Electronics Forum | Mon Jul 18 21:00:22 EDT 2005 | grantp
Hi, Yes, I would love to know this as well. Our machines can handle the component sizes, but how do the printers handle it? We have a DEK, and that's a good printer, but how do you design the stencil to reliably paste release on components this smal
Electronics Forum | Wed Jul 20 16:51:03 EDT 2005 | pjc
There is a spec I read that states +/- 0.001" (0.025mm) print deposition accuracy and repeatability is more than adequate for 0201-chip printing. I don't think any print studies where done for 01005 chips yet. There are several other factors besides
Electronics Forum | Fri Sep 24 16:26:57 EDT 2004 | pjc
MPM kick's butt on both in terms of accuracy, repeatability and durability. What more would you want?
Electronics Forum | Tue Mar 02 17:26:24 EST 2004 | pjc
I worked on MicroFlex. All axis move via electric motor drive. Carraige reapatability is +/- 0.0005" (12 micron). Cameras position more easily on linear bearings than the swivel type. The alignment accuracy and repeatability easily supports sub-20mil
Electronics Forum | Sun Dec 20 12:42:57 EST 2015 | dilogic
We have DEK248 and Ultraprint100 printers. Ultraprint100 has custom video hardware while DEK has PC-based vision,which I prefer. Both perform roughly the same, and each has some design advantages over the other. We do routinely print 0.5mm pitch TQF
Electronics Forum | Sat Mar 04 16:56:13 EST 2017 | crecinos
A dispensing glue machine that you recommend? Currrently I am using a DEK 03iX for this operation, but cycle time is too slow, so I am looking for a glue dispensing machine, fast and with very good accuracy.
Electronics Forum | Mon Aug 12 13:11:47 EDT 2002 | pjc
I am not a DEK user but have some knowledge of the ELA to share. The ELA has some structural differences with the Horizon and Infinity models. It is DEK's low-end automatic printer (a cost-reduced version of the Horizon model)and is manufactured in C
Electronics Forum | Tue Dec 23 06:00:36 EST 2003 | Grant Petty
Hi, I am now looking at a DEK as an option, and might raise our budget for this to about $150K. I am not sure which model to look at. We want to do 0201 reliably, and so we need accuracy, but we would also like to get vision inspection so we can let
Electronics Forum | Thu Oct 02 08:09:04 EDT 2008 | pwilson1
Hi All, I am currently in the process of selecting a new stencil printer and have narrowed it down to the MPM125 or DEK Horizon 03i.. We re a UK medium volume production facility running quite a high mix of double sided PCB`s. W
Electronics Forum | Mon Mar 13 14:25:11 EDT 2017 | claytoneh
A dispensing glue machine that you > recommend? > > Currrently I am using a DEK 03iX > for this operation, but cycle time is too slow, > so I am looking for a glue dispensing machine, > fast and with very good accuracy. The fastest that I have
winsouce.jpg)