Electronics Forum | Mon Jul 16 09:15:57 EDT 2018 | bukas
problem was solved by cleaning lid bolt connector on chassis... both lid bolt and chase clamps are controlled by SCB34 card, it seams that there is an issue with poor connection on lid bolt triggering this bug. I assume its bug because other card beh
Electronics Forum | Mon Jan 06 14:02:00 EST 2020 | dman97
Have you tried to open the MINT program and re download the drivers to the cards? Sometimes the cards fail because the battery does not hold sufficient charge to keep the files intact.
Electronics Forum | Fri Feb 10 12:21:20 EST 2023 | youngbuck
Also, tried swapping the Servo card. X7 which is the Rising table servo motor card, swapped with X8,9,10 which are all the same and same result.
Electronics Forum | Fri Sep 26 08:11:15 EDT 2008 | dwelch123
Try swapping cards in Y1 enclosure. You can swap zero and one or two and three but make sure you change the shunt position and the dip switch settings and see if your problem switches cards. The lithium battery likes to fail on those cards. Reload th
Electronics Forum | Mon Jan 06 16:19:32 EST 2020 | richardcargill
haven't tried the MINT as it won't let me get that far !! Swapping the Eproms with card 1 and changing the identifier will let it get to the 'Press SYSTEM key' part of the startup though, then it fails on card 1 instead of 0 so I'll give that a try i
Electronics Forum | Mon Feb 02 13:46:33 EST 2004 | kauer
I'm back. By chance do You have another DEK You can swap cards with to help isolate the problem?
Electronics Forum | Mon Feb 02 15:09:09 EST 2004 | jsk
I don't have another dek to swap cards with and i'll keep you informed on the problem. It's running fine now but I don't think it will make it through the day. Thanks for the help.
Electronics Forum | Wed Sep 12 08:58:41 EDT 2007 | aj
do you have another dek machine in the factory ? if you do start swapping out cards that are related to the vision aj...
Electronics Forum | Sun Jul 06 16:10:10 EDT 2008 | smellew
Hi AJ, have you tried Adamtech he deals only with DEKs and maybe best person to help you if Scobie can't. Llew
Electronics Forum | Thu Apr 18 15:33:37 EDT 2013 | empac
Hello, Does anyone know how to fix the following problem on a DEK265GSX? Motor comms failure card1 AX123 Fatal error re-initialize machine. Appreciate your help! Bob
