Electronics Forum | Wed Nov 16 16:15:31 EST 2022 | babe7362000
Does anyone have a better way of holding large reels for the Mycronics machine? The arms are quite expensive so I currently use an ESD bin with a rod in the middle. It's kind of a pain when you need to change a reel. I saw a really cool bin, but the
Electronics Forum | Wed Nov 16 21:35:07 EST 2022 | stephendo
" so I wander what can I do to save them?" The boards or management? Seriously I think this is more of a management issue than a technical issue. We can suggest what to do but if management does not accept that solution then it won't work. I'm not s
Electronics Forum | Wed Dec 28 18:09:47 EST 2022 | atpico
Second question concerning MPM UP2000HiE: Are there two options of conveyor lengths for this printer? Looking for conveyor belts spare parts I found two options: One 137" and one 106" that gives about 134 and 174cm total conveyor lengths. Does any
Electronics Forum | Fri Dec 30 20:12:47 EST 2022 | ttheis
I found a broken COM3 connector on the fluxer interface board where the PC comms go through and replaced the connector. Now when trying to establish communications the exhaust fan turns off briefly a few times then it times out and reports a failure
Electronics Forum | Thu Jan 19 18:11:45 EST 2023 | atpico
My UP2000 HiE Printer on Power-ON during initial Reset will show this error and reset will abort with no way to continue. E00938 10 - HARDWARE LIMIT WARNING In Input/Output Screen all Sensors are in normal situation and will react normally when t
Electronics Forum | Tue Jan 24 22:32:09 EST 2023 | rgduval
So...FactoryLogix does all of that through integrations with KohYoung and Panasonic (as well as most other machines found in SMT assembly). Realtime data is captured during assembly by UID, and can be viewed in live dashboards, scheduled reports, et
Electronics Forum | Thu Mar 23 04:44:46 EDT 2023 | gwideman
We are looking to obtain (probably make) the calibration tools used in the camera calibration procedures. To that end, any photos and dimensions would be highly appreciated! The set consists of one or two plates and a hat that fits on the up camer
Electronics Forum | Thu Apr 20 22:08:07 EDT 2023 | saucyshawn
Mycronic is very expensive. But it does have a lot of good options and feeder count. JUKI I have always found to be limited to number of feeders and flexibility of individual machines. If you are upgrading from MannCorp there may be better options
Electronics Forum | Tue Apr 25 20:22:32 EDT 2023 | ttheis
We have a line running GSM1 machines and we are considering upgrading to GX-11S machines with FJ3 heads. Does anyone know if the GX-11S machines can take pneumatic feeders from the GSM machines? We have a very large inventory of the pneumatic and ele
Electronics Forum | Wed May 10 01:21:21 EDT 2023 | gwideman
@bobpan Thanks for your reply. We did not previously know about "selektiv". It seems an odd choice of word. Translated from German to English, apparently it means "selectively". I have now tried that for both user and passwo
