Electronics Forum | Thu Mar 30 07:10:56 EDT 2017 | nickywan
I have a problem with some particle, dust and solder paste contaminate on PCB rack and need to clean up once a week by manual. Now looking for the equipment to do Inline cleaning with water jet & Hot air Dry concept. Not too big machine and concept l
Electronics Forum | Fri Mar 05 19:17:00 EST 2004 | Ken
I have had OSHA strap accumulative "sniffers" onto wave operators and maint. tech's. THe sniffers collect air bound particulates and trap them into a filter. Later the filter is analyzed and an operator exposure rate is determined. They also will la
Electronics Forum | Tue Oct 12 09:52:18 EDT 2010 | dyoungquist
Obviously a totally clean floor is the best. So what if you have 1 particle of dust on your entire production floor? Is that 1 part per million (1 PPM)? or is that 1 part per billion? or 1 part per ???? How do you measure dust and come up with a
Electronics Forum | Mon Mar 03 23:39:04 EST 2008 | gdzuber
There are different options for de-paneling routers. There are two basic types, in-line and stand-alone. Do you need in-line for high volume? The stand-alone systems have manual insertion trays, one or two trays. Also, after de-paneling or laser ma
Electronics Forum | Tue May 25 11:34:02 EDT 2010 | jmedernach
Hi, Use nitrile or latex gloves for handling your product from your pre-coating cleaning step onward. In my opinion, conformal coating should be isolated from the rest of the factory floor. I'm not saying you need a clean room or even a white room.
Electronics Forum | Wed Dec 09 22:40:48 EST 1998 | phillip fhunter
| Hi, I know for sure that by controlling temp. and humidity | conditions in SMT assy lines room, one gets advantage in | screen printing, adhesive dispensing, and pick&place | machines mainteinance. Does any one have any advice on why | else is a c
Electronics Forum | Fri Jun 24 08:47:14 EDT 2005 | grantp
Hi, There are many aspects to consider. 1. Firstly the room needs to be designed so it's sealed, so linoleum floors than curve where the wall meets the floor, so dirt does not get trapped in the corners, and mops get all dirt and pick it up. Floor
Electronics Forum | Wed May 17 11:19:44 EDT 2000 | John Thorup
Hi Dave It sounds like you do pretty much what we do. A couple of points: If your machine allows, open, fill and seal the dross container inside the machine. Otherwise, the auxillary exhaust as you describe is a must. Be gentle in your movements. Don
Electronics Forum | Fri Oct 02 16:49:33 EDT 1998 | Dave F
Benji: I tend to agree with you that assemblers shouldn't wear make-up. I'm unsure what first level assemblers are tho. I've been down that finger cot/glove route ... 1 If someone is going to smear facial or cosmetic oil on a board, they can do
