited »

Mar 19, 2024 -

Made in Japan: Solder Paste Jet Dispensing Machine

Mar 18, 2024 -

Kurtz Ersa Inc. Receives 2024 CIRCUITS ASSEMBLY NPI Award for the VERSAFLOW ONE X-Series

Mar 18, 2024 -

MicroCare, LLC Named a Best Place to Work in Connecticut for 2024

Mar 18, 2024 -

Solderstar to Showcase Advanced Solutions at EPP Innovations FORUM 2024

Mar 18, 2024 -

Solderstar to Showcase Advanced Solutions at EPP Innovations FORUM 2024

Mar 18, 2024 -

Solderstar to Showcase Advanced Solutions at EPP Innovations FORUM 2024

Mar 18, 2024 -

SHENMAO Low-Temperature Solder Paste PF735-PQ10-10 Is Designed for High-Speed Printing Processes

Mar 18, 2024 -

Ultrasonic Selective Fluxing System Excels in Efficiency

Mar 18, 2024 -

Silicon Mountain Accelerates Electronics Manufacturing with Universal Instruments Fuzion System Acquisition

Mar 18, 2024 -

BTU's Aurora Scores Another Award – 2024 NPI Award Recipient

See electronics manufacturing industry news »

  • SMTnet
  • »
  • Industry News
  • »
  • Making Readable Silkscreen Layouts for your Printed Circuit Board (PCB) Design
Fluid Dispensing Aerospace

SMT spare parts - Qinyi Electronics