Electronics Forum | Tue Sep 15 14:11:59 EDT 2015 | jpal
You should also remove all the pump parts and clean them, checking the bearings and seals. Clean completely the parts that allow the solder to flow back into the pot; ours have a spiral that fills with dross. Treat yourself to new nozzles. Tinning
Electronics Forum | Fri Sep 18 13:11:38 EDT 2015 | dyoungquist
We used to run a TP9-2 but upgraded to the MY series about 5 years ago..... Encoder going bad is a likely possibility, especially on a machine that old. I can't say for sure that is your problem but we did have to replace an encoder on our TP9 (I
Electronics Forum | Sat Sep 26 14:54:52 EDT 2015 | ercdave1
Hello, just a quick update on this issue. I disabled head 2 on beam 2 which was the second head I worked on, and left only active the head that I had work with first and ran dry cycle with. after disabling the head 2, the machine zeroed with no pr
Electronics Forum | Wed Sep 30 08:29:15 EDT 2015 | johanbergstrom
The difference between TMC Flex and TMD Flex is about the ability to feed component tape with deep pockets for larger components. The TMC have a rather low passage for embossed component tape. While TMC Flex is limited to a maximum tape depth of 7,5
Electronics Forum | Sat Oct 10 11:24:50 EDT 2015 | cusackmusic
I've been running Quads for over 10 years, and I love them. I've had almost every model, from the 100, to our current IVCs, and QSP2. We are getting busier, and I'm thinking about upgrading. I have TONS of feeders, so the simple solution would be t
Electronics Forum | Fri Jan 08 03:56:38 EST 2016 | a290668789
there is no best company just the company best for you. E.g. I use PCBgogo(www.pcbgogo.com/b), they make PCB and also do PCBA, but they don't buy components for me. I don't like this at first and I prefer turn-key service, but why I still choose them
Electronics Forum | Tue Nov 10 15:25:37 EST 2015 | 31258
Good morning RedChili, This is Marvin from Saki America. I came across your post and I noticed that you are interested on 3D-AOI and 2D-AOI machines. We can offer pre-reflow and post-reflow full 3D-AOI and 2D-AOI for you needs. IF you have any ques
Electronics Forum | Thu Aug 25 23:10:55 EDT 2016 | kib45128
MT professional foundries: SMT, DIP, assembly, testing, packaging and "professional OEM services SMT processing, SMT placement, SMT proofing, SMT pilot, DIP semi-finished products, OEM / Sample proofing, the whole process of professional Sample trial
Electronics Forum | Wed Jan 03 02:23:05 EST 2018 | michelle01
We now offer free expedite for PCB prototype. > Min $5 for Standard 1-2 layers board > with 24-48H lead time Min $34.78 for > Standard 4 layers board with 48-72H lead > time. We think it should be very helpful for > your projec
Electronics Forum | Fri Dec 11 16:16:42 EST 2015 | fuji_user_2014
I have an Conceptronics HVA102 that is displaying all "0s" in all zones. I tried a new mobo and power supply and it worked for a short time. However, after restart, the problem came back. I also tried reseating and cleaning all connectors and cards.