Electronics Forum | Thu Jul 17 17:36:28 EDT 2014 | proy
Hi, > > If you can not rely on your programmer and > the tools he uses then "double checking" can save > you only materials but in time you really do not > save often extend meaning. There are things you > can identify before the stove, but if
Electronics Forum | Wed May 24 17:49:51 EDT 2000 | Keith Luke
SMTneters, The end of May finds several recent publications from leading publishers on my desk. I am all too happy to share these books with our loyal SMTneters in the hopes that they will provide us with a timely review of the new release. For ma
Electronics Forum | Fri Dec 08 19:08:52 EST 2000 | Mike Konrad
I do not know which specific flux you are using, but here are some general guidelines. If your wave soldering machine uses a foam fluxer, then there are foaming agents in the flux. Under �normal� conditions, the volatiles (including the foaming age
Electronics Forum | Fri Oct 23 04:16:16 EDT 1998 | Tony B
| | My company is looking for higher density for card layout. One suggestion has been locating active components packaged in SOT's and SOIC's on the B-side of the card. This in turn will require wave soldering of the above mentioned components. When
Electronics Forum | Wed Aug 24 08:43:45 EDT 2005 | PWH
What kind of problems/defects/process indicators are you having? It is likely that you will have to bite the bullet and get a thermal profiling mole to prove that your selected profiles are subjecting parts to the correct tempertures per part specs.
Electronics Forum | Wed Dec 09 21:45:11 EST 1998 | Dave F
Graham: I agree. Very thorny. What is clean?? And how is that controlled?? Back 25 or so years ago, soldering was done with high solids rosin fluxes. The issue with cleanliness was ionic contamination. The US military and others set a fairly a
Electronics Forum | Fri May 20 03:41:04 EDT 2016 | jpcwg
With power components coming in smaller and smaller surface mount packages it is very important to come up with a coherent approach to mitigating the thermal dissipation requirements of these components in a PCB design. While the development of an ex
Electronics Forum | Thu Sep 10 21:48:37 EDT 1998 | Dave F
| I'm very familiar with the great board space savings of BGA and all the "claims to fame." However, can someone out there tell me if any concern exist in the inspection realm. Additionally, solder cracking, CTE/TCE mismatches, no leads for stress re
Electronics Forum | Thu Jan 04 08:33:08 EST 2007 | davef
You cannot determine foil thickness from its weight per area, because of the significant variation in the density of electrodeposited [ED] copper. But people don't care. They do it regardless. (oz/ft2)||(mils)||(mm) 1/2||0.7||17.8 1||1.4||35.6 2||2
Electronics Forum | Mon Apr 03 23:17:51 EDT 2000 | Brian G
We have been experiencing intermittent problems with the solder masking bubbling up from the bottom side of the board, after wave soldering. Our board fabricator claims that none of his other customers are experiencing this problem, and that it is pr