Electronics Forum | Thu May 19 02:04:36 EDT 2016 | jpcwg
Located in Shenzhen China, the Silicon Valley of hardware, ALLPCB.com is a company specialized and experienced in manufacturing printed circuit boards of prototyping and low volume production. Through the years thousands of business customers and eve
Electronics Forum | Fri May 06 08:27:38 EDT 2016 | kahrpr
We have Samsung and havehad no problems with simultaneous pick ups with 201s 0r 402s. the feeders are durable and do not need much repair especially the sm feeders. The SME feeders have not been out as long so we will see so far so good. As with all
Electronics Forum | Thu May 12 00:18:55 EDT 2016 | darby
Sorry for delay - been flat out. Sr - I understand what you are saying. My concern is that combined with the head offsets and variations in pick points (i.e. having to teach feeder positions for very slight amounts like 0.05mm)then you cycle times wi
Electronics Forum | Wed Oct 10 10:35:43 EDT 2007 | cyber_wolf
We are using the tapered nozzles.
Electronics Forum | Fri Aug 26 16:28:27 EDT 2011 | fredc
I have a copy of the Juki catalog "e" and it shows the 750 capable of 0201s but not the 760. We have several customers that get 149s from us to place 0201s. We have also made a custom 101 with one small hole for several machines that would not re
Electronics Forum | Wed Oct 10 08:13:03 EDT 2007 | cyber_wolf
Hi, What is the expected reject rate for capacitors on a CP643 machine. I estimate that we are dumping around 1 in 20 on average. I have played around with lighting levels,vision types etc. Nozzles are in mint condition. Can anyone offer any advice
Electronics Forum | Thu Oct 11 06:36:57 EDT 2007 | cyber_wolf
Feeder is brand new. (Checked cal. even though it was new) Lighting is good. Machine is in perfect cal. Nozzles are brand spankin new from Fuji. I was able to lower the reject rate considerably by playing with the offset and gain. I am placing caps
Electronics Forum | Wed Oct 10 11:20:31 EDT 2007 | jdengler
Do all 0201's reject at the same rate? If even 1 P/N has a lower reject rate this can point towards a feeder problem. I have had a similar problem on a CP-IV-2 with 0402's that was caused by feeders. If all reject at the same rate it can be the PD o
Electronics Forum | Wed Jun 24 08:28:16 EDT 2020 | pickplace
Hi Jacobo, it would be importatn to know what kind of error the machine is displaying. Are the chips in paper or plasic tape? Did you check pickup coordinates and hight? Have you many false edge pick vision errors? Then I would switch off the tombest
Electronics Forum | Fri Feb 08 18:35:20 EST 2013 | johnniek
We currently use Assembleon Gem series pick and place machines. We have no problems using them other than they are not intended to run 0201 or 01005 components. We are looking to buy another machine to add to our lines that would be capable of doing