Industry Directory | Consultant / Service Provider / Manufacturer / Standards Setting / Certification / Training Provider
Blackfox is the industry leader in providing IPC Certifications, Solder Training, Customized Training Programs, and Counterfeit Component Training and Certification.
Industry Directory | Manufacturer
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Form & Cut 2-, 3-, 4-, 5-, and 7-leaded Radial Components Capable of forming loose radial components at rates up to 5,000 parts per hour with a variable speed motor. Feed components by hand or with tubes (TO-220s) Reduce setup time with quick ch
Electronics Forum | Thu Apr 09 17:13:23 EDT 1998 | Ryan J.
Has anybody heard of a shield to shield the cutter from flying leads during hand cutting of through hole components. If it collected the leads also that would be helpful. I am thinking of plexiglass or something that the board could be placed under.
Electronics Forum | Thu Apr 09 18:36:52 EDT 1998 | Steve Gregory
| Has anybody heard of a shield to shield the cutter from | flying leads during hand cutting of through hole components. | If it collected the leads also that would be helpful. | I am thinking of plexiglass or something that the board | could be plac
Used SMT Equipment | SMT Equipment
Product name: YS100 high speed universal module chip mounter Product number: YS100 Products in detail The characteristics of 25000 CPH (equivalent to 0.14 seconds/CHIP: best conditions) ability of high speed SMT All the time, SMT absolute a
Used SMT Equipment | Pick and Place/Feeders
Product number: YS100 Products indetail The
Industry News | 2019-01-09 21:58:38.0
GPD Global will exhibit at IPC APEX EXPO 2019. Stop by Booth 2915 to see live demonstrations of machines and equipment. Experts will be there to discuss your production needs. Whether your project requires a pump for retrofitting or a fully automated dispense system, conformal coating, or component preparation, we have a solution for you.
Industry News | 2017-01-26 19:53:00.0
GPD Global will exhibit in Booth 2933 at the upcoming IPC APEX EXPO 2017 scheduled to take place February14-16, San Diego Convention Center. GPD Global will officially launch its new, fully automated dispense platform, Hyperion, and a new, low cost conformal coating system.
Parts & Supplies | SMT Equipment
Smt component inserter Universal AI Parts 44624204 Universal AI Part Number: N210044355AA PUSHER 104691107205 CHUCK 1087188201 80013805 51119302 51109602 47630915 Centering Insert 47152202 FINGER 46930412 GUIDE JAW 46914201 ACTUATOR 4691
Parts & Supplies | SMT Equipment
Smt component inserter Universal AI Parts 44426606 Universal AI Part Number: N210044355AA PUSHER 104691107205 CHUCK 1087188201 80013805 51119302 51109602 47630915 Centering Insert 47152202 FINGER 46930412 GUIDE JAW 46914201 ACTUATOR 4691
Technical Library | 2023-09-13 11:56:22.0
Discover the ultimate soldering solution with our Automatic Visual Soldering Robot. Achieve flawless, precise soldering for your electronic components. Boost productivity and reduce errors with cutting-edge technology.
Technical Library | 2021-09-02 08:17:07.0
We are a professional manufacturer of PCB depaneling machines, which is workable for all boards, including flex and regid boards, v-scored boards and routed boards. Laser pcb depaneling is non-contact way without mechanical stress,this solution is good for modern precision PCB depaneling. It has below advantages: 1. No dust The production environment of the circuit board industry is carried out in the dust-free workshop. The traditional pcb depaneling equipment, such as blade moving type machine, will inevitably produce residues and micro powder, which will pollute the 10000 and 1000 class dust-free workshops and affect the conductivity of products. The UV laser PCB cutting machine is a vaporization processing process, which will not produce dust and is conducive to the conductivity of the product. 2. High cutting precision The processing gap of high-precision traditional processing equipment can not reach the gap width of less than 100 microns, which will cause certain damage to the lines on the edge or PCBA circuit board containing components. The focus spot of the laser cutting machine is small, and the ultraviolet cold processing mode has little thermal impact on the edge of the circuit board. The cutting position accuracy is less than 50 microns, and the cutting size accuracy is less than 30 microns, which will not affect the edge of the circuit board, and the precision is high. 3. No stress Traditional processing methods generally have V-grooves, which will cause certain damage to the board in the manufacturing process. The UV laser PCB cutting machine can directly cut the bare board without making V-grooves. In addition, the traditional processing methods directly use tools to act on the circuit board, especially the stamping method has a great impact on the circuit board, which is easy to cause board deformation. The laser cutting machine is a non-contact processing mode, which acts on the surface of the material through the high-energy beam, which will not cause the influence of stress and the deformation and damage of the circuit board. 4. For special-shaped cutting, it is easy to automate The UV laser PCB cutting machine can cut for any shape without replacing any props and fixtures, and without steel mesh. The same equipment can meet special-shaped and straight-line cutting, which is easy to realize assembly line automatic production and high flexibility. It is easy to improve production efficiency and save production process and production cycle. In particular, it can quickly and efficiently meet the needs of rapid proofing, directly import the drawing, and then locate the cutting. 5. High compatibility The UV laser PCB cutting machine can process the materials around the circuit board, such as PCB, FPC, covering film, pet, reinforcing board, IC, ultra-thin metal cutting, etc. it has strong practicability, is compatible with the processing of a variety of materials, is easy to operate, can be imported into the drawing, does not need to adjust any mechanical parts, and is easy to operate and maintain. 6. Good cutting edge effect The cutting edge is smooth and neat without burr. It can be processed and formed directly according to the size of the drawing, which is conducive to improving the yield of the product. It can be directly installed into the subsequent process without further processing. For more details about UV laser depaneling, please feel free to contact us. www.pcbdepanelingrouter.com
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabilities Meets exacting military s
Training Courses | | | IPC-A-610 Specialist (CIS) Recert.
The Certified IPC-A-610 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC-A-610 Specialists.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Tue Feb 05 00:00:00 EST 2019 - Thu Feb 07 00:00:00 EST 2019 | Anaheim, California USA
Pacific Design & Manufacturing
Events Calendar | Tue Sep 10 00:00:00 EDT 2019 - Thu Sep 12 00:00:00 EDT 2019 | Novi, Michigan USA
Battery Show
Career Center | Orlando, Florida USA | Production
Position Summary: Build through-hole (THT) and surface mount (SMT) printed circuit board assemblies, placing components on boards per controlled parts lists, drawing documentation and quality workmanship guidelines. Position reports to: Group Lea
Career Center | Santa Clara, California USA | Engineering
Global, multi award winning leader in the CEM industry is expanding their manufacturing into fiber optics. A new position has been created for a Sr. Optics Component Engineer to support the new optics division. In this position, the candidate will be
Career Center | Wayland, Michigan USA | Engineering,Maintenance,Research and Development,Technical Support
-Young, energetic, and eager individual ready and willing to learn new skills and exercise my current skill set. -Trained and proficient in the following pieces of equipment: MyData Pick and Place, Dek screen printers, Cyberoptic and Koh Young SPI,
Career Center | Grand Rapids, Michigan USA | Engineering,Maintenance,Management,Production,Research and Development,Technical Support
""
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/industrial-coating-systems/additional-product-sub-type/plural-component-systems?con=t&page=22
: Plural Component Systems Growing Capacity, Cutting Costs - BTD Manufacturing Case Study Industrial Coating Systems Powder Application Case Study - Progressive Powder Coating, Mentor, OH Industrial
GPD Global | https://www.gpd-global.com/co_website/pdf/lead-former/CF8-User-Guide-801-1-07.pdf
Transport Wheel Hub Transport Wheel Shim Component Ejector Blade Sideplate Assembly Safety Switch Cutting Wheel Pair Stations 2 & 3 Counter Box Note: Items 11 and 13, the sideplate assembly and the cutting wheel pair, are shown in a cutaway. This is done for
