Electronics Forum | Tue Mar 05 07:12:25 EST 2013 | bobpan
I can send you all of those files. You will also need DOS. Go to my website www.precision-repairs.com and e-mail me. I will get the files to you as soon as I can. Thanks, Bob
Electronics Forum | Mon Mar 11 13:36:28 EDT 2013 | babe7362000
To get rid of the old info as far as the electrical test and so forth, just try to type in the pick number in CC, it should erase that extra info that you do not need. Do this after you uploaded your information. Hope this helps.
Electronics Forum | Mon Mar 11 13:46:14 EDT 2013 | ngineer
Michelle, I've tried this, and the extra information goes away, until you save and then access the pick and place data again, then it is back.
Electronics Forum | Tue Mar 12 22:30:58 EDT 2013 | ngineer
i can only see the issue after it's uploaded to the central controller. if the sequence is edited on the HHT, from V T Pick 9 to PICK 9, it stays that way until i download to CC and go to view it.
Electronics Forum | Mon Jun 10 08:13:48 EDT 2013 | bobpan
Check to make sure the side covers are closed. It is probably an interlock problem. Also if you have carts...make sure the plunger switches are down. Good Luck
Electronics Forum | Fri Jun 28 09:56:25 EDT 2013 | island2013
Hi Rollon, Did you get your Quad up and running? We have an MVS board and many other quad parts. Let us know if we can help.
Electronics Forum | Mon Jun 17 06:56:50 EDT 2013 | bobpan
Did you teach the reject mark? Sounds like a lighting issue when looking for the white sticker. You can also skip images by pressing control-repeat after the machine has found fiducials. Good luck
Electronics Forum | Mon Jul 22 05:03:45 EDT 2013 | bobpan
That documentation was written 20 years ago and was meant to be a reference for the software. To use autoprogram...engineers would take a 3-5 day class. It simply was not supposed to be learned from a manual.
Electronics Forum | Thu Sep 12 20:55:39 EDT 2013 | marcelorotofrance
My own unit has an internal transformer also. It has multiple secondaries, and a divided primary which can be configured to the required voltage by changing jumpers. Best regards.
Electronics Forum | Thu Aug 29 05:01:38 EDT 2013 | bobpan
Motor Error 5 is usually an interlock error. Take off the rear right cover and look at the red and green led's on the driver cards. If they are both lit....you have a door open or if you have carts....a feeder base switch is up. Good Luck
