Electronics Forum | Mon May 13 08:41:17 EDT 2019 | relaycz
Thank you for your quick answer. We don't have SPI, but our main constrain is pick and place as our production is very high mix. I'll definitely take a look at Ekra and Yamaha.
Electronics Forum | Thu May 13 23:01:07 EDT 2004 | fastek
Unplug the tactile sensor and check the switch with an ohm meter. If the tactile sensor switch is good go in one of the drawers in the back of the machine and with the help of your schematics find the opto-module that controls the tactile sensor circ
Electronics Forum | Fri Mar 04 04:44:16 EST 2005 | ianlg
Hi I do not expect that anyone will provide you with schematic s for the board itself as providing detailed info on the boards was regarded as a no no when I was working for SMTech/Speedline SMTech. We do not ourselves have detailed schematics but
Electronics Forum | Fri Nov 05 07:14:04 EDT 2021 | oxygensmd
The question is that what do you want? An automatic/semi-automatic machine or a hand-prototyping printer? Using metal-sheet or complete (framed) stencil? Manual printing: For example, Eurocircuit's eC-stencil is pretty nice or there are cheap hand-s
Electronics Forum | Mon May 13 08:31:48 EDT 2019 | robl
Do you have in line 3D Solder Paste Inspection machines? If not the 2D inspection on the SP710 is very slow & not a patch on Hawkeye from DEK. If print time is not an issue then it doesn't matter. I have had both types of machine, and personally pre
Electronics Forum | Wed Mar 09 10:20:02 EST 2005 | Keith
Hello Deyo, With regards to schematics for these boards, SigmaPrint Technologies Ltd as the authorized provider of spare parts for the SMTech range of Equipment have these drawings on file along with all other SMTech manufacturing drawings. Sigmapr
Electronics Forum | Wed Nov 03 16:35:03 EDT 2021 | smtusa
We are big mpm fans especially the UP2000/2500 dos based. I just got an MPM SP2000 but feel thats too big. I would like something even smaller for an office setup. I looked up the MV100 and it came up with a pic of Quad. It looked pretty big in p
Electronics Forum | Tue Apr 20 10:37:27 EDT 2004 | rob_thomas
Debi, Both machines are good and will do a great job for you on Rigid as well flex circuits.Every Mfr.will come to your site and give you a piece of equipment on loan to try for a month hoping you'll buy from them.Why don't you arrange that little ex
Electronics Forum | Fri Feb 13 09:25:35 EST 2004 | jcdupree
Hi Patrick, I can easily troubleshoot ML, EL and SL 20 systems by phone or e-mail, but the MPC-29 is a bit more complex. The problem that you are describing was failry common, and there were a number of potential causes. First is to check if the dr
Electronics Forum | Mon Feb 23 12:22:32 EST 2004 | esoderberg
I have an MPM SPM and two Ekra E4 screen printers. I have always run them dry with vacuum. I am also using no-clean paste and have not had a problem. The volume I run per day on the machines is 4 - 6,000 bds
