Electronics Forum | Tue Oct 23 09:09:27 EDT 2001 | Cemal Basaran
What is the reflow temperature you use to attach this package to your PCB.? I did extensive study on this package and compared it with other packages. I used our own Moire Interferometry, SEM, EDX studies. In my opinion the problem is TI does not man
Electronics Forum | Wed Jun 22 09:12:57 EDT 2005 | bsudak
Our manufacturing site has been struggling with soldering Alloy 42 TSOPs. Currently, we have to hand solder in one of our applications. Here are the particulars. Component: 54 leads, Sn plated, 400microinches +/-200. Process: Eutectic 63/37 Sn/Pb
Electronics Forum | Wed Apr 21 18:24:13 EDT 2004 | pjohnson@volterra.com
Simple process - we use similar Kester solder brands of "no clean" low residue solder wick to clean our pads, then brush with isopropyl, and apply Kesters brand of tacky flux under a Leica 6x microscope. We do this on 7x7mm and 9x9mm packages. This w
Electronics Forum | Fri Feb 23 09:35:36 EST 2024 | emanuel
We have the standard profile as a template made according to the solder paste specs. For some boards we measure the result at 2 points, on the board itself and on top of a sensitive SOT263 module and adjust accordingly. The solder paste is well kept,
Electronics Forum | Fri Jul 24 13:41:05 EDT 1998 | Bob Willis
Sorry guys have a look at this list of component weights and then work out the surface area of the lead/pad and then come back on the PLCC issue. Chip 0805���� 0.007g������ 2 Chip 1206���� 0.009g���� 2 Chip 1210���� 0.012g���� 2 SOT23���������0.008g�
1 |