Electronics Forum | Wed May 13 17:46:09 EDT 2009 | cusackmusic
Does anybody have any recommended Clinch/Length values for: 1/4W Resistor 1N4007 Diodes 3W Resitors (A bit bigger than 1N4007 leads). Thanks, Jon
Electronics Forum | Fri May 15 22:06:10 EDT 2009 | jrr3434
I use a clinch of 5 and a length of 3 for 1/4w and thicker leg diodes probably a 7 and 5. You really just have to play with the machine it figure out what works best for your application.
Electronics Forum | Tue Feb 23 12:49:10 EST 2010 | gregp
Dilbert is correct. The CS-400E machine is the machine of choice. The component insertions are light guided, the components are automatically presented to the operator and the leads are automatically cut and clinched at programmable lead length and
Electronics Forum | Mon Oct 26 16:01:33 EST 1998 | tom Gervascio
| | I need some info on how to stop the bridges I'm having on | | radial and axial parts that are in the same place on every board. I'm also having problems with sot-25 bridging. I'm using a Electrovert E-pak. I tried leveling the machine,solder pot
Electronics Forum | Mon Jul 23 10:09:32 EDT 2007 | slthomas
(1) part standoff - how far the base of the part rests from the top of the board. Seating plane will rest flush with the board, whether it's the bottom of the part or a lead form. (2) lead length - is the final length of the lead adjustable, so t
Electronics Forum | Thu May 10 21:45:41 EDT 2007 | davef
Comments are: * Mass lead trimming equipment suppliers are: ** Q Corp; 301 River St, Derby, KS 67037; 800-835-1099 316-788-3746 F316-788-7428 qcorporation.com qcorp@qcorporation.com ** Microscan [LT1821 Lead Trimmer]; ?? ** Roto-Form; PO Box 118; Si
Electronics Forum | Fri Jul 29 13:30:43 EDT 2016 | gregp
Versatec specializes in the remanufacture of Contact Systems machines, most notably the CS-400E component locator with programmable cut and clinch. these machines are field proven over the past two decades and provide many benefits when utilized: 1.
Electronics Forum | Fri Oct 23 16:19:14 EDT 1998 | Dave f
| I have been requested to explore the possibilities of using an inline lead trimmer in our manufacturing process. I have a few questions I need answered. | 1. Can anyone recommend a good model of trimmer for in-line use? | 2. We do double sided SMT,
Electronics Forum | Sun Feb 06 07:49:16 EST 2000 | Dave F
Casimir: A comment and a couple questions: * Have you considered a machine that forms component leads to "self-clinch?" With this forming components snap into hole in the boards with the proper finished lead length and requires not trimming after
Electronics Forum | Tue Feb 19 14:02:56 EST 2008 | scooter
I have done this in a past life. In my mind this is a step backwards. If all of your parts are placed by hand it will work.You will need to cut at the top of the solder to keep the leads form bending If any parts are auto inserted you will need to c
