SMT & PCB Assembly Equipment

KIC KIC X5 Thermal Profiler with SPC software and RF capability For Reflow

KIC KIC X5 Thermal Profiler with SPC software and RF capability For Reflow

KIC KIC X5 Thermal Profiler with SPC software and RF capability For Reflow

Model:

KIC KIC X5 Thermal Profiler with SPC software and RF capability For Reflow

Part Number:

X5

Category:

Assembly Accessories

Model Year:

2018

Condition:

new

Location:

China

Offered by:

KingFei SMT Tech

Detailed Product Description
Features: 7 Channel Brand: KIC
Part Name: X5 Reflow Profiler Model: X5
Condition: Original New Leadtime: 7days
KIC X5 Thermal Profiler with SPC software and RF capability For Reflow

Track More Data Points
With 7, 9, and 12-channel models, the X5 is able to acquire a lot of data, allowing you to precisely evaluate each thermal profile and process in your factory. Measure slope, peak temperature, time above liquidous, and more. Data is transferred to your computer via a USB cable or, for RF models, wirelessly through radio frequency transmitters—no cable connection required.

Data Made Useful
A lot of data means nothing without a way to parse it. The powerful SPC charting software that comes with the X5 helps improve production quality, productivity, and documentation over time by allowing operators to spot and correct process drift before it results in defects and yield issues. The collected data can also be analyzed with an eye toward overall process improvement.

Set Up Profiles in Seconds
In addition to helping to improve process in general, the X5 makes it easy to set up new profiles. Process improvement and optimization is automated with the X5, thanks to the included Navigator Power™ software. Navigator Power is able to identify the best oven setup in mere seconds, based on basic optimization criteria selected by the user. Users are quickly and intuitively guided through profiling, and a Process Window Index™ (PWI) lets operators know at a glance how “in spec” a given profile is—the lower the PWI number, the more centered the profile is within the process window. Finally, manual prediction capability allows users to instantly view expected results to changes in the profile.

KIC X5 Thermal Profiler with SPC software and RF capability For Reflow

Better Hardware, Longer Warranty
Featuring new improvements in hardware, the X5 thermal profiler from KIC is designed to withstand daily use in the toughest production environments, a claim that’s backed up by the profiler's two-year warranty. The new design also addresses the voltage spikes that can occur in some ovens and wave soldering machines with updated electronic circuitry that is more tolerant of these conditions.

Features
KIC 'X5' Key Features
Robust hardware backed by 2-year warranty
Wireless data transfer with RF-equipped models
SPC (statistical process control) software included for documentation and production optimization
Simplifies oven setup: KIC’s optimization software selects the best oven setup for each new product in seconds
User-selectable setup criteria
Reduces profiling to a single number: The PWI (process window index) makes it easy for operators, techs, and engineers to see at a glance how close the profile comes to spec.
Immediate profile analysis: Objective and personnel-independent profile analysis gives you information you can bank on
30-day money-back guarantee


Navigator Software
Automatically set up the best recipe for any product in any reflow oven
KIC navigator

The KIC Navigator software included with the X5 makes it possible to optimize oven setup even for strict process requirements, ensuring maximum product throughput, better equipment utilization and more efficient staff allocation.

Key Features
Finds the Best Possible Profile in Less Than 60 Seconds
Enable Deep-In-Spec Profile
Determines Single Best Oven Recipe for Every Product
Maximize Product Throughput
How It Works
KIC’s powerful Navigator™ software is a system that automatically determines the single best oven recipe for every product. Once the initial profile is run, the Navigator evaluates billions of combinations of conveyor speeds and setpoint temperatures in less than a minute, so operators no longer need to set search parameters.

You give the Navigator your profile specs, and the Navigator presents the process set up that will produce a profile centered in the process window, with the lowest Process Window Index™ (PWI). With the Navigator, an operator with limited process knowledge can find the optimal profile every time.

Whether it takes you two runs to set up a simple profile, or 5 runs for a difficult one, why spend the time? The Navigator finds the best possible profile in less than 60 seconds. This means more efficient use of the engineering resources, increased line uptime, and improved line uptime - which all mean an improved bottom line.

Without the power of the Navigator, solder reflow oven setpoint changes are typically made in 5°C increments. Research made possible by the Process Window Index shows that setting up the oven in smaller increments offers significantly improved process performance. Extensive testing revealed substantial benefits in setting up profiles in 1°C increments. Slight setpoint changes in the soak and reflow zones produced more robust profiles that reduced temperatures at hot spots on the board and provided more even heating across the assembly. Precision profiling also makes developing tight-spec lead-free profiles as quick and easy as any other profile with the Navigator.

Computer Requirements
Minimum System Requirements

Dual Core / 1 GHz Processor with 2 GB RAM
2 GB available storage
Video 1024 x 768 resolution / 16-bit
1 available USB port (for software key)
Microsoft® Windows® XP 32b SP3 and later
Specifications
KIC 'X5' - Specifications
Dimensions (L x W x H) 7-channel
206 x 60 x 17 mm (8.1" x 2.4" x 0.7")
With shield: 302 x 75 x 23 mm (11.9" x 3" x 0.9")
9-channel
206 x 75 x 17 mm (8.1" x 3" x 0.7")
With shield: 312 x 90 x 23 mm (12.3" x 3.5" x 0.9"
12-channel
206 x 98 x 17 mm (8.1" x 3.9" x 0.7")
With shield: 323 x 113 x 23 mm (12.7" x 4.4" x 0.9"
Accuracy ± 0.5˚C
Resolution 0.1˚C
Internal Operating Temp. 0˚C to 85˚C
Sample Rate 0.1 to 10 readings/sec
Data Points 224,640
Data Transfer Standard model
USB 2.0 (Std-A/Mini-B) after datalogging run
RF model
Wireless over RF (radio frequency 433.92 MHz), sent real-time during datalogging run, or via USB 2.0 (Std-A/Mini-B) after datalogging run
Power Requirements 3 AAA batteries, USB cable when connected to a computer
Thermocouple Capacity Type K, standard (7, 9, or 12, depending on model)
Thermocouple Temperature Range -150˚C to 1050˚C
Thermal Shield Cool Touch Stainless Steel 7 or 9 channel
Computer Configuration
Minimum System Requirements
Dual Core / 1 GHz processor PC w/2 GB RAM
2 GB available storage
Video 1024 x 768 resolution, 16-bit
1 available USB port for data download
1 available USB port for software key

Included
KIC 'X5' Kit Contents
Slim-design thermal profile
Thermal shield
Software CD with Navigator Power and SPC software
Software protection dongle
USB cable (A male/mini-B)
RF transmitter (on RF models)
AAA batteries (6)
Scissors
Carrying case
Thermocouples (number dependent on number of channels)
Electronic user manual
Electronic hardware guide
Gloves
Getting started guide
Calibration certificate

Company Information:

KingFei SMT Tech

Main Products: 1, Original new and Original Used SMT/AI Spare Parts. 2, SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3, Maintenace and Repair Service Pre-Sales Service Provide details ab

Shenzhen, China

Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative

  • Phone 0755-33578694

KingFei SMT Tech website

Company Postings:

(54) used SMT equipment marketplace items

(11250) SMT parts, accessories & PCB supplies items

(30) products in the catalog

SMT Equipment & PCB Assembly Machines RFQ

This KIC KIC X5 Thermal Profiler with SPC software and RF capability For Reflow has been added in 19, Jul 2022

This KIC KIC X5 Thermal Profiler with SPC software and RF capability For Reflow has been viewed 401 times.

IPC Certification Training Schedule

Jetting Pump for Integration