Electronics Forum | Tue Apr 01 18:42:18 EST 2003 | rdr
Well, here is what I have found so far. I have removed the top of the BGA and found that the ball had detached from the package. Three balls were removed with the two adjacent balls pulling the pads off the board and stayed attached to the BGA while
Electronics Forum | Mon Jan 18 10:49:22 EST 2010 | pcbrookie
Hello all, One of our resistor arrays is becoming detached from its balls after reflow. This is the second instance of this happening. The balls are clearly soldered to the board, but the actual package is coming off (package pads are quite bare).
Electronics Forum | Fri Aug 06 10:27:05 EDT 1999 | Kenneth Hedman
| | I saw the problem of void in solder bump or in lead less component or some BGA. But I didn't have standard specification of that void is accept or reject? Do any body have the better idea or suggestion of the criteria ? | | | | Thank you, |
Electronics Forum | Fri Jan 15 13:35:03 EST 1999 | Terry Burnette
| I saw the problem of void in solder bump or in lead less component or some BGA. But I didn't have standard specification of that void is accept or reject? Do any body have the better idea or suggestion of the criteria ? | | Thank you, | Wirat
Electronics Forum | Tue May 23 11:06:53 EDT 2000 | Michael Parker
Kathy- Greater than 88%. Is that 3-D Nicolet? I had a conversation with Arline yesterday, she told me about your trials and tribulations with re-balling. I would like to suggest you try micro-stencil instead. If your BGA rework center has the capabi
Electronics Forum | Fri Oct 08 17:03:03 EDT 1999 | Dave F
| Hi, | | Help! Could anyone help to enlighten me on this? | | Question: | | If I have a CSP/BGA package of size X by Y and the standoff gap between the component and PCB is Z, What is the maximum allowable Y/Z or X/Z that using a normal water cl
Electronics Forum | Fri Nov 03 12:06:07 EST 2006 | mika
Interesting. We are also facing this problem due to; once in a while a matrix tray is mishandled by the operators and as a result those very, very expensive components falls to the floor and the columns got bent. We manage somethime to "straighten th
Electronics Forum | Thu Jul 12 21:58:10 EDT 2007 | davef
Bill 1 Systems for BGA, Flip Chip, CSP and Bump measurement are: * UBM [550 Weddell Dr, Suite 3, Sunnyvale, CA 94089; 800-731-1220 f408-541-0153 contact@ubmusa.com ubmusa.com] ScanView, AutoScan and LaserScan. * Integrated Packaging Assembly; 2221 Ol
Electronics Forum | Tue Jul 27 16:22:17 EDT 1999 | Earl Moon
| I'm working on a prototype board that requires a 600 pin BGA. This is a metal top BGA being placed on a 11" x 17" PCB about .62" thick. | | The part is 1.77" square with a 50 mil pitch and 30 mil bump diameter. The bumps are located on the
Electronics Forum | Tue Sep 25 14:08:59 EDT 2001 | davef
Oooo, the solder on the pad and PGA ball is flowing during reflow down the via to the secondary side? Why didn�t you say so?? ;-) Why would you expect that gravity and capillary action wouldn�t force solder to flow down the solder plated via to the