Electronics Forum | Wed May 15 15:58:11 EDT 2013 | rgduval
Let me see if I understand you correctly. You have a batch washer (looks like a dishwasher). There is a top and bottom spray fixture, which would normally spray water up at the board and down at the board being washed. When you place boards in t
Electronics Forum | Wed Sep 04 07:15:02 EDT 2013 | anilw2006
We have using SAC305 type solder paste for lead free process. One sample paste received of SN100C.After reflow SN100C type paste joint looks brighter and good compare to SAC305. Please help me which paste is good for smt process?
Electronics Forum | Mon Oct 10 07:40:33 EDT 2005 | pjc
To make an "L" you use a 90 deg turn unit, a.k.a. "diverter" conveyor, then connect to a straight or linking conveyor. Go to this link to see turn unit: http://www.flexlink.com/wps/public/s/10000/c/29667
Electronics Forum | Thu Mar 09 00:45:57 EST 2006 | kent_peterson
Fastek will get it done with 2 machine and 2 shifts. 2 shifts would need to place 50,000cph. One CP643 with both device tables set could get it done. Having it panelized in 50's, you would need to print 50 panels a hour so get a auto cleaner on the p
Electronics Forum | Thu Sep 05 21:58:24 EDT 2013 | davef
Both SN100C and SAC305 are excellent and tested LF alloy formulations that with proper process management will produce good looking and reliable solder connections. "Bright & shiny" solder connections is NOT a good measure of a properly soldered LF c
Electronics Forum | Fri Dec 17 19:07:47 EST 1999 | Dennis
There are two types of nozzles most commonly used nozzle is vaccum type. but when it comes to odd component which is not standard either plain form. must use machenical grapper to pick up the component
Electronics Forum | Thu Feb 24 11:45:17 EST 2005 | JB
Any Universal GDM users out there, what nozzle type are you using succesfully to dispense glue on 0603's? Single or Dual tip? How about standoffs? Thanks in advance for the info.
Electronics Forum | Sun Jun 18 21:41:58 EDT 2006 | Thanagon
Dear Sir, We used TAMURA type : TAF30-12DNS. This type nozzle can't moving up and down but we will modify that.Please comment that is O.K.? Regards, Thanagon
Electronics Forum | Fri Jun 16 08:37:51 EDT 2006 | Chunks
What type and brand of fluxer?
Electronics Forum | Mon Aug 31 06:26:44 EDT 2015 | piyakorn
Hi At our SMT mounting found battery clip stick in the reel pocket and some dropped under pick&place machine from the nozzle can not pick out the part which got recommendation should change the nozzle type from standard placement to be clip sho
