Electronics Forum | Tue Mar 29 13:14:28 EST 2005 | bobpan
Anyone familiar with making smema work on the ekra x5. I believe is was manufactured with a siemens (not smema)setup. We found the cables to make the siemens work but i am not sure if i can short a couple of inputs on the cable to make the smema func
Electronics Forum | Tue Nov 13 04:47:19 EST 2018 | dhammika
hi Siplace Hs-60 defected due to below error Error- • Machine error:2271 Can bus: reception call aborted with time out seg:0 DEV: head 2 #:1 (this is not only head 2 ,error raise with all head interm
Electronics Forum | Sat Apr 09 00:37:42 EDT 2016 | smtsparescn
Are you sure it can work even somebody do clone the software and copy to you, Normally it isn't like adding a patch to windows of a pc,
Electronics Forum | Thu Sep 26 13:55:54 EDT 2019 | ttheis
One of our GSM1 machines occasionally stops running in the middle of a program and I haven't been able to figure out what is causing it. When the issue occurs, the "BM" (bus master) light on the SYS68K card drops out (turns off, no activity) the boa
Electronics Forum | Wed Dec 23 12:24:37 EST 2020 | ilavu
1. Palm down the GSM and open the safety cover to check input voltage +12VDC (at KDC2 3PL pins 2 to 3) and output voltage +5VDC (at KDC2 2PL pin 4 to 3) at the DC/DC converter. The DC/DC converter is located inside the control panel assembly ("Nose c
Electronics Forum | Wed Jun 01 22:42:50 EDT 2016 | dinhhuunam
CAN Node Not Responding This problem can be caused by either: 1. Faulty Node 2. CAN bus cable disconnected. 3. No power to CAN Node.
Electronics Forum | Tue Jan 05 07:01:37 EST 2021 | djwave
Hello, thanks for your replys. Our EKRA E5 only boots and use the front computer (old PC with MSDOS and software), the rear one always is off, dont start when i switch machine power, dont know if is required for operate the EKRA. We turned on the EK
Electronics Forum | Thu Apr 09 15:22:36 EDT 2020 | tbst
Hello, You can also use SD 218 -40 from HEP This is the Part who EKRA Company used After EOL from the HF The EKRA-Part.Nr. Is 5340000133 Its to use for 2x T8 , 18 , 25 36 W Or if you find Dome Times EKRA has used Quicktronic del Luxe HF36 for 2x 36
Electronics Forum | Fri Sep 26 19:26:17 EDT 2014 | magan
Hi Everyone, I have an Ekra x5 printer and I'm having reference drive issues with my printer. If anyone have english operator/service manual for ekra x5? I'll be happy if someone can send me the manual for this printer. Thank you
Electronics Forum | Sun Jun 17 16:55:06 EDT 2018 | kumarb
Hello. We are servicing our Ekra X4 and will appreciate any user / service manual for the Ekra E4 / X4. Also welcome consultants whom we can ask questions about this machine as required. Many thanks. kumar at softio dot com
