Electronics Forum | Fri Feb 26 14:05:28 EST 1999 | Dave F
Cunli: Registration keeps "booting" me back to the start of restration, because the very nice program doesn't accept any type of company. Keep it. Dave F | For the Head to show, you have to be a registered individual. Even if you registered your
Electronics Forum | Fri Aug 03 22:20:49 EDT 2001 | jbull
Dave, We archive programs as follows. Step1. Perform a successful first piece article Step2: Copy the Program to a password protects network drive. Step3: Run the program in production, from the local drive Step4: After the production run, delet
Electronics Forum | Wed Feb 04 23:27:38 EST 2004 | dougt
I did some work with 400E's and have can give you a couple things to try with your Y axis problem. 1. There is a file called stepperparms.exe that will load all the stepper parameters on the PCL IC's. Your y axix chip may have corrupt data on it.
Electronics Forum | Wed Feb 25 22:32:39 EST 2009 | exsydeco
the company name is similar to my screen name. you will be smart enough to notice it, it is in forli, italy. machines that i service is Yamaha/Philips. He sells feeders too, but junk feeders that he take for free (thats what he said) from customers
Electronics Forum | Tue Apr 21 12:48:13 EDT 2009 | bk
ok you verified that the motor was bad. So now i would go back and verify that your voltages are still good on the back of the computer box and on the booster board. If they all check out fine. I would take the mot x board from your working machine a
Electronics Forum | Wed May 06 19:06:23 EDT 2009 | swag
We used to run GSM's on our SMT lines but now have new machines. I have all old programs from GSM's zipped and archived on our server. We have new orders for a handful builds that ran on GSM. I might be able to import those old files into our off-
Electronics Forum | Thu Dec 10 16:57:32 EST 2009 | vetteboy86
I'm just getting into temperature profiling our PCB's. We recently bought a new reflow oven. The company purchased a mole before I was hired. This is what I will be using. What is the preferred way to attach the thermocouples to the PCB locations of
Electronics Forum | Wed Jan 05 21:25:15 EST 2011 | jeffr
Error 215 is due to corrupt memory. I suggest that you start by replacing the Lithium battery on the Mother Board. Next, remove the cable from the Floppy unit and turn on the machine with it disconnected. Goto the SYSTEM menu and find the menu "DATA
Electronics Forum | Thu Jan 06 10:49:18 EST 2011 | ercdave1
Thank you guys for the help. Tom, i got the manual and as far as i can tell there is a lot of reading i need to do. Also got the MCH file but i do not have any idea as of how to imput to the machine. i will read the manual hopefully some of my ques
Electronics Forum | Wed Mar 28 09:59:47 EDT 2012 | bradlanger
Sounds like you have tried everything I can think of as far as hardware is concerned. One thing that sounds suspicious to me if the error "Failed to create empty document". I have only seen that error when my MMI software got corrupted in the process