Electronics Forum | Thu Oct 20 08:55:09 EDT 2005 | pjc
Gemini is dot machine only, no lines, circles, etc.... The model 5000, 1818 and XyFlex Pro can do all. http://www.speedlinetech.com/camalot/index.aspx
Electronics Forum | Tue Aug 10 15:56:30 EDT 1999 | Jason Gregory
Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulation i
Electronics Forum | Wed Aug 11 11:54:50 EDT 1999 | Dave F
| | Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulati
Electronics Forum | Wed Aug 11 10:21:03 EDT 1999 | Brian
| Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulation
Electronics Forum | Wed Aug 22 14:24:39 EDT 2001 | markhoch
I used a CamAlot 5000 to apply conductive epoxy on an aluminum substrate about 4 years ago. I used the largest diameter nozzle CamAlot had, and I bumped the dispense and dwell times way up. It was the slowest stage in the process, but it worked out o
Electronics Forum | Fri Mar 27 22:37:57 EST 1998 | Stan Traxler
| I would like to hear from other users of their experiences | with CAM/ALOT adhesive dispense machines. | Pros and cons?? | If anyone has comparisons with other equipment that would be | great too. We have a 3800 and a 5000, both have worked withou
Electronics Forum | Mon Mar 06 11:14:19 EST 2006 | vip_tech
Looking for information regarding the Vision Camera for a Camalot 1414 Dispenser; - camera specs - where to buy a used camera. Thanks in advance.
Electronics Forum | Fri Sep 22 04:54:45 EDT 2006 | nemachines
Hello North East Machines Ltd have a Camalot 5000 and a Asymtek A-600c for sale. www.northeastmachines.com
Electronics Forum | Fri Apr 03 12:39:09 EST 1998 | Tom Tellinghuisen
We have used an 1818 for the past 10 years with no problems to speak of. We also have a model 5000 in-line with our equipment. Both machines are never any problem, as long as you keep the pumps cleaned. We are also looking to add a Gemini in
Electronics Forum | Tue Apr 02 11:21:46 EST 2002 | BTaylor
davef I assume this question is for my reply and me. We used a dexter\hysol underfill and a Camalot 5700 to dispense.Single line technique next to a small IC with 14 bumps around the perimeter.The conformal coating was applied with a small brush aro
.gif)
winsouce.jpg)