Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
I have a problem with 0805 caps and resistors randomly falli...
- Feb 19, 2003
by
RyanM
Consider that:
* Something may be wrong with your glue. [Th...
- Feb 19, 2003
by
davef
Interesting topic, I got a side bar question. The epoxy com...
- Feb 20, 2003
by
LarryK
Hi
I guess I would call Locktite.
I see David F expect...
- Feb 21, 2003
by
Call your glue manufacturer. It sounds to me that the epoxy ...
- Feb 21, 2003
by
Everyone is suspecting the epoxy. I'm just trying to underst...
- Feb 21, 2003
by
LarryK
Because it's not limited to one part type and he's verified ...
- Feb 21, 2003
by
Steve Thomas
Are you 100% positive that the parts are on before wave? I ...
- Feb 21, 2003
by
RDR
Make sure your epoxy dispenser is repeatable. DO an experime...
- Feb 21, 2003
by
jersbo
In the early days of SMT we were using vibratory bulk feeder...
- Feb 22, 2003
by
Stefan Witte
Larry,
Without being real clear on your process, as to wh...
- Feb 23, 2003
by
davef
Just an update on my problem. I spoke to Loctite and they h...
- Feb 24, 2003
by
RyanM
Every time this problem was brought to me, handling was the ...
- Feb 24, 2003
by
CC to myself
Dave,
I went into their website. Unfortunately, they do not...
- Feb 24, 2003
by
LarryK
Having worked with adhesives for years, the first thing to l...
- Feb 24, 2003
by
Larry,
CSL used to publish the whole article online. Now...
- Feb 24, 2003
by
davef
Hi
Claude and the next person gave some good advice I wou...
- Feb 24, 2003
by
Ryan,
You are spot-on with your analysis of the 'flattene...
- Feb 24, 2003
by
davef
Hi
Locktite is telling you to cure first, maybe for a...
- Feb 25, 2003
by
Hi
Up above in his operation / process description after ...
- Feb 25, 2003
by
Dave,
I had to contact Circuits Assembly, but I got the art...
- Feb 26, 2003
by
LarryK
Hi,
We dealt with and solved this problem here at Agilent...
- Mar 03, 2003
by
mr
Please inspect the pcb were the components were "lost"
Chec...
- Mar 11, 2003
by
I look at boards coming out of the oven top side and bottom
...
- Mar 21, 2003
by
I Like your analysis here.
I dunno the whole story, but I'v...
- Mar 26, 2003
by
DL
RyanM