Electronics Forum | Fri May 15 21:12:13 EDT 2015 | jlawson
As far as I know is pretty basic and only matches IPN to a feeder , does not offer serialisation of actual parts. For trace this is not accurate ie trace a btach to a work order to couple of PCB not possible. This may have changed in latest JUKI off
Electronics Forum | Thu Apr 09 07:42:36 EDT 2015 | kevinb
Thanks for the info. We tried the reset button but no luck. The UPS is not powering up. We checked the incoming power and it was good. So we took the UPS out and took off the cover to check for blown fuses. We also checked the reset button and it
Electronics Forum | Thu Nov 01 14:40:26 EDT 2007 | ck_the_flip
Electrically testing components is an age-old practice of the past. True "world class manufacturers" like to minimize, or even eliminate incoming inspection of ANYTHING - the theory being....a world class manufacturer should have such awesome relati
Electronics Forum | Sat Apr 25 07:10:01 EDT 1998 | JoSi
Hi, A collegue of mine, working on incoming inspection departement, asked me if I know any good standard,preferrable on CD-ROM with high-quality images of different defects that can be found on bare pcb`s. I know IPC-standards, but is there any
Electronics Forum | Fri Dec 15 00:11:12 EST 2006 | pnguyvu
Contact Steve Yen @714-636-6211 or incoming@usastencils.com He'll be happy to help to with that. Good luck !
Electronics Forum | Mon Jul 28 08:54:52 EDT 2003 | davef
You are 100% correctomundo about ENIG. When it's good it's good, BUT when it's bad, you just want something else. You know you have black pad, when you see parts falling from the board. First, there is not perfect solderability protection. Second
Electronics Forum | Fri Aug 27 00:26:14 EDT 2004 | charly
hi, encounter few cases PCB was delam after reflow, and the supplier was refuse that this is a PCB manufacturing defect as the fallout is low within one lot. the cost for this scrap is high after PCBA level, my query here are 1) is there any way
Electronics Forum | Sat Apr 25 09:13:26 EDT 1998 | Earl Moon
| Hi, | A collegue of mine, working on incoming inspection | departement, asked me if I know any good standard,preferrable | on CD-ROM with high-quality images of different defects | that can be found on bare pcb`s. | I know IPC-standards, but i
Electronics Forum | Sat Oct 17 10:43:29 EDT 1998 | smd
| Sorry folks. I'm just a naysayer here. Let's look at this BGA thing...... | | We've all been successfully processing down to 16 mil FP stuff for years, now--some of us down to 11 mil. Once the printing process was stabilized, paste rheologies were
Electronics Forum | Fri Nov 22 16:55:30 EST 2013 | hegemon
Head and Pillow defects beneath a BGA are difficult to find, no matter what the equipment is on hand. Since you do not appear to have access to tools that would help you, or $$ to purchase said tools, I might recommend that you use an outside source
.gif)
winsouce.jpg)