Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Wed Dec 06 09:29:31 EST 2000 | Kris W
Happy Holidays to all! Has anyone seen or heard of an automatic cleaner for squeegee blades and holders? I searched the archives and found nothing! I simply don't want to tie up the stencil cleaners with squeegees! thanks, Kris
Electronics Forum | Wed Nov 24 09:45:54 EST 1999 | Boca
We have been using TA permalex blades for year, they work great! They will even work with you on custom designed blades to fit custom blade holders. If you're having trouble with solder paste sticking to the blades contact the vendor for some solut
Electronics Forum | Tue Mar 14 09:54:34 EST 2006 | slthomas
"45* is a common angle of attack. Squeegee blades are commonly manufactured at 60*. The combination of the angle of attack and the blade angle results in an actual printing angle between the two due to down pressure and flex of the blade." Ahhhh, so
Electronics Forum | Thu Aug 17 21:56:05 EDT 2017 | v037022
Dear experience members, Now we are using permelex squeegee blade and we do cleaing it after printing 24 hours. Actually, it took very long time to clean. we need to take out one by one screw and use bemcot paper/ alcohol to clean solder remaining on
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Wed Feb 03 09:34:43 EST 2016 | oxygensmd
He everyone, We have an Ekra E5 screen printer which is really nice machine I think. Now I'm looking forward a new squeegees set. I don't know the E-series and the X-series can use both squeegees? Are the squeegee holder the same on this two machin
Electronics Forum | Thu Aug 03 10:13:41 EDT 2006 | wrongway
Hello Rush fan we have a Ekra E5 had it about a year the only thing I dont like is the foil on top of the doard holders you can take them off but if your board is warped then it dosnt clamp the board and it will fail the vision but we hav
Electronics Forum | Mon May 13 08:31:48 EDT 2019 | robl
Do you have in line 3D Solder Paste Inspection machines? If not the 2D inspection on the SP710 is very slow & not a patch on Hawkeye from DEK. If print time is not an issue then it doesn't matter. I have had both types of machine, and personally pre
Electronics Forum | Tue Jun 06 13:47:10 EDT 2023 | oxygensmd
In Hungary there are many EKRAs. Bosch, Zollner and many big/small company are using them. I also saw the latest DEK but I think DEK is over-complicated, fast and good printer - but if you have any problem, it cost a lot. MPM also nice machine but I
.gif)
