Electronics Forum | Sun Oct 21 22:05:01 EDT 2018 | srini1904
Hello, We have Dek 248 Icon i2 semi auto screen printer. This machine was not in use for long time and Bios battery was dead. We replaced Bios battery and now date are correct. Issue is its not communicating to control board. Suspecting Bios setti
Electronics Forum | Tue Jun 05 16:12:51 EDT 2012 | kahrpr
We use both The pin placement works fine for the mpm. If its a dense board you have to to some double checking on the initial set up. On the dek we use Grid lock. For us its toss up which is better they both work.
Electronics Forum | Mon Mar 03 10:19:57 EST 2003 | jseagle
We just got Red-E-Set from Production Solutions for our DEK ELA printer. It is a similar concept, it's mechanical instead of hydralic or pnumatic. The print results are very good and the operators love how easy they are to setup. I am planning on
Electronics Forum | Wed Jan 11 06:29:47 EST 2012 | cbeneat
We have Vectorguard frames we've been using for about 6-8 months. We've seen no leakage on ours. The frame has written on it an operating pressure of 101.5-116.0 psi,our pressure is set a lot lower, 50-60 psi, as we also use another frame that can'
Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris
If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24
Electronics Forum | Thu Jun 04 22:47:58 EDT 1998 | Dave F
| My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My
Electronics Forum | Mon Feb 01 15:18:58 EST 1999 | doug clement
| | My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do.
Electronics Forum | Fri Feb 09 01:46:55 EST 2024 | erikfriesen
I have a 2005 DEK Horizon 02i, the cmos batt was dead, so I replaced, and reset the bios. The device hangs in initialization, eventually erroring out. The vision led's blink rapidly during this period. Also, the card shows an error in device manag
1 |