Electronics Forum | Tue May 25 10:40:06 EDT 2004 | smokejumper
This could be a dirty glass scale. alignment or gap. step one clean the glass scale. if the number changes 1 - 0 when you move the head it is probably an aligment or gap issue.
Electronics Forum | Mon Sep 12 22:50:52 EDT 2022 | superlen
Poly, I've seen the same error occur with our GI-14 when the glass scale encoder is simply dirty. If you bought the machines used, they could have been stored in fairly dirty environment. Just clean the glass scale. (use caution). We use lint free cl
Electronics Forum | Thu Nov 01 16:06:54 EST 2001 | Stefan Witte
I disagree on the dirty glass scale offset theory. If you have a dirt spot on the scale, every time the axis comes over the spot it misses counts. After a few movements it will not find the components in the feeder anymore, because the failure adds u
Electronics Forum | Wed Sep 25 09:59:44 EDT 2013 | bobpan
Hello, This is from my old documents....hope it helps. I would first try mod code 53 = 2 first.....if the machine is a 2C. The motor was known for causing this problem after getting old. These are all resolutions for motor error 4. Step Potential P
Electronics Forum | Thu Sep 20 02:50:30 EDT 2012 | haiae
Thank you for your message. After many trying to find the error I found the cause. The reason is dirty linear scale glass for head one and after clean it the machine can homing easy. I hope this inform may helpful for user who are using contact machi
Electronics Forum | Thu Feb 14 22:19:05 EST 2008 | ashley
hello Keith, the problem may be related to a faulty / dirty linear scale. kindly check on the yellow strip along the X axis. clean & clear the glass linear scale of debris & grease. for Fuji support & spare parts, please write to :- apexservice@
Electronics Forum | Thu Jun 18 17:20:24 EDT 1998 | Dave
I am currently using some pick & place equipment and would like to measure their cpk using a glass plate and glass "components" with vernier scales. I have seen these kits but am trying to track a supplier down in UK/Europe. Any help is much apprecia
Electronics Forum | Thu Jun 18 19:17:16 EDT 1998 | Ben Salisbury
| I am currently using some pick & place equipment and would like to measure their cpk using a glass plate and glass "components" with vernier scales. I have seen these kits but am trying to track a supplier down in UK/Europe. | Any help is much appr
Electronics Forum | Sun Sep 18 00:46:20 EDT 2022 | poly
This may sound silly but... I'm not sure where the glass scale is for the width axis. There is a Heidenhain rod 1020 rotary encoder connected to the motor that moves the width control, but I can't see any linear encoder / scale. I've given everything
Electronics Forum | Thu Sep 23 11:37:43 EDT 2010 | flipit
I had 4 of these machines. They are good machines but I have seen this error often. Is the problem only on one head L or R? If so swap electronics L to R and see if it follows. You can even swap the Y motors. The items that could cause this prob
.gif)
winsouce.jpg)
