Electronics Forum | Fri Sep 22 12:37:18 EDT 2000 | jonyoder
I am having problems with SMT electrolytic capacitors expanding and changing values after going through our reflow. The reflow profile we use includes temperatures of 200 deg C for 60 seconds and 230 deg C for 30 seconds. We need to use this profil
Electronics Forum | Mon Nov 12 15:21:09 EST 2012 | davef
High-temp ball Sn10Pb90 + eutectic solder paste is common place for MLC reflow. Temperatures necessary to alloy the high-temp ball Sn10Pb90 and eutectic solder would be high enough to compromise interposer, board and many components. What are your:
Electronics Forum | Thu Nov 08 10:52:22 EST 2012 | Bryan Ng
I am considering using high-temp ball Sn10Pb90 + eutectic solder paste for MLC reflow (no underfill). You can see that there is no Intermetallic bond for the paste and the balls. Under high stress/shock condition, the solder joints develop micro c
Electronics Forum | Fri Sep 22 15:12:36 EDT 2000 | John Thorup
Hello Jon (?) Sounds like it's just plain too hot. The Panasonic VA series specifies a maximum preheat temp of 160C for
Electronics Forum | Wed Mar 16 20:12:12 EST 2005 | bkd
Does anyone knows any vendors that supplies jedec precondition tray that could stand up to 270�C peak reflow temperature.
Electronics Forum | Thu Jan 20 14:46:26 EST 2011 | dscott6977
Just wondering if anyone has a Heller reflow oven and is currently or in the past use Tribol 1421 high temp chain oil. Thanks.
Electronics Forum | Tue Feb 01 14:18:20 EST 2011 | markyen
We have Heller oven for over 8 years now and we use Heller industries Inc. Edge holder chain lube Part number: 680784 Overon F232-iso vg 220
Electronics Forum | Fri Jan 21 11:28:39 EST 2011 | nucleartoast
I worked for Electrovert for 20 years and up till today the 1421 is still the oil of choice. The chain doesn't care who's oven it's running in but it does require regular lubrication.
Electronics Forum | Thu Jan 27 05:36:37 EST 2011 | 15009
We use it and have had no issues on either oven. 1 Conceptronics, 1 Heller.
Electronics Forum | Tue Apr 25 18:51:06 EDT 2000 | Steve Thomas
We have quite a few stencils that either are debonding, have debonded, or we suspect will debond when we can least afford for it to happen. The epoxy is coming loose from the foil, but remains attached to the webbing. All the stencils that are comi