Electronics Forum | Tue Jun 28 04:40:14 EDT 2005 | thaqalain
Motherboard:Intel: D845GLLY requiring PC133,128MB I done all 3 possible cases: I-Inserted AZEN RAM PC100,128 MB in Slot#1 with Kingston PC133,128MB in Slot#0,it read 126 MB. II-Inserted PC100 only in Slot#0,it read only 64 MB and Ssystem was exces
Electronics Forum | Thu Aug 08 15:47:07 EDT 2013 | joeherz
Shawn, Wow. This is a tough one. The part is a 1 pc where I'm used to seeing a 2pc. In our case, we have several assemblies using a 2 pc system (see Laird BMI-S-207-C and BMI-S-207-F). The "C" and the "F" stand for Cover and Fence. The Fence is
Electronics Forum | Thu Aug 04 11:38:53 EDT 2011 | emeto
If you think it might be connected to Video card or RAM you can put a PC with better parameters. In my case the application dies with a standard Windows message.In the beginning I would blame the camera, but after that I realized it is doing it when
Electronics Forum | Thu Nov 14 15:46:28 EST 2019 | assuredtech
> I think it has something to do with the > communication between the 2 computers. Plug a > monitor into the back computer rack and see if > there is an error showing when its trying to boot > up. Its been a long time....so dont qu
Electronics Forum | Mon May 01 15:55:35 EDT 2006 | pfifla1
Well Fuji sends software updates directly to PC and at the end of every year it is required to install the new updates to keep running so pretty much if you have the PC you have the software for life. unlike software like circuitCam and others that u
Electronics Forum | Fri Jan 05 13:15:59 EST 2007 | jhaviland
Depends on your company's IT policies. I have seen some companies where IT will not touch a production PC since it was not a standard IT issue PC, I have also seen some companies IT department do normal backups of the machines. (personally) whoever c
Electronics Forum | Mon Sep 17 11:07:45 EDT 2007 | floydf
We had the mother board in a Samsung CP40 stop booting up. We have since fixed that (reseated the cpu). I tried putting a pc in place of the mother board. I loaded the program, and plugged the bus line that commuinicates to the machine in the pci slo
Electronics Forum | Thu Aug 04 09:27:25 EDT 2011 | rway
Software, software, software. It always seems to be related to any hardware issues we experience with our systems. Can you expound on "crash?" How does the software crash, what are the symptoms. Does it just lock up and become unresponsive, camer
Electronics Forum | Tue May 25 12:24:17 EDT 2021 | bukas
is Mark3 program started on startup or do you start it manually? It can be like this if you run it manually. Other cause is bad contact in PCB slot or connector in 90% cases. Wash then with contact cleaner and insert and pull out few times to clean c
Electronics Forum | Thu Feb 08 16:50:38 EST 2007 | mika
Why not? Sounds like a good idea. Almost all other forums that I visit req. registration before posting. Another benefit is that it is possible to ban a member if acting improper on the forum. It should also be possible to report a posting to the sta
