Rework & Repair Equipment
SMT, PCB Manufacturing products and services offered by SMTnet members.
- SMTnet
- »
- SMT Products Catalog
- »
- Rework & Repair Equipment
349 Rework & Repair Equipment Products
Standard Straight Flat Reamer/Straight Fork Tip (SH-20A) (8")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (8") Description: Straight Flat Reamer...
Stainless Steel Brush (3 1/2") SH-61
Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature sizes. Stainless Steel Brush (3 1/2&...
Stainless Steel Brush (2 5/16") SH-60
Stainless Steel Brush (SH-60) 2 5/16" Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from sold...
Miniature Angled Flat Reamer/Straight Fork Tip SH-20D (5 1/2")
Angled Flat Reamer Miniature (left) & Standard (right)...
Flat Shockproof Vulcan Spudger, (SH-80) Double Beveled and Conical Ends. (6" x 1/4")
Flat Shockproof Vulcan Spudger SH-80 Double Beveled and Conical Ends. (6" x 1/4") The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, ele...
Orange Sticks SH-83
Orange Sticks with double beveled ends, 7" x 5/32" (SH-83) The Beau Tech orange sticks are made of high quality non-resin wood which will not contaminate solder and component leads. Natural wood is among...
Probes
These Made in America, Beau Tech RocHard MilProbes are the only complete line of probes available to meet the full spectrum of circuit repair, rework, and assembly needs from Through Hole to 2 mil pitch Surface Mount....
ESD Safe Probes
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards....
Mirrors, Brushes, Spring Hooks, Lead Cleaners
The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budgetary requirement of modern manufacturing. E...
NASA Style Lead Cleaner SH-66 Lead Cleaner
Use this quality tool to remove oxides, scale, grease and dirt from leads. The tinned copper braided shielding, backed by a stainless steel spring, ensures a fast and easy job. The lead cleaner meets NASA specification NP-200-4 and ensures the best w...
Pull Version Spring Hook SH-152 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
Push Version Spring Hook SH-150 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
Inspection Mirror
Inspection Mirror (SH-133S) The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budg...
Round Vulcan Shockproof Spudger, (SH-81) Screwdriver and Conical Ends. (5 1/2" x 5/16")
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards. Beau Tech spudgers have many advantages compared with...
Miniature Straight Flat Reamer/Straight Fork Tip (SH-20C) (5 1/2")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (5 1/2") Description: Straight Flat Reamer...
Soldering Rework Tools
The tool ends are made of high quality Swedish Hardened Tool Steel, carefully heat treated and tempered to provide a tough, long lasting working edge that resists wear....
A US manufacturer of quality hand tools for those engaged in the repair, rework, R & D, testing, and assembly of electronic components and printed circuit boards from Through Hole to 2Mil Pitch Surface Mount.
Portland, Maine, USA
Automatic bga rework machine soldering desoldering station sv-560A bga rework station board repair
Automatic bga rework machine soldering desoldering station bga rework station board repair...
Laptop bga rework station bga repair machine ipad board repair iphone 6 motherboard reballing station auto welding machine
Laptop bga rework station bga repair machine ipad board repair...
Iphone 6 motherboard reballing station Semi automatic bga rework station machine to desolder and solder chip on mobile pcb
Semi automatic bga rework station machine to desolder and solder chip on mobile pcb...
Shultte Star SV-560A Automatic bga rework machine soldering desoldering station bga rework station printed circuit board repair
Shutte Star SV-560A Automatic bga rework machine soldering desoldering station bga rework station printed circuit board repair...
Hot selling optical motherboard BGA chip rework station for laptop/mobile PCBA chip soldering and desoldering
Hot selling optical motherboard BGA chip rework station for laptop/mobile PCBA chip soldering and desoldering...
Shenzhen Honreal Technology Co.,Ltd
Shenzhen Honreal Technology Co., focus on global Surface Mount electronic assembly field for 15 years. Specializing in providing various brands of SMT pick and place machines and spare parts. Fuji, Panasonic, Juki, Hitachi, Yahama
Shenzhen, Guangdong, China
Rework Stations
Rework Stations - Air Vac, SRT, Pace, Metcal, Conceptronic Rework Stations for sale at JMW Enterprises....
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Rushford, Minnesota, USA
ZM-R7830A BGA Rework Station
The Zhuomao ZM-R7830A BGA Rework Station is a high end Nitrogen Capable Rework System. Great to help increase yield with Lead Free Solders and a no clean process. Place SMD components as large as 80mm with the h...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 23 X 23mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 23mm x 23mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
ZM-R5860 BGA Rework Station
The Zhuomao ZM-R5860 BGA Rework Station is an entry level BGA Rework Station without Vision Assist. Has upper and lower spot heaters and a 2700 Watt area heater. Easily program profiles up to 8 zones....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 21mm x 21mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 21mm x 21mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 17 X 17mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 17mm x 17mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
BGA Rework Station, Nitrogen Capable, Model E6250U
NEW! Nitrogen Capable for High Yield Lead Free BGA Rework. NEW! Movable top and bottom gas heaters allows for easy rework near the edge and hard to ger area's of large PCB's. For high volume BGA Rew...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 23mm x 23mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 23mm x 23mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
ZM-R720A BGA Rework Station
The Zhuomao ZM-R720A BGA Rework Station. Place SMD components as small as 0.5mm with this high resolution Hot Air Rework System. One of the most precise machines on the market at this affordable price....
BGA Nozzles for the SRT, Shuttle Star, and Zhuomao Rework Machines
We carry a large selection of BGA Nozzles for the SRT, Shuttle Star, and Air Vac BGA Rework Machines. We also provide custom designed nozzles for your specific requirements. Prices Range from $100.00 to $450.00 each....
Nitrogen Capable SMD & BGA Rework Station Model E6250U with Cabinet
NEW! Nitrogen Capable for High Yield Lead Free BGA Rework NEW! Movable top and bottom gas heaters. NEW! All Shuttle Star BGA Rework Stations are now available with...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 40mm x 40mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 40mm x 40mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 12 X 12mm
SRT, VJE, VJ Electronics BGA Rework Nozzle 12mm x 12mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
WDS-580 BGA & SMD Rework Station
A great entry level BGA Rework Station for jobs that don't require split vision assist camera. Features: 800 Watt Upper Component Heater &l...
Wisdomshow Model WDS-620 SMD & BGA Rework Station
This Model WDS-620 BGA Rework System has a Fixed Position, High Resolution Split-Vision Optical System for Removal, Placement, and Soldering of BGAs, CGA's, CSPs, QFPs, LGA's ...
WDS-650 SMD & BGA Rework Station
A lot of machine for an affordable price! The Model WDS-650 BGA Rework System has an 8mp High Resolution Split Vision Optical System for Removal, Placement, and Soldering of BGAs, CGA's, CSPs...
WDS-750 SMD & BGA Rework Station
The Model WDS-750 BGA Rework System has an 8mp High Resolution Split Vision Optical System for Removal, Placement, and Soldering of BGAs, CGA's, CSPs, QFPs, LGA's and Other S...
BGA Rework Station, Auto Pick & Place, High Resolution, Split Vision, Model SV560A
BGA Rework Stations from the BGA Experts with over 25 years rework process experience and customer support! For high volume BGA Rework on even the largest computer and networking boards! The model SV560A ...
RW-SV2000A BGA Rework Station
The Model RW-SV2000A BGA Rework Station is a top of the line BGA Rework Station desinged to rework large circuit boards and large components. It is Nitrogen Capable for High Yield Lead Free BGA Rework, has a movable top and...
Reflow Oven, Table Top
Easy to use. Just press the button. This infrared table top reflow oven comes with pre-programmed reflow profiles. Excellent for reballing BGA’s and small circuit board projects. A must have for your BGA Rew...
BGA Rework Station, Split Vision, Model SV550
Finally! A High End BGA Rework System at an affordable price. Starting at only $14,000.00 Fits board up to 25" Places components from 4mm to 120mm Standard resolution...
Products, services, training, and consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agent in North America for Shuttle Star BGA Rework Stations.
Oroville, California, USA
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer's Representative, Training Provider
99-0002 - PLCC Extractor
Flexible grips are manufactured from electrically conductive materials with a surface resistance of...
99-0012 - Pin Grid Array Extractors
Pin Grid Array Extractors are available in two sizes and provide a quick and safe way to extract Pin Grid Array components from their sockets. All component sizes can be accommodated, as the tool is available in two or four grip models. Adjusting...
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Millis, Massachusetts, USA
LSAW steel pipe ASTM A572
Longitudinal Submerged-Arc Welded Steel Pipe Process: LSAW - UO(UOE), RB(RBE), JCO(JCOE, COE); DSAW - Double Submerged Arc Welded Usage: Used for low pr...
RSTsteel pipe is professional steel products manufacturer and supplier.We produce Seamless Steel Pipe,ERW steel pipe,LSAW steel pipe,SSAW steel pipe according to your requirements.
No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116, China
BGA Reballing Services
SemiPack offers BGA Reballing Services with speed, reliability and affordability that are unrivalled in the industry. The Restriction of Hazardous Substances (RoHS) directive re...
SemiPack Services is an Electronic Manufacturing Support Service to the semiconductor industry. We specialize in providing support services to high-mix low-volume (HMLV) customers
Melbourne, Florida, USA
Datest: 30 years of testing and test engineering utilizing in-circuit, flying probe, boundary scan, and functional platforms. Also AXI/2D/3D x-ray, CT-scan failure analysis, and bonepile rehab of functional/field failures.
Fremont, California, USA
Process Equipment
Process Equipment Suppliers...
Refteck Solutions USA Inc. Chicago (HQ)
At Refteck, we offer professional expertise to facilitate all the procurement needs of our client's technical and management requirement through our customised solutions which are highly innovative, strategic and cost-efficient.
Schaumburg, Illinois, USA
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Other
AT-GDP Series - BGA / QFN / SMT Placement & Rework Stations
The AT-GDP Series BGA Rework Systems are semi-automatic machines featuring the latest vision and process control technologies. Lead-Free applications consisting of complex components such as BGA’s, CSP’s, QFN’s, Flip Chips, and o...
AT-707 Series BGA Placement & Rework Stations
The AT-707 series BGA Rework Stations are semiautomatic machines featuring spilt vision optics and precise software process control. Systems are used to rework various devices such as BGA’s, CSP’s, QFN’s, QFP’s, and other c...
Advanced Techniques US Inc. (ATCO)
Manufacturer of a BGA / QFN / SMT rework stations, reflow soldering equipment, reflow ovens, and smt pick and place machines.
Warminster, Pennsylvania, USA
PCB preheaters
After solder conversion to liquid state components dismounting is easy and safe http://www.selen.hr/pokaz_kategorie.php?cid=83...
SMD/PTH rework manual stations
Thru-hole components SMD components BGA, µBGA, CSP components http://www.selen.hr/pokaz_kategorie.php?cid=44...
Advanced BGA rework systems
Dedicated to complicated repair tasks on applications with BGA components http://www.selen.hr/pokaz_kategorie.php?cid=66...
Sales of electronic equipment, electronic machines and educations for electronics.
Zagreb, Croatia
Ersa HR 550 Powerful Hybrid Rework System
GUIDED REWORK! The HR 550 hybrid rework system addresses all users with highest requirements in terms of precision and process safety in electronic assembly rework applications. &...
Ersa HR 500 Hybrid Rework System
The Ersa HR 500 Hybrid Rework System is the first choice for all common rework tasks on medium-sized SMD assemblies. The system is suitable for desoldering, placing and soldering PLCC, QFP and BGA components as well as MLF...
Ersa HR 550 XL Hybrid Rework System
The Hybrid Rework System HR 550 XL is for all users who place the highest demands on precision and safety when reworking large assemblies. The HR 550 XL features a 1,800 W high-performance hybrid heating element that can...
Ersa HR 600 XL Rework System
With the Ersa HR 600 XL it is possible to professionally rework BTC components on big board assemblies. Boasting a heated area of 24 x 24 inch and a PCB thickness of up to 10 mm opens up rework capabilities in the segments of telecommunicati...
ERSA i-CON Soldering Stations & Heating Plates
The Most Intelligent Soldering Station in the World. Highest quality hand soldering via innovative technology. Guaranteeing quality in a lead-free environment puts the greatest demands on hand soldering applications. Today&...
Ersa HR 600/2 Hybrid Rework System
Ersa HR 600/2 – optimized, automatic component placement and precise temperature process control for all SMDs. The task formulated for the Ersa HR 600/2 Hybrid Rework System was to o...
Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.
Wertheim, Germany
UNICON Lead-free Soldering Stations
UNICON-107 - Lead-free soldering station (with safety device) With the world's first safety control sensor (patented). Light weight and easy to use, this is the best-buy of soldering stations....
Solder Jr. Series Soldering Station with Automatic Feeder
FEATURES For optimization - Solder Jr series supplies solder wire with just one click, which allows you to easily adjust quantity and delivery speed. Soldering quality will be stabled and enhanced due to the fixe...
Manufacturer of robotic soldering equipment including contact, laser and ultrasonic soldering available in several robotic platforms including desktop, SCARA, cartesian and six axis multi-articulated robots.
Tokyo, Minatoku, Japan
CD Soldering Station
An advanced compact station incorporating JBC technology in one self contained unit. The intelligent sleep and hibernation functions, which help extend tip life and save energy, works so well because JBC's extremely fast temper...
JT High-Power Hot-Air Soldering Station
The JT-2A is a high power hot air station used for desoldering all types of SMDs. Its powerful heater enables quick and safe desoldering of even the biggest QFPs and PLCCs. In addition, it desolders small and medium sized BGA&rsquo...
DIS Desoldering station with Electric Pump
For desoldering insertion components, desoldering high and medium precision insertion components and clean circuits with SMD. Includes: Control unit DI-2B Desoldering iron DR560-A with tip C560-00...
HD Heavy Duty Soldering Station
The HD is the best solution for high termal demand and prolonged heavy duty soldering. It is specially designed to solder intensively on multi-layer boards and on parts requiring high amount of heat. The temperature on the tip is s...
AL Automatic Solder Feed Station
This is the perfect solution for intensive soldering processes where one or two hands free are needed. It automates the soldering by solder feed system using the advantages of the JBC soldering station. The system is supplied conta...
NAST Nano Rework station
A complete station designed for micro soldering and desoldering of small-size components like chips 0201, 0402 etc. Tools for this station; Nano soldering iron NT105-A and nano tweezers NP105-A are the lightest, tiniest and ergonom...
Soldering & Rework Techniques for Electronics
Saint Louis, Missouri, USA
RD-500SV Denon BGA Rework
Most reliable machine to remove and re-install BGA components. Contact us for more info: T: 603-6142 4886 H: 6017-388 6607 E: seremban@chiphua.com...
JBC NASE Nano Rework System
The NASE Station is the best solution for soldering and rework of SMT components requiring the highest precision. Watch video for soldering examples. It works with the JBC Most Efficient Soldering System and the intellige...
CHIP HUA EQUIPMENT & TOOLS (M) SDN BHD
We are the trading company with more than 20 years of experience in the market of SMT & Semicon. Among brands that we carry are: Malcom, Kilews, JBC, Pace, Denon, Bonkote, Apollo, Ascentex, Memmert, Olamef, SEC, Dr Storage etc.
PETALING JAYA, SELANGOR, Malaysia
MFR-1100 Single Output Soldering, Desoldering & Rework Stations
The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1110 comes with one cartridge soldering hand-piece. The cartridge hand...
SBK-CHIPRP-KIT Solder Ball Placement Kit
Reworking small chip components like 01005, 0201, 0402, & 0602s are difficult and require specialized tools. Metcal has developed a technique and identified a selection of tools that enable the operator to rework these small componen...
HCT2-120 Digital Hot Air Pencil
The new HCT2-120 Hot Air Pencil is the latest addition to Metcal’s offering of convection rework tools. This digital handheld convection tool is ideally suited for light rework applications, which use smaller components and integrated circui...
PCT-1000 Programmable Preheater
The PCT-1000 is a programmable preheater that provides users the ability to increase heat capacity with highly controlled thermal output. The PCT-1000 can be used in a variety of processes including soldering, desoldering, SMD rework operations an...
HCT-1000 Programmable Hand Held Convection Tool
The HCT-1000 System is a fully programmable hand held convection rework tool that can both remove and place SMT components. It features digital controls, in-ternal or external thermocouple feedback control, program storage of up to 50 profiles and...
PS-900 Value Production Soldering - Single Output
The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. Features and Benefits: SmartHeat® temperature control Ergonomic, lightweight handle Rugged cast...
MX-500 Soldering, Desoldering & Rework - Dual Switchable
Metcal’s MX-500 Soldering and Rework System has been reimagined, adding features and a new look to a bench top icon. The system utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-r...
PCT-102-21 Focus Pre-heater, 230V with arm rest, free-standing board holder.
The PCT-100 Focus Pre-heater targets heat for improved speed and efficiency for high thermal demand applications, including lead-free. Used for SMT and through-hole hand processes, the PCT-100 uses convection air heating to heat a PCB first, for b...
MX-5210 Dual Port Simultaneous Soldering and Rework System
New Dual Port Simultaneous Soldering and Rework System highly effective for soldering applications including: lead-free, high mass components or boards, thermally sensitive components requiring low operating temperature, high volume production sol...
PS-900-SOLAR Solar Soldering System - Tip Hand-piece
The need to reduce PV manufacturing costs combined with the present shortage of polysilicon feedstock are driving a steady reduction in wafer and cell thicknesses. The PS-900-Solar Soldering System is the perfect solution Soldering of wires (tabs...
MFR-1351 Solder /Desolder System with Internal Pump
The MFR-1350 features a soldering hand-piece and a desoldering gun. The power supply has an internal pump providing 0.7 bar of vacuum suction force combined with Smartheat® technology that makes soldering, rework and through-hole desoldering e...
MX-5250 Dual Port Simultaneous Desoldering System
New Dual Port Simultaneous Desoldering System designed for plated-through-hole component desoldering. The easy-to-grip handle allows the task to be completed quickly and comfortably. This "shop-air" hand tool, in combination with the new...
MRS-1100A Advanced Modular Rework System
The MRS-1100A Modular Rework System is an integrated convection rework system for the removal and reflow of BGA/CSP and SMT components. The MRS-1100A is comprised of a hand held convection tool, preheater, adjustable tool holder, and free-standing...
MX-500UF Ultra Fine Soldering / Rework System
New MX-500UF Soldering and Rework System with UltraFine Soldering Hand-piece for soldering and touch-up of very small components, restricted access or high density component packaging on a PCB. The system utilizes SmartHeat®...
Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.
Cypress, California, USA
SWAM-Blaster® Conformal Coating Removal
Conformal Coating Removal for Micro Abrasive Blasting Micro Abrasive Blasting helps remove conformal coating with precision avoiding any damage to the target circuit boards. This is so useful in semiconductor, electronics and medic...
Crystal Mark manufactures, automates and provides service for precision micro abrasive blasting equipment.
Glendale , California, USA
BGA Rework Station - Estação de Retrabalho BGA
BGA-936UA : Eficiente, Confiável, Fácil de Usar Em ambientes de produção, manutenção e de pesquisa Com processos empregando solda convencional ou Lead Free Retrabalh...
AllPoint Electronics is specialized in SMT, PTH, and TEST Equipment and services for electronics industry in Brazilian market. We provide full support for PCB assembly factory implementation, and process consulting
Sao Paulo, Brazil
Board Repair Kit
Poor handling procedures may sometimes damage corners and edges on printed circuit boards. Most of these types of damage to PCB's can be repaired using the BEST Board Repair Kit. This versatile repair kit along with our clear...
Circuit Frames
BEST circuit frames come in both dry film and epoxy versions. We can produce circuit frames in 1 and 2 oz copper as well as with shiny tin or nickle gold coating. These circuit frames are microetched on the board side in order to insure better adh...
HeatShieldGel™ - Thermal Protection of Electronic Components During Reflow
BEST HeatShield Gel™ is a thermal shield water-based gel designed to be used in the PCB rework/repair or board assembly areas in order to provide thermal protection of electronic components. It is truly a revolutionary means to...
Reballing Preforms-EZReball™
The BEST EZReball™ process is the answer to your reballing problems. This BGA reballing process simplifies the process while eliminating the clean up of all those paper remnants, allowing for better yields and faster reballing times. The si...
PCB Pad Repair Kit
The BEST PCB pad repair repair kit gives you the tools you need for fast modification and repair of PCB circuit pads-no matter what their size. Our online PCB repair training videos, our master instructors along with these materials allows you to...
Circuit Trace Repair Kit
The BEST PCB circuit trace repair kit gives you the tools you need for fast modification and repair of PCB circuit traces. Our online PCB repair training videos, our master instructors along with these materials allows you to meet the original PCB...
HotDots™ for Holding Jumper Wires in Place
BEST HotDots™ are designed to simply and cleanly attach jumper wires on a board. HotDots™ are built to survive at high temperature as both the adhesive and the polyimide material are designed to withstand wash and reflow temper...
PCB Through-hole Repair Kit
Through-holes or vias can be damaged in the handling of PCB's or through the improper removal of a device. The BEST Through-hole Repair Kit can assist in the repair of these through-holes to make them look as good as new....
PCB Epoxy Repair Kit
The BEST PCB Epoxy Repair Kit can be used to repair lifted pads and traces as well as build up and repair edge corner damage to PCBs or repair solder mask which has been damaged or removed. By adding colorants a pcb color epoxy ki...
Gold Contact Replating Kit
The BEST Gold Contact Replating Kit includes the tools you need for fast replating and modification of circuit contacts. Edge contacts may require replating if they are contaminated with solder or become scratched during handling...
HeatShields™ Ceramic Thermal Shielding Material for PCB Rework
Protecting Heat Sensitive Components. Are you in need of a flexible method for shielding nearby components during the PCB rework process? Do you find yourself looking for an effective heat shielding product which can be eas...
PCB Circuit Traces
BEST PCB circuit traces are designed to help you repair, replace and modify circuit traces on PCBs. These materials allow you to meet original PCB quality standards as the board side is microetched for improved bonding area and bond strength....
BEST offers professional rework, repair and prototype builds of PCBs. Our expertise is on BGA rework and QFN rework. Our experienced instructors teach professional soldering classes as we are an IPC certified training center
Rolling Meadows, Illinois, USA
SMD Siemens splice tape
Siemens splice tapeDouble splice tape,Single splice tape.Panasonic splice tape ect Colour:yellow,blue.black with ESD. Size:8mm,12mm,16mm,24mm,32mm...
SMT filter
SMT filter for Yamaha,Panasonic,Sonny ect...
We are the trading company of SMT consumable and ESD products
Shenzhen, China
ASAP Aviation Unlimited provide premium aviation, aircraft tools along with NSN parts for both repair/maintenance and manufacturing purposes. Get the detail quotation for NSN, aircraft, electronic parts and aviation tools.
Irvine, California, USA
PCB assembly services from prototype to volume. SMT assembly specialists with over 20 years of experience. Fast & flexible service.
Telford, United Kingdom
RD-500III / SIII Rework System
Designed for Standard or Lead Free Solders, Large or Small Boards, Large or Small Components. Both the RD-500III and the RD-500SIII feature 700 watt upper and lower hot air heaters. By delivering hot air simultaneously f...
Design, development, and manufacture of soldering, desoldering, rework systems and tools for the electronics industry.
Tokyo, Japan
Hand Soldering & Rework Tools
Hand Soldering & Rework from Thermaltronics TMT-2000S TMT-5000S...
Circuit Repair Hand Tools
BEAU TECH Tool Kits Double End Miniture Size Double End Standard Size...
Products for the manufacturing of electronics from the circuit board assembly through final tested products.
ANNA, Texas, USA
Thermaltronics TMT-9000S Soldering & Rework System
The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....
Thermaltronics TMT-HA600 Hot Air Rework Tool
The TMT-HA600 hot air tool uses a large diaphragm pump and a high power 1300W heater, designed to work on more difficult applications, in the removal and reflow of surface mount components. Fast heating and temperature recovery...
Thermaltronics TMT-PH300 IR Preheater
The TMT-PH300 uses advanced intelligent temperature control technology to control the infrared preheater. Three heating modes allow the unit to handle leaded & lead-free preheating processes and are suitable for use with PCB containing BGA and...
Thermaltronics TMT-5000S Soldering & Rework System
The TMT-5000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....
Thermaltronics TMT-HA300 Hot Air Rework Tool
The TMT-HA300 hot air tool uses a large diaphragm pump and can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. Digital display shows temperature and status. Ai...
Thermaltronics TMT-2000S Soldering & Rework System
The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....
Thermaltronics TMT-HA200 Hot Air Rework Tool
The TMT-HA200 hot air tool can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. Auto sleep activated when hot air tool is placed in the holder. Lightweight and...
Thermaltronics DS-KIT-1 Desoldering Kit
Thermaltronics DS-KIT-1 desoldering kit for use on the TMT-9000S Soldering & Rework Station uses shop air to create a powerful air vacuum to clean through-holes quickly and efficiently. Cleaning and maintenance is quick and easy with the use o...
Thermaltronics TMT-HA050 Hot Air Rework Tool
The TMT-HA050 hot air tool can be used for the removal of surface mount components such as SOIC, QFP, PLCC and other similar devices. Digital display shows temperature and air flow Light, portable, plug and use tool...
Thermaltronics TMT-PH200 IR Preheater
The TMT-PH200 uses sensor control feedback loop to control the infrared preheater temperature and is suitable for leaded and lead-free preheating processes. Sensor control feedback loop to control temperature. Adjustable,...
Thermaltronics TMT-HA100 Hot Air Pencil
The TMT-HA100 hot air pencil is designed to remove and reflow small precision components, integrated circuits and other smaller devices. ESD safe design with integrated ground Specialized for work on precision components....
Thermaltronics TMT-ST10 Solder Tip Tester
The TMT-ST10 is a three-in-one tip tester, providing tip temperature measurement, tip to ground resistance and tip to ground AC voltage leakage.Test data can be easily saved to memory and exported for data analysis. Data save and ex...
Thermaltronics TMT-PH600 IR Preheater
The TMT-PH600 uses advanced, intelligent, control technology to accurately regulate the temperature of the infrared board preheater. Three heating modes allow the system to manage both leaded and lead free applications. Microprocess...
Southwest Systems sells capital equipment & materials for the electronic & semiconductor manufacturing industries. We cover Texas, Oklahoma, Arkansas, Louisiana, & Mexico except for the states of Sonora & N/S Baja California.
Anna, Texas, USA
TMT-5000S Curie Heat Technology Soldering and Rework Station
The TMT-5000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....
AF-KIT Auto Solder Feeder Kit
Thermaltronics AF-KIT auto solder feeder kit provides for single handed operation during soldering applications. The kit is provided as an accessory to existing Thermaltronics hand soldering tools. Adjustable speed, feed length...
TMT-PH200 IR Preheater
The TMT-PH200 uses sensor control feedback loop to control the infrared preheater temperature and is suitable for leaded and lead-free preheating processes. The Thermaltronics TMT-PH200 IR Preheater offers totally controllable and stab...
TMT-HA100 Hot Air Pencil
The TMT-HA100 hot air pencil is designed to remove and reflow small precision components, integrated circuits and other smaller devices. The Thermaltronics TMT-HA100 hot air pencil is a portable and flexible hot air rewo...
TMT-HA600 Hot Air Rework Tool
The TMT-HA600 is suitable for the more difficult applications in the removal and reflow of surface mount components. The TMT-HA600 hot air tool uses a large diaphragm pump and a high power 1300W heater, designed to work on more difficu...
TMT-ASTC100 Automatic Solder Tip Cleaner
The TMT-ASTC automatic solder tip cleaner helps rework badly oxidized tips. Two high quality brass brushes, which revolve in opposite directions, aid in the removal of oxidisation from the soldering tip. Removes tip oxidation...
TMT-2000S Curie Heat Technology Soldering and Rework Station
The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....
TMT-9000S Curie Heat Technology Soldering and Rework Station
The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....
TMT-ST10 Solder Tip Tester
The TMT-ST10 is a three-in-one tip tester, providing tip temperature measurement, tip to ground resistance and tip to ground AC voltage leakage.Test data can be easily saved to memory and exported for data analysis. Data save and...
TMT-HA300 Hot Air Rework Tool
The TMT-HA300 hot air tool uses a large diaphragm pump and can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA300 Hot Air Tool is a portable...
TMT-TC-2 Tip Tinner
The TMT-TC-2 Tip Tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Remo...
TMT-PH300 IR Preheater
The TMT-PH300 uses advanced intelligent temperature control technology to control the infrared preheater. Three heating modes allow the unit to handle leaded & lead-free preheating processes and are suitable for use with PCB containing BGA and...
TMT-HA200 Hot Air Rework Tool
The TMT-HA200 hot air tool can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA200 Hot Air Tool is a portable and flexible hot air rework syst...
TMT-PH600 IR Preheater
The Thermaltronics TMT-PH300 IR Preheater offers totally controllable and stable temperatures from 50°C – 400 °C. The Thermaltronics TMT-PH300 Infra red (IR) Preheater is ideally used in rework applications where background hea...
TMT-HA050 Hot Air Rework Tool
The TMT-HA050 hot air tool can be used for the removal of surface mount components such as SOIC, QFP, PLCC and other similar devices. The Thermaltronics TMT-HA050 hot air tool is a portable and flexible hot air rework s...
Manufacturer of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry.
Great Neck, New York, USA
PDR-XT5A Professional Ultimate Performance, BGA Rework System
The PDR IR-XT5P SMT/BGA rework system is specifically designed to be ultra-accurate and providing the ultimate performance when repairing today's PCB assemblies. Small -medium sized PCBs - SMDs, BGAs, uBGAs...
Premiere Distributor of Production Tools, Supplies, and Hardware for Electronic Assembly.
Shingle Springs, California, USA
American Beauty Soldering Replacement Parts
American Beauty soldering tools are built to last, but sometimes you need parts to keep your soldering equipment working properly. Stellar Technical understands this need and provides quality soldering supplies and parts for your American Beauty e...
Heat Guns & Heating Plates
Your ability to perform tough electronics jobs is dependent on how well you can control heat. Fortunately, the results of decades of innovation can be found within soldering supplies like our Steinel heat gun hardware. Heat guns are critical for r...
Hakko Desoldering & Rework Stations
Hakko is an excellent company, building effective soldering equipment that both amateurs and professionals have used for countless projects. Naturally, they continued their great track record when they produced the Hakko desoldering station select...
Novastar, APS Desoldering & Rework Stations
Not only do we carry desoldering and rework station supplies from brands like Hakko and Weller, Stellar Technical also offers excellent desoldering station supplies from brands like Novastar and APS. Making soldering corrections is a breeze when y...
Major supplier of soldering materials and equipment to U.S. industry. We offer a wide variety of products from premier manufacturers like Alpha Metals, Easy Braid, Microcare, Weller, Hakko, Xcelite & Erem among others.
Gardena, California, USA
SPA - R Selective Solder Rework System
The bench top machine SPA-R is a manual solder station to rework leaded components such as connectors etc. Due to RoHS conform electronics the lead free solder temperature raised which made the rework of THT components with a solder ir...
EBSO develops and manufactures cutting and bending machines for Thru Hole components and is a competent solution partner around Selective Soldering.
Hagenbach, Germany
Flason SMT Assembly line Auto BGA Rework Station Optical Alignment
http://www.flason-smt.com/product/SMT-Assembly-line-Auto-BGA-Rework-Station-Optical-Alignment.html Flason SMT Assembly line Auto BGA Rework Station Optical Alignment...
China BGA Rework Station factory
http://www.flason-smt.com/product/China-BGA-Rework-Station-factory.html China BGA Rework Station factory Demensions:L650×&#...
Automatic PCB foot cutting machine
Automatic PCB foot cutting machine Item: PCB foot cutting machine RPM: 4500 weight:115kg...
Automatic PCB foot cutting machine
Automatic PCB foot cutting machine Item: PCB foot cutting machine RPM: 4500 weight:115kg...
Auto BGA Rework Station Optical Alignment
http://www.flason-smt.com/product/SMT-Assembly-line-Auto-BGA-Rework-Station-Optical-Alignment.html SMT Assembly line Auto BGA Rework Station Optical Alignment...
Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.
shenzhen, China
PLS 861DE ESD Lead Free Rework Station
Three regular channels are "CH1", "CH2" and "CH3". Each channel's parameters including temperature and airflow can be set. Password protection and key-lock functions. Real time operat...
PLS 203G ESD Lead Free Soldering Station
High frequency current heating, fast heating and rapid thermal recovery. PLS203G soldering station is suitable for lead free soldering. Micro computer control. Set temperature only by pressing keys and calibrate it digitally. Au...
PLS 855PG ESD Programmable Rework Station
Only 10s needed to desolder IC. Password can be set to protect menu from inadvertent changes. Key-lock function can protect parameters from inadvertent changes. Excellent desoldering efficiency and speed. T...
BGA rework station
BGA rework station Features: 3 independent control heaters Precise optical alignment system (Panasonic automatic Vision Alignment System) Advanced int...
BGA Chip Desoldering and Soldering Machine
BGA Chip Desoldering and Soldering Machine Features: 3 independent control heaters: -Integrated design of top heater with efficient cerami...
TFT-LCD Laser Repair Machine
TFT-LCD Laser Repair Machine Support TFT-LCD LED Panel From 5″ – 80″ Including Mobile, Tablet, Laptop, Smart TV Screen. LCD Screen Resolution Support 1080P, 2K, 4K, 5K...
Infrared High Precision BGA Rework Station
Infrared High Precision BGA Rework Station Features: 1. Adopt high definition human-machine interface,PLC control. 2. Adopted linear slide make X,Y,Z axi...
PLS 967 ESD Soldering Station
Ceramic heating element has a super long service time. PLS 967ESD soldering station uses same soldering tips and heating element as international ones, resulting in easy replacement. Light handle is suitable for long time of use...
Hot Air Welding Gun PL340
Hot Air Welding Gun PL340 Features Various kind of stainless welding nozzle Heating Elements: thermostable ceramic and silver coated terminal. All of hot air guns passed dynamic ba...
Hot Air Welding Gun PL160
Hot Air Welding Gun PL160 The hot air welding gun suitable for surface mount soldering and rework parts, such as: SOIC, CHIP, QFP, PLCC, BGA, etc. it’s also used in welding hot melt plastic mater...
PLS850D ESD Rework Station
ESD safe design. PID controlled closed loop of sensor, rapid heating, precise and stable temperature. Suitable for soldering and de-soldering surface mounted ICs, such as QFP, PLCC, SOP, BGA etc. Intelligen...
BGA Rework Station
BGA Rework Station Features: 1, There are 3 independent heating areas, the 1st and 2nd are hot-air heaters, the 3rd is IR preheating area, temp precision is approximatel...
BGA Rework Station
BGA Rework Station Different Color Alignment System With adjustable hot air forcible guide Ultra large bottom heating (360x260 mm) High efficiency cooling system...
IR2015 IR Infrared BGA Rework System
IR2015 Infrared reflow soldering section of BGA rework system Infrared temperature sensor monitors BGA surface temperature directly, realize close loop control, ensure precise temperature technical window and even heat d...
IR2005 IR Infrared BGA Rework System
No need of nozzles, no airflow during re-flow process. Use non-contact infrared temperature sensor to measure temperature real-timely, and achieve closed loop control of temperature during rework process, especially suitable for...
.jpg)
Plastlist is a professional industrial solution provider, who is in engaged in design, manufacturing, equipment agency, material & accessories supply.
Taichung, Taiwan
MARTIN Expert 4.6 - Manual BGA Rework Station
The EXPERT 04.6 systems with Hot Air and IR Technology are complete rework stations for manual soldering of SMDs, residual solder removal and dispensing. Soldering profiles can be easily established and supported with the supplied software pack...
MARTIN Expert 10.6 - Automated Rework Station for SMT Components
The EXPERT 10.6 systems are rework stations that handle the complete rework process for SMDs. All versions utilize Auto Vision Placement Technology and are expandable with residual solder removal and dispensing functions....
Martin MiniOven-05 - Desktop Reflow Oven
Desktop Reflow Oven For Reballing and Prebumping of SMD Components The new MiniOven-04 is perfectly suitable for a wide range of applications, from small QFNs to very large BGAs. This is due to our extensive selection of stencil...
Martin HotBeam - Underheater
Underheater for demanding soldering Applications for underheaters range from pre-heating of PCBs for hand soldering tasks over pre-heating for automated machine rework to curing or cracking of underfill. MARTIN offers a...
Manufacturer of rework and reballing systems, hand soldering solutions, and micro-dispensing technologies
Manchester, New Hampshire, USA
PCB Modifications
TMS has over 15 years of expereience in jumper wiring and PCB modifications, with very fast turnaround options....
Team Manufacturing Services (TMS)
PCB & Cable Assemblers TMS was established over 25 years ago in Wokingham , Berkshire, as a cable assembly company trading under the name Robinson's Computer Technical Services. In 1993 the trading name was changed to Robinson's D
Wokingham, United Kingdom
SMD Infrared Preheating Station 853a
Technical data: Power supply: AC:220V(110V)50HZ Power consumption: 600W Goods weight: 3.08kg/pcs Inner box size: 28*31.5*18.5cm Oter carton size: 60*65*21cm Q'TY: 4PCS/CTN Mai...
BGA rework station aft500
Specification: Rated Power: 4000W Rated voltage:AC220V /AC110V optional The first upper zone power: 800W Second temperature lower power: 800W Lower part of the preheating temperature zone Power: 2400W...
BGA rework station cf260
Feature: 1. Adopt high standard materials(PLC, temperature table, heater) to allow better control of soldering/de-soldering process. 2. 3 independent heating areas from top to bottom. 3. (K Sensor) closed loop, independe...
SMD rework station 862d
Features: 1. 862/872 series uses the newest microcomputer processor PID program control technology, the precise digital show air gun and the iron temperature, the power is change bigger, the elevation of temperature is rapid, it won'...
The NO.1 One-Stop sourcing station in SMT & PCB Assembly industries with over 10 years of professional experiences,you can always get the high quality products with the cheapest price!
shenzhen, China
Bi58 Low-Temp. Lead-Free Soldering Kits For Lead-Free Heat-Sensitive Assembly
Qualitek's low temp. lead free soldering kits are a recommended lead free soldering alternative for heat sensitive assembly that requires a low melting point. The low melting point prevents thermal degradation of the heat sensitive c...
Global soldering materials manufacturer founded in 1980 headquartered in IL. U.S.A. Products include: RoHS lead free solders + leaded, Metals Recycling Program, Solder Check Up Program, Technical Support. ISO 9001:2015 Certified
Addison, Illinois, USA
DH-G620 New automatic infrared soldering station BGA machine for motherboard
Name: BGA Soldering desoldering Machine for motherboards repairing Condition: New Applicable Industries: Machinery Repair Shops, Manufacturing Plant, Retail, mobile phone assembly, Computer production and services, Repair sho...
Mobile phone ic bga chip motherboard rework machine
1.Product parameter Total Power 2500W Top heater 1200W...
Dinghua DH-A2 BGA rework station IC QFN BGA Macbook iPhone and communication equipment repairing
Product Details DH-A2 BGA Rework Station...
Two Top Heaters BGA Rework Station DH-360
Power: 4350W/4800W Top heater: hot air 450W, IR heater 800W Bottom heater: Hot air 1200W, Infrared 2700W Positioning: V groove, PCB support can be adjusted in X,Y direction and equipped with...
.jpg)
Automatic BGA rework machine Iphone Huawei mobile phone laptop motherboard repair station
Specification: Total Power 5200W Top heater 1200W...
The latest BGA rework machine DH-5880
Condition: New Machine Type: Machine for soldering&removing a chip Applicable Industries: Machinery Repair Shops, Manufacturing Plant, Retail, Personal repair shop, Repair shop, University Laboratory After Warranty Serv...
Shenzhen Dinghua Technology Development Co., Ltd.
Shenzhen DingHua Technology Development Co., Ltd., is a top professional and biggest manufacturer of BGA rework station, CNC engraving machine, Automatic screw locking machine and Soldering machine etc.in Shenzhen,China.
Shenzhen, China
We repair BGA and rework Surface Mount Components
Port Orange, Florida, USA
ECO Rework
Visit PSI's main ECO Rework page for more information. PSI's experienced team accomplish your ECO modifications, while you avoid delays, respins and scrapped assemblies. Al...
BGA Reballing Services
Visit PSI's main BGA Reballing Services page for more information. PSI has over 20 years experience reballing BGA devices of every size, pitch, and package style:...
Coplanarity Service / Lead Straightening
Visit PSI's main Coplanarity Services page for more information. PSI has over 20 years experience restoring gull wing leads on QFP and SOIC packages, a...
SMT & PCBA Laboratory Services, X-ray inspection, BGA rework, BGA Reballing, Solder Failure Analysis, SMT Assembly Process Validation, SMT Assembly Process Training & Consulting.
Leander, Texas, USA
Consultant / Service Provider, Manufacturer, Research Institute / Laboratory / School
2.jpg)
Our main products are: distributed control system (DCS), programmable logic controller (PLC), large servo control system. The spare parts we sell are guaranteed for one year and are rigorously tested and certified.
XIAMEN, China
BGA Rework Station PRO-880+
PRO-880+ is equipped with 100x camera, 4 thermocouple for real time profiling, 12 bottom heater and Panasonic servo moving system, can positioning, dismantle, pick&place, soldering automaticlly. Patently designed with movable upper/bottom hea...
Online X-RAY Chip Counter Machine X-Chip-A350
This X-RAY chip counter machine can greatly improve the production efficiency, to realize the automation and electronic components inventory management information, the main principle through X-ray penetrate the imaging principle of image information...
Inline SPI Machine S-250I/S500I
Inline SPI Machine S-250I/S500I were designed to make in-house Inline SPI , This series SPI apply to small and normal size PCB , and satisfy customers with small investment to inspect printing quality, moving convenience, simple operation and high ac...
.jpg)
BGA Rework Station ECO-S550
ECO-S550 is an economical BGA rework station with touch-screen control, 3 individual heating, programmable up/bottom heating, laser pointer assistant for manual position. Can satisfy most of BGA rework requirement....
Entry-Level BGA Rework Station
Safe,precision rework for SMD, BGA and LED chips. The versatile BAS400 rework station combines precision, reliability and affordablility in an all-in-one solution for all your rework needs, from complex,densely populated...
THT Component Automated Inspection System
DA-1200 is a new kind of automtaic AOI equipment for THT component with high cost performance, which can be easily installed on the existing production line . It can automatically inspect defects of THT compoments instead of the traditional manual in...
BGA Rework Station BAS-400
Safe, precision rework for SMD, BGA, and LED chips. The versatile BAS400 rework station combines precision, reliability, and affordability in an all-in-one solution for all your rework needs, from complex, densely populat...
BGA Rework Station ENT-300
ENT-300 has been developed for small PCB Reworking that optimized for the Min 20*20mm to Max 310*370mm such as mobile phone, navigation. Price competitiveness has increased effectiveness when working with a small PCB by removing the expensive IR heat...
Benchtop solder paste thickness inspection BT-460
Solder paste thickness inspection BT-460 is mainly used to measure the thickness of solder layer on PCB. Its principle is that a very thin laser beam is emitted by the laser to illuminate the PCB at a certain Angle, and then the camera is used to obs...
Detection Equipment-CX-3500
CX-3500 is use to examine internal solder joints, BGA, IC and other complex components.It adopts the structure of high resolution enhanced screen and sealed microcoking X ray tube combination, through X-ray non-destructive fluoroscopy, real-time obse...
Inline SPI Machine S-510I
Inline SPI Machine S510I were designed to make in-house Inline SPI , This series SPI apply to small and normal size PCB , and satisfy customers with small investment to inspect printing quality, moving convenience, simple operation and high accuracy,...
BGA Rework Station Master-1000
Master-1000 loaded with features that make it the industry"s most reliable and affordable solution for the widest range of SMT repairs. Safe Removal, High-Precision Placement, and Perfect Soldering for Any SMD Repair Applications....
BGA Rework Station PRO-660
PRO-660 is the strengthen version of Pro-650. With all the function 650 have, it can handle bigger PCB....
Desktop SPI Machine S-350/600
S-350/S-600 series offline SPI were designed to make in-house offline SPI , This series SPI apply to small and normal size PCB , and satisfy customers with small investment to inspect printing quality, moving convenience, simple operation and high ac...
X-RAY Chip Counter Machine CCM-470
This X-RAY chip counter machine can greatly improve the production efficiency, to realize the automation and electronic components inventory management information, the main principle through X-ray penetrate the imaging principle of image information...
Detection Equipment- CX-3000A
CX-3000A is use to examine internal solder joints, BGA, IC and other complex components.It adopts the structure of high resolution enhanced screen and sealed microcoking X ray tube combination, through X-ray non-destructive fluoroscopy, real-time obs...
BGA Rework Station PRO-650
Pro-650 is the most popular BGA rework station with touchscreen control, 3 individual zone, 6 bottom heater with height adjustable, programmable up/bottom heating, 50X high resolution camera system, 3 thermcouple for real-time profiling....
1 CLICK SMT TECHNOLOGY CO., Limited
Manufacturer of selective soldering machine, soldering robot, reflow oven, wave solder machine, pcb handling machine. Distributing for Turnkey line include SMT line, conformal coating lines, through hole line.
Dongguan City, China
ZM-R720A BGA SMD Rework Station
ZM-R720A BGA SMD Rework System Stable and Uniform Hot Air Heating System Lower Heater Adjustable Carbon Fiber Micro-crystalline Infrared Preheater High-Precision PID Temperature Control Sys...
ZM-R8650 Full Automatic BGA Rework Station with N2 Capacity
ZM-R8650 BGA Rework System Stable and Uniform Hot Air Heating System Lower Heater Adjustable Extreme Large Carbon Fiber Infrared Pre-heater High-Precision PID Temperature Control Sy...
Manual BGA Rework Station ZM-G500
BGA Rework Station ZM-G500 Entry Level BGA Rework Ststion Stable Hot Air Heating System Carbon Fiber Infrared Pre-heater Manual Placement, Desoldering Real-ti...
ZM-R7220A BGA Rework Station
ZM-R7220A BGA Rework Station Stable and Uniform Hot Air Heating System Lower Heater Adjustable Carbon Fiber Infrared Pre-heater High-Precision PID Temperature Control System Indu...
ZM-R720 uBGA/LED SMD Rework Station
ZM-R720 BGA/LED Rework Station Stable and Uniform Hot Air Heating System Lower Heater Adjustable Carbon Fiber Micro-crystalline Infrared Preheater High-Precision PI...
Manual BGA Rework Station ZM-R5860
BGA Rework Station ZM-R5860 Entry Level BGA Rework Ststion Stable Hot Air Heating System Lower Heater Adjustable Carbon Fiber Infrared Pre-heater HD Touch Scr...
ZM-R6200 Semi-automatic Rework Station
ZM-R6200 BGA Rework System Stable and Uniform Hot Air Heating System Lower Heater Adjustable Carbon Fiber Infrared Pre-heater High-Precision PID Temperature Control System...
ZM-R6823 Rework System-Nitrogen Capacity
ZM-R6823 BGA Rework System Stable and Uniform Hot Air Heating System Lower Heater Adjustable Carbon Fiber Micro-crystalline Infrared Preheater External Air (N2) Supply Control S...
Seamark ZM Technology Group Co.,Ltd
Seamark provide SMT equipments and services including pick and place machine, solder paste printing, pcb handling, rework and repair, x-ray inspection, soldering material, defects inspection and analysis tool.
ShenZhen, China
Scotle HR6000 BGA Rework Station
Scotle HR6000 BGA Rework Station Products Description Scotle HR6000 is a two temperature zones BGA rework station, and the top is hot air head and bottom is infrared heater. Scotle HR6000 is designed by an excellen...
Scotle-HR360 BGA Rework Station
Scotle-HR360 BGA Rework Station Products Description Scotle-HR360 BGA rework station is with 7.2 inch touch screen. Scotle-HR360 applies ARM32 bit microprocessor. Scotle-HR360 can generate...
Manufacture and Suppy BGA Rework Stations, Soldering stations, Reflow ovens, preheaters, Digital Oscilloscopes, Power Supplies, Soldering Stations, Digital Multimeters, and all other SMD Accessories
North Brunswick, New Jersey, USA
BGA rework BGA welding BGA welding equipment
BGA rework BGA welding BGA welding equipment Power source: AC220V±10％ 50/60Hz Work rate: 4500 W Heating power:...
Goodluck Electronic Equipment Co., Ltd
Goodluck Electronic Equipment Co.,Ltd.is highly professional in Surface-Mount Technology area and supports most major brands of electronic assembly equipment with a large selections of compatible SMT automotive spare parts.
Shenzhen, China
Solder, Desolder & Rework Equipment
Solder, Desolder & Rework equipment from Chemtronics, Easy Braid, TechSpray, Xuron, Edsyn, Hakko, Hexacon, Metcal, OKI, PACE, Weller, Plato, BeauTech, CircuitWorks, Excelta, Menda, Aven. Desoldering Wick Iron...
Since 1978 Kimco Distributing Corp. has been a major supplier of products, services, and solutions to the manufacturing, testing, and repair environments.
Mentor, Ohio, USA
kurtz ersa
Award winning and patented rework & inspection systems: For over 15 years now, thousands of users worldwide benefit from Ersa´s patented IR- and HR-Rework technology. In addition to their outstanding cost/price ratio, Ersa sys...
Technical Resources Corporation
Manufacturers' Representative covering Florida, Puerto Rico and the Dominican Republic. TRC specializes in electronics assembly, inspection, repair equipment and synergistic products.
Boca Raton, Florida, USA
Seamark Zhuomao Semi-automatic SMD rework station ZM-R720A for BGA and LED Repair
ZM-R720 Features Features &nbs...
.jpg)
Zhuomao Automatic BGA rework station ZM-R6200 for cellphone/laptop/PSP motherboard repairing with optical alignment
We provide X-ray inspection machine for SMT. Contact Rita Li by whatsapp:0086 134 3448 1030 skype:ritaleeli Email:sales11@zhuomao.com.cn Zhuomao Automatic BGA rework station ZM-R620...
China TOP 1 led module repairing machine ZM-R720 for P1,P1.2,P1.5,P2 LED soldering and desoldering
China TOP 1 led module repairing machine ZM-R720 for P1,P1.2,P1.5,P2 LED soldering and desoldering ...
Optical bga rework station ZM-R6500 for large motherboard pcba and X399 SP3R2 4094 PIN repairing
Optical bga rework station ZM-R6500 for large motherboard pcba and X399 SP3R2 4094 PIN repairing We provide customized BGA machine, you are welcome to contact Rita Li by whatsapp/wechat/viber:0086-134 3448 1030...
Seamark top selling optical motherboard BGA chip rework station ZM-R6200 for laptop/mobile PCBA chip soldering and desoldering
Seamark top selling optical motherboard BGA chip rework station ZM-R6200 for laptop/mobile PCBA chip soldering and desoldering More information(Rita Li):Whatsapp/Wechat/Viber:0086 134 3448 1030...
Seamark Zhuomao full automatic rework equipment ZM-R6823 motherboard chip soldering and desoldering equipment
Seamark Zhuomao full automatic rework equipment ZM-R6823 motherboard chip soldering and desoldering equipment Contact Rita Li by Whatsapp/Wechat/Viber:0086-134 3448 1030 Specificati...
Zhuomao ZM-R6200 BGA Chip Removal Machine for Motherboard IC Repair
Zhuomao ZM-R6200 BGA Chip Removal Machine for Motherboard IC Repair Product Application Factort price automatic bga replacing machine iphone motherboard repair station ZM-R6200 c...
Automatic Bga rework station ZM-R6200 for SMT chip soldering and desoldering
BGA Rework station and NDT X-ray inspection system is avaliable, contact Rita Li for more information by : Skype:ritaeeli Email:ritaleeli0809@gmail.com whatsapp:0086 134 3448 1030 Automat...
Top selling BGA chip rework station Seamark ZM-R6200 for laptop/mobile PCBA BGA chip IC soldering and desoldering
We provide SMT inspection and repairing equipment, you are welcome to contact Rita Li by: whatsapp:0086 134 3448 1030 SKype:ritaleeli Email:sales11@zhuomao.com.cn...
2019 updated optical alignment BGA rework station ZM-R6823/7830A for smt bga chip repairing
Seamark semi-automatic optical alignment BGA rework station ZM-R6823/7830A for smt bga chip repairing...
Newest BGA/LED repairing machine ZM-R720A for small component chip soldering and desoldering
Newest BGA/LED repairing machine ZM-R720A for small component chip soldering and desoldering We provide customized SMT inspection and repairing solution , Contact me for more information: whatsapp/wechat...
Zhuomao ZM-R6823, led panel mobile,xbox 360,ps3, ps4, Laptop repair machine
We provide mirco focus X-ray inspection machine and BGA rework station solution Since year 2005. Contact me for more information: whatsapp:0086 134 3448 1030 skype：ritaleeli...
Mobile phone motherboard repairing equipment for all brands cell phone ZM-R6200 with alignment system
Application This machine is used for repairing the broken BGA (Ball Grid Array package) chipset on the PCB motherboard. 1. Laptop & desktop PCBA 2.Game console,such as Xbox one,Play Station 4...
Cheap optical BGA rework station ZM-R6110 hot air bga rework station for SMT/PCBA chip replacement
Cheap optical BGA rework station ZM-R6110 hot air bga rework station for SMT/PCBA chip replacement Usage: desolder, clean, reball, solder, replace BGA, FBGA, CBGA, QFP chips of desktop computer, lapt...
Semi-auto BGA Rework Station Optical Alignment BGA Rework Machine seamark ZM-R6200
SMT solution provider with X-ray inspection machine, X-ray components counter and BGA repairing machine Contact me for more information: Skype:ritaleeli Email:sales11@zhuomao.com.cn Whatsapp/wechat:...
Seamark Zhuomao high fully automatic BGA rework station ZM-R8650 with vision alignment system for motherboard repairing
Seamark Zhuomao high fully automatic BGA rework station ZM-R8650 with vision alignment system for motherboard repairing We provide customized BGA rework solution, you are welcome to contact me （Rita Li...
Seamark Zhuomao High-End optical BGA rework station ZM-R6823 for smt
Different level BGA rework station and cusomized service provided, contact Rita Li for more information: whatsapp/wechat:0086 134 3448 1030 Email:sales11@zhuomao.com.cn Skype:ritaleeli ZM...
Update LED/BGA rework station ZM-R720 for LED beads repairing/replacement
Update LED/bga rework station for micro chip repairing. We are manufacutrer for X-ray inspection and bga rework station Contact Seamark Zhuomao for more information Main Features of ZM-R720A Bga rework station...
Seamark Zhuomao High-End optical BGA rework station ZM-R6823 for smt
Different level BGA rework station and cusomized service provided, contact Rita Li for more information: whatsapp/wechat:0086 134 3448 1030 Email:sales11@zhuomao.com.cn Skype:ritaleeli ZM...
Automatic motherboard IC CPU repair ZM-R7830A mobile ic repair machine
We provide inspection and repairing solution for SMT. X-ray inspection machine& BGA rework station & X-ray SMD parts counter Contact information: Rita Li whatsapp/wechat:0086 134 344...
Seamark Zhuomao Photoeletric technology(Shenzhen)CO., ltd
We focus on SMT Inspection and repair since year 2005 and now we are largest BGA rework station manufacturer in China!We provide X-Ray Inspection System,X-ray SMD component counter,BGA Rework System, LED/LCD panel repairing
Shenzhen, China
Easy Braid PCB Hand Soldering / Rework Products
Easy Braid’s replacement soldering tips and rework stations provide power, performance, and reliability. The EB9000S, EB5000S, and EB2000S Soldering Rework Stations are based on Curie Heat Technology, a very precise and self-regulating sc...
EB Solder / Rework Stations
Easy Braid’s replacement soldering tips and rework stations provide power, performance, and reliability. The EB9000S, EB5000S, and EB2000S Soldering Rework Stations are based on Curie Heat Technology, a very precise and self...
Desoldering Braid / Wick
Desoldering braid (wick) is copper braid used in the rework and repair of printed circuit boards, computers, cell phones, or other electronics. Electronic components are often mounted on a circuit board and careful desoldering of components res...
A manufacturer of desoldering braid (wick) with an emphasis on continuing advancement in soldering/desoldering technology, visual and x-ray inspection systems, fume extraction, and solder paste inspection systems.
Minneapolis, Minnesota, USA
Scotle IR360 Pro 2 in 1 Infrared BGA Rework Station
Scotle IR360 PRO is a 2 in 1 BGA rework station which can be used as infrared BGA rework station and hot air BGA Rework station with three independently temperature zon...
Scotle Technology Group Limited
Scotle Founded in 2006,a manufacturer for Scotle BGA rework stations, and other SMD rework accessories. Scotle accept OEM and ODM worldwide. Top quality, best service is always the persuit of Scotle.
Shenzhen, China
15Years! Seamark ZHUOMAO SMT/repair shop ZM R7220A with CCD camera Motherboard Repair BGA Rework System
Product Description High Perfomance bga rework station heater ZM R7220A with CCD camera Product Application ZM-R7220A BGA rework station is the hot selling bga rework station during...
Seamark zm LED BGA Rework Station ZM-R6200 & ZM R720 Hot air gun soldering machine
Semi-automatic BGA Rework Station ZM-R6200 WhatsApp/wechat/Skype：+86 18779975930 Email: sales25@zhuomao.com.cn China Biggest BGA Rework Station Manufacturer Repairing...
.png)
Seamark ZM PCB BGA X-ray Inspection system Equipment -14 years experience in SMT field, Our experience will provide good solutions. X-Ray Inspection, BGA reworks tation,Full auto X ray SMD component machine
Shenzhen, China, China
E3M SMD Rework System for Micro Re Work
PDR E3M Rework System for Micro SMD Rework is made of only the finest materials and components for Micro- BGA Rework, 0201 Rework, CSP Rework, uBGA Rework, LED Rework, area Array Rewor...
E3S Rework Station Designed for BGA Packages - SMD Rework
The PDR E3S SMD Rework Station offers dual closed loop feedback for advanced BGA Repair, QFN Repair, Flip Chip Repair, DFN repair, QFP's, SOIC's and more, and is is engineered wit...
E3G BGA Rework Station
The PDR E3G Evolution - Next Generation Rework System - is made of only the finest materials and components for optimum precision and rework excellence. Combining PDR's ThermoActive software...
PDR D3Vi Lower Cost Discovery Series Rework Station for PCBs upto 12
Professional SMD Rework Station for PCBs upto 12"/300mm. The PDR IR-D3Vi Discovery provides all the essential features for quality rework and is made of only the finest...
IR-E6 Evolution BGA Rework Station for PCB's up to 24
Ultimate Performance, BGA Rework Station for small-large PCBs up to 24"/620mm The PDR E6 XL BGA Rework Station is made of only the finest materials and components for optimum precision and rework excellenc...
PDR IR-C3 Chipmate Entry-Level SMD/BGA Rework Station
The PDR IR-C3 Chipmate is designed specifically for the removal and replacment of SMT components and connectors when high-end optical placement systems are not required. The system easily tack...
PDR IR-C3i Entry Level Software Controlled Focused IR Rework System
The PDR IR-C3 Chipmate - Auto Profile Software Controlled Focused IR Rework System utilises PDR's ThermoActive Suite Software and is designed specifically for the removal and replacment of SMT/SMD compo...
PDR manufactures IR BGA rework stations, BGA rework equipment, and SMD rework stations. SMD soldering solutions for BGA Rework, CSP Rework, QFN Rework, LED Rework, 0201 Rework and more. Also offers thermal test equipment. est.1987
Shingle Springs, California, USA
