Electronics Forum | Sun Jul 26 07:52:35 EDT 2020 | sync40
Hello to everyone, Have you ever experienced soldermask bubbles inmediately after printed the soldermask itself? (for screen printing method of LPISM). I am not talking here about blistering or any outgassing defects after exposing to high temperatu
Electronics Forum | Mon Mar 13 21:21:40 EDT 2023 | joeljacobo
Hello colleagues, I appeal to your expertise in this matter that has taken me by surprise. A week ago it was decided to change the solder brand for the wave machine, (only the brand, the alloy is the same). The pot was emptied and filled with the
Electronics Forum | Fri Mar 04 10:45:43 EST 2011 | dennisfo
I'll try to get some pictures using the Ersa scope this afternoon. Not sure how to post them,may try to send directly to you.I'll take some immediately after coating then of the same after a flash off period.
Electronics Forum | Tue Jan 24 10:24:18 EST 2006 | kmorris
We've got a problem here, where we're hand spraying a urethane conformal coat on over a rectangular inductor. The inductor body is a plastic tube, with potting to fill. The top is not always flat (sometimes concave). The problem is that bubbles appea
Electronics Forum | Mon Jul 04 01:30:24 EDT 2011 | rickysanchez
we encounter bubbles on silicone coating after oven curing.what to do to avoid bubbles?
Electronics Forum | Mon Jul 04 20:10:05 EDT 2011 | rickysanchez
1.The bubbles appear only after the oven curing.before curing no bubbles encounterred. 2.The bubbles were very small, and can be found around the die in between the die and the epoxy. 3.Curing time is 150 degC for 4 hours.
Electronics Forum | Thu Sep 20 03:31:42 EDT 2018 | minhhaioh34
Hi all, I need some pro help me with issue bubbles after coating. some information for some pro: Machine: Asymtek Chemical: Achime AVR80 Oven: IA 4 zoon4 ( setting 100 100 90 80 conveyor speed: 0.6 m/min). I had happened before and after the oven. W
Electronics Forum | Fri Sep 21 17:33:01 EDT 2018 | michaelszuch
Hello Hai, The first step is to determine where in the process the bubbles are being generated - either during coating or during curing. You can easily check this by letting a few boards air dry (no oven) and comparing them to the oven-cured ones. I
Electronics Forum | Wed Apr 08 07:49:25 EDT 2009 | davef
We don't view this as "board delamination." It looks more like "solder mask bubbling." It may be the picture. Please describe the issue or enclude additional pictures.
Electronics Forum | Sat Sep 22 10:07:28 EDT 2018 | davef
This chart is from http://www.nordson.com/-/media/Files/Nordson/asymtek/Papers/Process%20Control%20and%20Traceability%20in%20Automated%20Conformal%20Coating.pdf?la=en
