Electronics Forum | Fri Dec 14 19:56:40 EST 2018 | denisss
Good afternoon, the problem gives an error vision gantry x, an error occurs after the camera approaches the car wash and hits the piston, what could be the matter? are there any real specialists gives an error after a certain working time of 40 minut
Electronics Forum | Sat Sep 05 23:15:32 EDT 2009 | prasadz
We have successfully implemented this dual Process You can use any printer that supports Board width 500mm. SMT Dual Process Maximum PCB Width should be (500-20 / 2 ) = 240mm Max (PCB width )Printer support = 500mm Top width + Bottom width
Electronics Forum | Sun Jul 14 21:24:23 EDT 2024 | simonattwood
There is at least one printer I've seen that takes two stencils at a time and runs them in parallel. Another has a two conveyors and will use one to pass through with the idea that you'd put two printers next to each other, feeding different sides of
Electronics Forum | Fri Jul 12 12:00:13 EDT 2024 | jdengler
How would you print 2 different products in the same line? This seems to me to be the sticking point on that approach. I don't see enough benefit of dual lane to justify the added expense. Remember you will need to have dual lane conveyors possibl
Electronics Forum | Tue Oct 06 05:01:22 EDT 2009 | martinphill
Printer(DEK265)-->Gule -->SPI -->Mounting(NXT)-->AOI -->Reflow -->
Electronics Forum | Tue Jul 30 11:43:11 EDT 2024 | sophyluo1985
Correct, you can use a dual-track pick-and-place machine, but the front-end machine must be able to meet your production, such as a printer. If you are back-to-back, what is the CPH of your pick-and-place machine? What is the size of your PCB? If po
Electronics Forum | Mon Oct 05 04:41:28 EDT 2009 | pengliang
Printer(DEK265)-->Gule -->SPI -->Mounting(NXT)-->AOI -->Reflow --> Bottom Loader --> Printer(DEK265)-->Gule -->SPI -->Mounting(NXT)-->AOI -->Reflow --> Touch up -->ICT -->BL -->FT -->Assembly
Electronics Forum | Thu Nov 28 09:42:51 EST 2002 | Claude_Couture
MPM SP200 are nice. Visual alignment with cameras. Get the one with dual head if you want metal squeegees. We have produced boards with .020" fine pitch with very good results. Unfortunatly, MPM does not sell those anymore, so you have to hunt for a
Electronics Forum | Wed Feb 03 15:32:06 EST 2016 | sarason
Congrats, that is lovely work! Why did you run dual monitors instead of a split screen type Application? sarason
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
winsouce.jpg)