Electronics Forum | Wed Jun 22 09:12:57 EDT 2005 | bsudak
Our manufacturing site has been struggling with soldering Alloy 42 TSOPs. Currently, we have to hand solder in one of our applications. Here are the particulars. Component: 54 leads, Sn plated, 400microinches +/-200. Process: Eutectic 63/37 Sn/Pb
Electronics Forum | Tue Jun 28 12:12:17 EDT 2005 | Paul
I'm with DaveF on this one. I think you'll be trying solve this one for a long time. Alloy42 just doesn't like to be soldered. What exactly is the issue? Lack of a toe fillets at on the cropped lead? There is no spec for a toe fillet other than to
Electronics Forum | Thu Mar 31 19:52:50 EST 2005 | davef
We agree with Russ that you're talking palladium instead of platinum. Your wetting problem likely is not the Pd-Ag surface layers, but the underlying metal or nickel to which you need to wet. Either a base metal is: * Contaminated and poorly wettabl
Electronics Forum | Wed Apr 06 21:37:35 EDT 2005 | KEN
Are you saying you have solder balls (as in solder paste balls) at the lead tips (or land tip)? This means your thermal profile is not hot enough. why the sudden cahnge? I will bet the lead frame material was copper and is now alloy 42. sounds like
Electronics Forum | Mon Jul 04 09:01:22 EDT 2005 | Rob
Hi, I don't know if it will help but we talked about soldering Nickel on this thread: http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=8051Message31803 where we used Cobar solder paste for soldering all types of
Electronics Forum | Tue Sep 30 21:00:41 EDT 2003 | davef
We're not clear on what you seek. So, as a starting point for our discussion, we wouldn't get agitated if we saw "routine" coplanarity of 4 thou. For instance: Maximum Lead Coplanarity [Altera] Package||Acronym||Lead material||Finish||Maximum Lead
Electronics Forum | Tue May 23 20:44:13 EDT 2000 | Dave F
Sal: You and Wolfgang are spot on, but let's see if we can blow this out a bit. Before proceding to rattle on ... � PC Card. A credit card-size computer peripheral that add memory, mass storage, and I/O capabilities to computers in a rugged, compa
Electronics Forum | Wed Oct 01 13:39:13 EDT 2003 | arturoflores
They take the solder in a dip and look solderability test but when in normal reflow process we got some pins that do not get wet and the appearance is as follows: -Pillow effect on the toe(no front fillet is formed) -There is a sheet of flux between
Electronics Forum | Wed Jun 29 17:38:16 EDT 2005 | GS
Several years ago, we had almost same pbm, best results have been obtained by using water soluble paste (those time the old AM1208). Any way, to get a good toe meniscus is not so easy. Talking about CTE, keep in consideration the internal die of TSO
Electronics Forum | Tue Oct 15 17:54:08 EDT 2019 | davef
From J-STD-001: Components designed for pin-in-hole application and modified for butt connection attachment, or stiff-leaded dual-inline packages (e.g., alloy 42, brazed or tempered leads) may be modified for use on Class 1 and 2 products but shall n