Electronics Forum | Mon Jan 14 08:56:30 EST 2008 | geb
Hi, The machine is a Universal GSM1 flexhead. Is it possible to just change the lens of a 2.6mil camera for a 1mil or 0.5mil lens. Or do I have to buy a complete camera assembly to do this? Thanks, Grant
Electronics Forum | Mon Jan 14 10:35:27 EST 2008 | swag
GEB - We have a 1.0 mil camera for GSM1 that we do not use. We would prefer to have a 2.6 mil on our machine. Are you interested in a trade?
Electronics Forum | Mon Jan 14 10:51:23 EST 2008 | geb
Interesting... where are you based? I am in the UK. What types of components benefit from having a 2.6mil over a 1mil?
Electronics Forum | Mon Jan 14 18:19:35 EST 2008 | geb
Thanks for the info. I use the machine with a 1mil for resistors and capacitors and the machine with the 2.6mil for ICs (both have a 4mil.) This is because the r's & c's seem to benefit from the 1mil, more than IC's. I was thinking of making the mach
Electronics Forum | Mon Jan 14 19:07:29 EST 2008 | swag
Your IC's should run great. I have changed out a handful of cameras inside the box (you know when your camera is burning out because the monitor will show black/gray horizontal lines). It's pretty easy. Aftermarket cameras are about $350 I believe
Electronics Forum | Mon Mar 01 11:03:22 EST 1999 | Dennis Xiong
Hello! SMT professionals, I do not know if anyone posted this question before. Last week, I reflowed our newly designed thin Rigid-Flex pcb with 0.040" thickness. I found all of pins of a TQFP48 ic did not get wetted. I could see on the heel side o
Electronics Forum | Mon Jan 14 12:28:06 EST 2008 | swag
We are in North Western U.S. I like 2.6 better (for our mix of builds, anyway). 1.0 works great on PTF parts such as fine pitch QFP's but I don't like it for chips. It's too picky and we wind up forcing parts to the 4.0. We have another GSM dual
Electronics Forum | Mon Jan 14 17:36:29 EST 2008 | flipit
SWAG is right on the money. I had a 0.5 mil per pixel camera and a 1 mil per pixel camera. As you increase magnification your focal range goes down. So your part height becomes much more critical. Parts out of focus will be rejected to the dump b
| 1 |
