New Equipment | Solder Materials
As the world's leading developer of advanced solder paste materials, Henkel delivers decades of technology and expertise for optimized process performance. With ground breaking new formulations to provide an easy transition to lead-free as well as pr
.jpg)
New Equipment | Solder Materials
LOCTITE GC 10 is a halogen free, zero halogens added, no-clean, low voiding, Pb-free solder paste specially formulated to provide added long term stability over a wide range of temperature conditions. The enhanced paste stability created through its
Industry News | 2018-10-18 08:55:30.0
Nitrogen Protection Reflow Oven
Industry News | 2015-04-10 15:53:44.0
Blue Thunder Technologies will offer LOCTITE GC 10, named "The Game Changer"
Technical Library | 2013-10-24 15:47:53.0
Reflow soldering in a nitrogen atmosphere is a common process consideration in surface mount technology assembly. This is because the use of nitrogen in reflow equipment may benefit the process as well as the quality of the end product, where it can increase the reliability of the solder joint. (...) The present study investigated thoroughly the effect of different reflow soldering atmosphere, which is air and nitrogen on IMC formation and growth
Technical Library | 2021-10-20 18:21:06.0
The solderability of the SAC305 alloy in contact with printed circuit boards (PCB) having different surface finishes was examined using the wetting balance method. The study was performed at a temperature of 260 _C on three types of PCBs covered with (1) hot air solder leveling (HASL LF), (2) electroless nickel immersion gold (ENIG), and (3) organic surface protectant (OSP), organic finish, all on Cu substrates and two types of fluxes (EF2202 and RF800). The results showed that the PCB substrate surface finish has a strong effect on the value of both the wetting time t0 and the contact angle h. The shortest wetting time was noted for the OSP finish (t0 = 0.6 s with EF2202 flux and t0 = 0.98 s with RF800 flux), while the ENIG finish showed the longest wetting time (t0 = 1.36 s with EF2202 flux and t0 = 1.55 s with RF800 flux). The h values calculated from the wetting balance tests were as follows: the lowest h of 45_ was formed on HASL LF (EF2202 flux), the highest h of 63_ was noted on the OSP finish, while on the ENIG finish, it was 58_ (EF2202 flux). After the solderability tests, the interface characterization of cross-sectional samples was performed by means of scanning electron microscopy coupled with energy dispersive spectroscopy.
Baja Bid | https://bajabid.com/product/2012-on-site-n-250-tgn-nitrogen-generator/
2012 On Site N-250-TGN Nitrogen Generator - Baja Bid LLC Skip to content Your EMS Asset Management Partner Careers | Current Auctions Linkedin page opens in new window Baja Bid LLC Your EMS Asset Management Partner Home About Services Managed Online Auctions Asset Analysis Consignment Program Cash Buyout Program
Lewis & Clark | https://www.lewis-clark.com/product/on-site-gas-systems-inc-n35-tgn-nitrogen-generator/
On Site Gas Systems Inc. N35-TGN Nitrogen Generator - Lewis and Clark Skip to content My Cart: $ 0.00 0 View Cart Checkout No products in the cart. Subtotal
