Electronics Forum | Mon Jul 22 18:46:57 EDT 2013 | jorge_quijano
I've seen the Pick n Place immediatly after the Screen Printer, but they have a good 2D inspection, so the really do not need an operator to inspect or remove any PCB before the Pick n Place, if you have a good Printer I will not foresee any problem
Electronics Forum | Tue Oct 21 08:06:15 EDT 2008 | maheshbs
I have problem in Jot Automation inspection conveyor. The Problem is that the Good board has to go in down side conveyor & Bad board has to go in upside for rejection or rework. It is unable to separate the good & bad boards. Kindly refer the attachm
Electronics Forum | Tue Oct 21 13:49:06 EDT 2008 | ccouture
How does the conveyor know if a board is good or bad?
Electronics Forum | Wed Oct 22 01:14:04 EDT 2008 | maheshbs
Conveyor is installed after AOI machine. After inspecting the board in AOI it sends the signal to the conveyor whether it is Good board or Bad board.
Electronics Forum | Wed Jan 27 17:32:51 EST 2016 | billthebuilder
We do High Mix, Low Volume and are looking for the best inline AXI with the criteria of industry-leading automation capabilities. The abilities to program offline, automatic conveyor width adjustment and board alignment are important to us. We want t
Electronics Forum | Tue Oct 05 16:38:51 EDT 2010 | tskim83
Our hole inspector gives this error message “Base Hole Error”. It is a flat conveyor-type hole inspection machine from YAYATech that scans PCBs, with an optic sensor and cameras on top of the belt and a light source on the bottom of the belt. And dur
Electronics Forum | Sat Aug 11 16:40:04 EDT 2012 | johnyq
We have a Bosch Edge Pro inspection conveyor. We are trying to get information about it. Is Bosch still in the conveyor business. Does anyone know how to contact them? Thanks.
Electronics Forum | Mon May 01 14:18:00 EDT 2017 | tombstonesmt
Printer>SPI>Conveyor>Gate>PNP>Inspection Conveyor>Oven>Stacker (in case the oven gets backed up)>AOI> NG Stacker>End of line Stacker.
Electronics Forum | Tue Jul 18 03:11:48 EDT 2017 | tsvetan
I recently bought: PCB Loader, Full Automatic Printer with vision with 10 seconds print time, 1 meter Inspection Conveyor, Samsung SM482+Feeders, 1 meter Inspection conveyor, Reflow oven for similar budged, all machines new. I bought them directl
Electronics Forum | Mon Apr 24 11:44:53 EDT 2017 | emeto
It is good to have: conveyor after SPI(if you don't have SPI should be after the printer), conveyor before the oven(inspection station is better), conveyor after the oven - before your destacker if you have one. The rest of it, depends on how long li
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
.gif)
.gif)
