Electronics Forum | Thu Jul 04 10:37:22 EDT 2019 | spoiltforchoice
Keep some empty tape and splice a long enough piece onto the foot of the tape to keep the strip and the reel connected.(Brass shim type splice being the most reliable) Or Print 3.5mm labels (Brother PTouch make one this size) and stick those onto y
Electronics Forum | Thu Feb 17 16:25:20 EST 2022 | mihai_voivod
I'm not understanding what roller with closed sides you are referring to. My edge roller bearing (brass color) has a lip on the side. The middle roller bearings (silver) have a slightly bigger lip. These are the roller bearing shown on the manufact
Electronics Forum | Tue Feb 14 13:16:49 EST 2006 | Carol Stirling
CRITICAL DILEMA! Has anyone run into the problem described below and if so, what was the fix (besides not dealing with this Supplier)? Also, we do not have component manufacturing process experience. We are purchasing a surge resistor that function
Electronics Forum | Fri Jul 13 17:16:49 EDT 2007 | jmelson
I just got a used Philips CSM84 pick and place machine for $1500. I had to widen a doorway and rent a forklift to get it inside, as well as have it shipped. So, the total cost was much higher, but still under $10 K. I may have gotten lucky on this
| 1 |
