489 conformal tape results

Full Site - : conformal tape (Page 12 of 19)

Conformal Coat Masking Tape

Electronics Forum | Thu May 27 15:59:30 EDT 2010 | mikesewell

ATS-667 tape. You can buy direct http://www.ats24.com/index.cfm?fuseaction=content.display&contentid=50 or through distribution such as All-Spec. Polyester film with rubber resin adhesive (no silicone) = clean mask lines. Call for a sample.

Conformal Coat Masking Tape

Electronics Forum | Sun May 30 09:17:24 EDT 2010 | davef

We use 3M Scotch #42 tape For more look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=57849

Masking Tape

Electronics Forum | Sat Jul 22 03:27:36 EDT 2023 | shrikant_borkar

hi here are consolidated inputs to you you must validate before establishing your process. ESD-safe Material: Ensure that the masking tape is made of ESD-safe materials that have low triboelectric charge generation. Common materials used in ESD-sa

Humiseal HT-500 Masking Tape Replacements

Electronics Forum | Mon Mar 05 22:51:05 EST 2007 | davef

Humiseal * HT500 HumiTape silicone free (Kapton tape isn't) * HT600 HumiTape [ESD safe version] Try: Shercon [10425 Slusher Dr, Santa Fe Springs, CA 90670; 800-228-3218 F800-955-8988 562-946-8555 F562-946-1015 http://www.shercon.com] "Conformal Coa

Conformal Coat Masking

Electronics Forum | Thu Jul 25 10:52:26 EDT 2002 | waynesmith

I've been tasked with increasing the CCA throughput in our Conformal Coating workcenter. My first approach will be to look into a more *automated* approach for the masking process. We currently use a manual method of using masking tape prior to con

Conformal Coating

Electronics Forum | Thu Dec 12 10:42:52 EST 2002 | Adam

Guys Does anyone have any bright ideas with regards to masking a PLCC socket with via holes directly below the socket, prior to conformal coating ? We've tryed kapton tape and peelable masks but not with desirable results. Our coating process is a t

Conathane CE 1155-35 Conformal Coating Issues

Electronics Forum | Mon Sep 26 16:48:32 EDT 2005 | PWH

Are you using masking? Conformal coat will de-wet (no pin holes usually, though) due to masking tape adjacent to affected areas if the tape glue chemistry isn't compatible with the conformal coat.