Electronics Forum | Tue Mar 19 13:32:21 EDT 2013 | rgduval
In the past, I've used kapton tape for masking, as well as masking tape and solder mask as you've described. I've also used dummy connectors, or connector caps to cover connectors/pins. In the end, though, I'm not sure any of these methods decrea
Electronics Forum | Thu Jan 22 11:12:06 EST 2009 | davef
Conformal coating masking: Electronic equipment manufacturer's use conformal coating processes to protect printed circuit modules from moisture, fumes, rapid temperature changes and other environmental conditions. Typically, pressure sensitive tapes
Electronics Forum | Thu Feb 01 07:41:01 EST 2018 | dontfeedphils
Interesting, never heard of using wax as a coating mask. Not sure how well the AR coating would hold up to a hot alkaline wash (unless you have experience with it), but that stuff usually starts to flake off/de-wet if you just look at it wrong. I'm
Electronics Forum | Tue Mar 06 07:18:26 EST 2007 | Rob Cass
I actually bought this tape directly from a disrupter of Saint-Gobain series M797. It was placed on 6" x 9" sheets to have unique conformal coating masking cut outs made. Took some effort to get the process worked out but all is well now.
Electronics Forum | Wed Mar 06 10:29:40 EST 2013 | sara_pcb
What is the minimum solder mask thickness required for Class 3 products. We are insisting fabricator of the pcb shop to use only spray coated solder mask. The SM thickness on the epoxy is about 17 microns, In the center of the tracks are 8 microns an
Electronics Forum | Wed Jul 22 15:35:44 EDT 1998 | Katy H
Check out Precision Valve & Automation Latham, NY Phone: 518-782-3436 They make a relatively inexpensive system for applying material. You can choose spray or valve dispensing or both. The product is built simply and has been relatively easy to set
Electronics Forum | Thu Jul 02 02:47:10 EDT 1998 | Graham Naisbitt
Wayne, We make such equipment both as batch and in-line systems, IR, UV curing as required. We have over 1000 systems installed worldwide. Are ISO9002 qualified. If you can let me have your address, I will get you more info. Maybe you could elaborate
Electronics Forum | Mon Sep 26 16:48:32 EDT 2005 | PWH
Are you using masking? Conformal coat will de-wet (no pin holes usually, though) due to masking tape adjacent to affected areas if the tape glue chemistry isn't compatible with the conformal coat.
Electronics Forum | Wed Aug 19 03:24:49 EDT 2015 | pcbman
I ordered few times of prototyping gold plating > pcb from China. How to i differentiate they are > ENIG or Flash gold? Hi,Friend , this is very easy to distinguish the ENIG and gold plating pcb, you can stratch the solder mask off and see the co
Electronics Forum | Wed Sep 30 18:48:56 EDT 1998 | Graham Naisbitt
Jim, Without knowing your location, I suggest: 1 Send me samples of the components you want to mask - maybe I have something available off the shelf. 2 Call Kinarney Rubber Company in New Jersey (sorry, Noo Joysy!) They have a wide range