Electronics Forum | Mon Aug 06 11:58:48 EDT 2007 | gmoritz
Do you have BEC (Board Error Correction) > on that machine, and if so, did they > give you the alignment plate for it? I don't know if we have BEC on the machine. I can't even search the 550 page manual that was finally sent to us in a pdf file
Electronics Forum | Fri Jan 29 18:52:53 EST 2010 | cusackmusic
We bought an Ersa Hotflow 5 used a few years ago as a backup. Well, we needed a backup a few days ago, and it didn't back us up. When I turned it on, the screen on the machine is blank, and two buttons with an up and down arrow seem to turn on two
Electronics Forum | Tue May 17 13:10:50 EDT 2016 | rx8pilot
Thank you Bobpan - I tried that sequence but instead of LED's flashing - they were solid and it remains in 4mm mode. After looking closer at the feeders, it appears there are 'SlimPRO' and 'ThinPRO' versions. The ThinPRO version is what PPM manufactu
Electronics Forum | Thu Sep 22 13:05:29 EDT 2016 | chabscan
Hi I would like to know the process in wich the Quad 4C knows it has the correct component after taking it from the feeder. Recently I've been put in charge of a Quad 4C machine that is used to assemble two different boards. Each one has already a
Electronics Forum | Tue Apr 23 06:26:18 EDT 2019 | jfeustel
Kanetic did implement a feature into their PLC code that would allow for simple reversal of the board flow. This is why the conveyor suddenly reversed direction after so many years. Because the feature was invoked by holding down a button it was kno
Electronics Forum | Fri Dec 18 22:20:41 EST 1998 | phillip hunter
| I have developing a BGA Process and having problems with | 310 IO PBGA reflowing. I am achieving good wetting exept | 2 to 5 balls on the outer perimeter I have a good profile | my air flow is set per mfg spec, the stange thing is that | it doe
Electronics Forum | Sun Dec 20 20:40:22 EST 1998 | Miguel Mariscal
I would love to send a copy of my profile thanks, our machine is also a Summit 2000. | | I have developing a BGA Process and having problems with | | 310 IO PBGA reflowing. I am achieving good wetting exept | | 2 to 5 balls on the outer perimeter
Electronics Forum | Wed Nov 16 14:44:31 EST 2011 | olddog
Bobpan, thank you for your speedy response. As to the items you noted: 1. I did a test of Funct 30 for the first 5 nozzles, 2 times each as follows: noz1 Ht=215 & 219, center=1005 (all nozzles all tests), run out 2.2 & 2.7. Noz2 Ht=228 &228, runout=
Electronics Forum | Thu Oct 18 15:03:48 EDT 2012 | rway
2) Start with the PLC. What do the indicator lights tell you. Is your entry sensor working? Your PLC has status lights that should go on/off with the input/output conveyors. Can you be more specific about "not operational?" This is a broad stat
Career Center | , India | Production
Reads instructions, such as work orders, drawing, and wire lists to determine materials needed and sequence of assembly, Manual Hand tool using for Wire cutting, stripping, crimping. Soldering, Splicing, Assembling PCB Boards, Boot Shrinking, Heat