Electronics Forum | Thu Jul 28 17:35:45 EDT 2016 | travishemen
We have similar machines and they will give errors like this if the adjustable sensor on the unload end is over the fixed or movable rail.
Electronics Forum | Thu Jul 28 15:43:48 EDT 2016 | ddina
Recently started setting up our GSM 4681A system, and one of the machines comes up with the message "WAITING FOR OUTPUT BOARD TRANSFER TO COMPLETE" after the Zeroing process has been started. Machine has all the defaults set, two SMEMA connected univ
Electronics Forum | Fri Jul 29 17:41:35 EDT 2016 | ddina
I appreciate your response. I kind of read about it, and made sure nothing sensor-wise is activated by mistake on the process of zeroing. Right now the machine is in this set up, and the rear rail is all the way to the back stop. So the sensor on the
Electronics Forum | Fri Dec 08 13:25:18 EST 2006 | SWAG
We have a heavy carrier that results in belts spinning out when our GSM attempts to transfer it to the centernest. Can the belt transfer speed be slowed down on GSM? How???
Electronics Forum | Thu Feb 04 09:27:01 EST 2010 | swag
Put new belts on. Tension means nothing if belts are worn out and stretched.
Electronics Forum | Tue Jan 26 08:57:01 EST 2010 | Jeff
Check your belt tension on the theta motor.
Electronics Forum | Mon Dec 11 12:02:34 EST 2006 | SWAG
Got it - Thanks much Mika.
Electronics Forum | Mon Apr 29 20:27:49 EDT 2013 | ericrr
HI all, does anybody have the conveyer (transfer) belt part for JUKI KE-750L, sorry to bug you, there are two types making six per machine from Eric
Electronics Forum | Sun Sep 15 04:45:22 EDT 2013 | jandon
Cleaning and lubrication requires maintenance training. You can really break something if you don't know what you are doing. For example you can break your expensive rubber nozzles or cameras with inappropriate cleaning. Check: - Piping and joint -
Electronics Forum | Tue Jan 26 13:47:26 EST 2010 | swag
In addition to what Jeff wrote (I agree 100%) I would advise installing new theta drive belts on both heads. We had the same error at one time; if I remember right, I was told the new belts are better mat'l. It's likely your old ones are worn.
winsouce.jpg)
.gif)