Electronics Forum | Mon Oct 07 17:03:20 EDT 2019 | dwl
Personally I hold the opposite opinion on the Juki post. To me it felt like a blatant marketing attempt. A better way would have been for Juki to publish a white paper or pay for advertising. Its one thing for a company to respond to someone else's q
Electronics Forum | Thu Oct 10 03:18:28 EDT 2019 | bukas
Hey guys, my DEK265 GSX is acting funny. It misprints half of the boards. The one half when squeegees move away from operator to be precise. When squeegees are moving towards operator print is perfect. In both cases actuators are moving prior to prin
Electronics Forum | Fri Oct 11 03:06:00 EDT 2019 | bukas
Hello Dekhead, it is a constant offset, like 0.5 mm to right when machine prints away from operator. When print goes towards the operator there is no offset. I swapped X5 and X6 cards with spares I got but still same result . I set the program to hav
Electronics Forum | Thu Nov 14 12:55:03 EST 2019 | SMTA-Tony
Very late but here's my 2 cents. Will require a custom fixture for every flex or semi-rigid flex. Depending on panel thickness; use 2 tooling hole to fixture on one axis, other tooling holes will have pullers to ensure proper placement. Even with the
Electronics Forum | Fri Nov 15 11:03:48 EST 2019 | rgduval
I think Steve is on to it. The wire is not getting hot enough to wet. Either the solderer is attempting to solder too quickly, or the PTH is connected to a ground plane. The solder sticking up through the hole leads me to think it's connected to a
Electronics Forum | Tue Dec 03 09:54:20 EST 2019 | davef
CURIOUS MINDS WANT TO KNOW Which processes are "front end" and which are "back end"? Why are they separated like that? Why are "front end" and "back end" processes usually done in separate plants? What are the high-value activities? Which activi
Electronics Forum | Tue Dec 03 05:25:02 EST 2019 | paulanderson
We have purchased a Mydata MY9 from the US to use here in the UK. Does any know the how to convert the power configuration plugs? I have a L-029-0296 fitted but believe I need a L-029-0295 for the UK, it appears to be just a set of links but I do kno
Electronics Forum | Mon Dec 16 13:03:00 EST 2019 | SMTA-Norah
Passives are at least fairly simple, generally either they solder or they don't, testing with paste stenciled on to glass slides is one variation and a hot solder dip is another. The glass slide is nice because it's closer to the end use scenario.
Electronics Forum | Tue Dec 24 03:51:35 EST 2019 | richardcargill
There's a place for both methods, but the advancements made year on year in 3D printing technology and quality give it the edge I reckon. We use 3D printing a lot and do it 'in house'. There's very little waste compared to machining a part from a bl
Electronics Forum | Mon Jan 20 03:50:37 EST 2020 | falconex_technician
Hi, my company bough second hand pick and place as our second machine. After first transport after start just when initializing, It's showing problem with Z calibration. After second position setup and connect again after month, now showing &