Technical Library | 2020-11-04 17:57:41.0
Residues present on circuit boards can cause leakage currents if not controlled and monitored. How "Clean is Clean" is neither easy nor cheap to determine. Most OEMs use analytical methods to assess the risk of harmful residues. The levels that can be associated with clean or dirty are typically determined based on the exposed environment where the part will be deployed. What is acceptably clean for one segment of the industry may be unacceptable for more demanding segments. As circuit assemblies increase in density, understanding cleanliness data becomes more challenging. The risk of premature failure or improper function is typically site specific. The problem is that most do not know how to measure or define cleanliness nor can they recognize process problems related to residues. A new site specific method has been designed to run performance qualifications on boards built with specific soldering materials, reflow settings and cleaning methods. High impedance measurements are performed on break off coupons designed with components geometries used to build the assembly. The test method provides a gauge of potential contamination sources coming from the assembly process that can contribute to electrochemical migration.
Technical Library | 2021-06-15 18:40:53.0
The jet printing of a dense mixed non-Newtonian suspension is based on the rapid displacement of fluid through a nozzle, the forming of a droplet and eventually the break-off of the filament. The ability to model this process would facilitate the development of future jetting devices. The purpose of this study is to propose a novel simulation framework and to show that it captures the main effects such as droplet shape, volume and speed. In the framework, the time dependent flow and the fluid-structure interaction between the suspension, the moving piston and the deflection of the jetting head is simulated. The system is modelled as a two phase system with the surrounding air being one phase and the dense suspension the other. Hence, the non-Newtonian suspension is modelled as a mixed single phase with properties determined from material testing. The simulations were performed with two coupled in-house solvers developed at Fraunhofer-Chalmers Centre; IBOFlow, a multiphase flow solver and LaStFEM, a large strain FEM solver. Jetting behaviour was shown to be affected not only by piston motion and fluid rheology, but also by the energy loss in the jetting head. The simulation results were compared to experimental data obtained from an industrial jetting head.
Fraunhofer-Chalmers Research Centre for Industustrial Mathematics
Easy-operation! Save energy! Good Price ! Environment friendly! Windows XP operation software with Chinese and English alternative. Whole system under integration control can analyze and display the failure. All production data can be saved comp
Industry News | 2008-11-20 11:26:52.0
Hybrid ball screws using ceramic rolling elements.
Industry News | 2009-02-06 14:38:20.0
GREELEY, CO �FCT Assembly announces its five-year anniversary. In 2004, Florida Cirtech decided to break off its assembly product division and start FCT Assembly. Since that time, FCT has seen growth of more than 400 percent.
Industry News | 2016-02-03 12:26:42.0
KYZEN is pleased to announce that it will present at the SMTA Houston Expo & Tech Forum, scheduled to take place Tuesday, March 1, 2016 at the Stafford Centre in Texas. Dr. Mike Bixenman will present the paper titled “Characterizing Materials at the Component Interface Can Improve Reliability.”
Industry News | 2018-10-18 10:49:25.0
Panelizing PCBs with Tab Routing
Industry News | 2018-10-18 09:25:04.0
Analysis of smt nozzle Material
Industry News | 2017-05-20 15:06:05.0
PCB array panelization can be a major challenge for PCB designers. Learn best practices for designing PCB boards for most efficient panelization.
Vice President of Product Management, Pete Doyon providing a demonstration of Schleunigers UniStrip 2300 and the PowerStrip 9550 MR at WPE
