Electronics Forum | Thu Jan 14 09:25:34 EST 2016 | davef
IPC-A-610F 10.2.6 Laminate Conditions - Depanelization talks to the acceptability of the depanelization criteria for assembled boards. There is no requirement for moisture sealing with epoxy or other material. Basically, the standard requires that th
Electronics Forum | Tue Oct 31 19:28:24 EDT 2023 | ttheis
We built our own coating system by mounting a Universal Robots UR5 to an edge conveyor between a magazine unloader and magazine loader. The robot has a needle dispenser on the head. We chose a needle dispense process to avoid aerosols and complex ven
Electronics Forum | Thu Mar 31 10:14:06 EST 2005 | davef
There's some nice low-VOC uV coatings out there. We don�t use uV cured coatings, but try: * http://www.emersoncuming.com * http://www.dymax.com * http://www.mgchemicals.com * http://www.loctite.com * http://www.humiseal.com Be aware that uV co
Electronics Forum | Fri Oct 29 09:08:21 EDT 2004 | davef
Electrochemical migration under conformal coating: That's possible. Very few conformal coatings are water resistant. So, if you have ionic material on your board, standback. Uncured material under several IC: Materials like yours need moisture fro
Electronics Forum | Tue Jul 03 01:54:42 EDT 2018 | rdhiman1
Reaching out to all conformal coating experts, please help! While setting up conformal coating using the automated atomized spray, we observing issues associated with conformal coating wetting on the following regions: 1) Component edges 2) Metalli
Electronics Forum | Wed Jul 31 17:25:39 EDT 2002 | sueph
Dave, thanks for the reply. These boards have metal plating covering 99 percent of both primary and secondary surfaces. The only places without the metal plating are the extreme outer edges and about an 1/8 inch surrounding the plated holes. We do
Electronics Forum | Thu Aug 01 12:58:07 EDT 2019 | davef
Look at: * Conformal Coating 101 - https://www.smta.org/chapters/files/UpperMidwest_BTW_Conformal_Coating_June_27th_2012.pdf * IPC Conformal Coating Course - https://edge.ipc.org/course/conformal-coating * IPC-CC-830: Qualification and Performance
Electronics Forum | Mon Jun 01 08:12:06 EDT 2009 | davef
If the operator has zero charge and the board has a 10kv charge, when the operator pulls the shorting strip from the edge connector after the coating has cured, there is a large potential for ESD induced damage.
Electronics Forum | Wed Mar 11 15:43:19 EST 1998 | Brian Stumm
For Sale: Curing oven for conformal coatings, adhesives, etc. 200" overall length includes edge rail conveyor, cooling section etc. Perfect for use with the Nordson Select Coat line but also can be integrated with other coating lines. Price: $40,00
Electronics Forum | Wed Jan 31 18:13:30 EST 2018 | sarason
Hit wax dip of your edge connector. HVLP spray your conformal coating. hot alkaline wash to remove the wash. Followed by de-ionized water. Other techniques using peallable latex. Sarason
