Electronics Forum | Sun Feb 27 05:58:06 EST 2005 | raj_nz
YV100XT pick and place machine keeps on coming up with FLYING NOZZLE ERROR...any ideas whats the cause
Electronics Forum | Wed Feb 13 16:27:28 EST 2019 | aldrich17
R axis is the rotation of the heads. 180 degrees and -180. The sensors tell the machine when the heads are switched correctly on the flying nozzles and the correct rotation. also i think they involve the clutch as well. After i make an adjustment to
Electronics Forum | Sun Aug 01 12:08:32 EDT 2004 | Ace
Hello An asset to any production floor. I worked with the Sony the SI-E1000 and SI-E2000, The SI-E1000 has a 12 nozzle planet head, I actually ran many placement trials with these machines 0603 (metric) 0201 (Imp). What can I say!! capabillity was
Electronics Forum | Tue Nov 11 09:45:44 EST 2008 | slthomas
Is the package too large for the nozzle? They can rotate (or just fly off) after centering if they're not stuck solidly to the nozzle when they're being rotated for orientation.
Electronics Forum | Tue Feb 15 20:59:16 EST 2005 | ashley
Hello Snr Tech, kindly isolate the problem if it's coming from the indentified holder or the nozzles itself, by swapping between holders. there will be oxidisation on aluminium, from which your nozzles are made after a period of time. impurities, sr
Electronics Forum | Thu Mar 23 07:17:30 EDT 2023 | bukas
I have one plate and nozzle if you want dimensions. And fly camera tool.
Electronics Forum | Tue Feb 15 06:53:50 EST 2005 | cyber_wolf
It seems that every time we do maintenance on our CP6 windmills, we have a lot of problems with nozzles sticking up inside the holders. It seems to happen for a while, then it goes away after we run for a bit. We follow the Fuji maintenance procedure
Electronics Forum | Thu Jun 25 03:08:58 EDT 2020 | jmelson
I see some Quad QSA30 machines on an auction site. They are obviously made by Samsung, and look a LOT like, maybe the Smasung CP40. Can anybody give their experience with this model? I was at an auction for a CP45FV machine, and was VERRY impresse
Electronics Forum | Tue Jul 21 06:59:53 EDT 1998 | WAYNE
| Panasonic Create: What (Where) are your pad design and design quidelines that you have in-place? Dave F Dave" Thanks for the response. Many people I have talked with are interested in 201's, but are not placing at this time. I am curious about
Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t
.gif)
