Electronics Forum | Tue Aug 30 23:16:33 EDT 2005 | sumxp
Anyone come across pcb fab.house in Asia who is capable of doing 5mils track with 5% tol and 50 ohms impedence?
Electronics Forum | Wed Apr 09 19:58:40 EDT 2008 | diesel_1t
conveyor speed: 30 in/min. 8 zones stencil thickness 6 mil for most, for the one with 0402 5 mil (due to a 20mil pitch QFP) laser cut. thanks.
Electronics Forum | Mon Apr 07 11:39:55 EDT 2003 | russ
How thick is your stencil? We print 16mil every day with type 3 paste 2 of which you have tried (Alpha and Kester) Stencil should be 5 mil. Russ
Electronics Forum | Fri Nov 17 16:33:10 EST 2000 | Michael Parker
20X magnification, using 0.5 mil accuracy, is helpful. I have a MicroVU system for geometric measurements in my Receiving Inspection, which is used to also measure the new stencils to ensure aperture reductions requested are actually provided by the
Electronics Forum | Fri Mar 17 03:41:33 EST 2000 | JackT
Hi folks, Is anybody have an experience in stencil design for CCGA ? Currently, I'm running with 5 mils thickness stencil and I encountered that there were defect on contact after reflow soldering process. Appreciate your help ! thx..Jack
Electronics Forum | Sun Nov 22 05:41:55 EST 1998 | Daniel
Does any body know stencil manufacturer in states or south east asia for electroforming processes and step down from 5mil to 3mil. Thanks!
Electronics Forum | Sun Nov 22 17:54:08 EST 1998 | Larry Johnson
| Does any body know stencil manufacturer in states or south east asia for electroforming processes and step down from 5mil to 3mil. | | Thanks! | Any screen shop should be able to handle that task. It is failry common these days.
Electronics Forum | Tue Dec 01 05:21:16 EST 1998 | S.R.
| Does any body know stencil manufacturer in states or south east asia for electroforming processes and step down from 5mil to 3mil. | | Thanks! | Hello Look in web site www.suron.com maybe it can help you.
Electronics Forum | Thu Sep 12 01:49:28 EDT 2002 | ck
Hi all, Any stencil opening recommendation for 20mils pitch mirco BGA. Currently, using 12mils round opening, 5 mils thickness. Seen to have weak joints as it crack after Ict testing. thks
Electronics Forum | Sat Oct 12 05:05:09 EDT 2002 | Kenture
I run 0201 on a 5 mils stencil with openting of 15X12 and did not have any issue. The major concern is the placement and CP643 did very good job. Type 3 solder pastes was used. Good luck.