Electronics Forum | Sat Dec 03 01:07:29 EST 2022 | poly
I've got access to the universal manuals / voyager but I haven't found a section that describes the feeder teach setup process, I can pick up the teach slug onto the conveyor and then get into feeder teach but if I teach the corners of the slug as t
Electronics Forum | Fri Nov 25 11:55:22 EST 2022 | poly
So I'm attempting to run feeder teach for my platform tray feeder... but I've got no idea what first point I should teach is... normal is the end pin of the feeder but this is for the ptf conveyor... so I've got no idea. If I just teach each corner
Electronics Forum | Thu May 23 14:35:40 EDT 2002 | pjc
There are instruments from ECD, KIC and Datapaq that are used in addition to classic profiling for oven thermal management and they also have some very efficient prediction software for profiling. I am not an advocate of common profiles. Most boards
Electronics Forum | Fri Sep 30 03:36:39 EDT 2005 | pavel_murtishev
Good day, 2D inspection requires correct adjustment. In the other case it will cause continuous problems and false alarms. Adjust the lightning first and choose the correct process limits second. Look at histogram when you are adjusting the camera
Electronics Forum | Mon Feb 12 13:09:52 EST 2018 | griinder
I see. As you say, Fid coordinates or good measurements should make it easier. 2d inspection setup at the machine may be a little more difficult. Thank you for the clarification. The Momentum's Vision is not inverted, it displays as if you are lookin
Electronics Forum | Tue Feb 22 19:21:05 EST 2000 | Peter
I like MPM's 500 machine. I purchased the predecessor model when it was made by SMTech. This machine has programmable pin supports which made setting up for double sided boards really easy. For auto alignment, I think only in-line machines have th
Electronics Forum | Tue Feb 22 19:21:05 EST 2000 | Peter
I like MPM's 500 machine. I purchased the predecessor model when it was made by SMTech. This machine has programmable pin supports which made setting up for double sided boards really easy. For auto alignment, I think only in-line machines have th
Electronics Forum | Mon Oct 03 09:19:10 EDT 2005 | John S.
We've been using Horizon 01's for a couple of years. We use the advanced 2d board and stencil to setup process control through QC-Calc. It works very well, but you must put the time into setting it up. Ask DEK if they can get you a manual for thei
Electronics Forum | Thu Apr 19 07:38:23 EDT 2007 | bartlozie
Only options we have (i think) is the Unders Screen cleaner unit. and the tooling carousel. (this you realy need, is the best board support system) 2D inspection (i don't know if this is realy a opion) I think 145K is a lot. You can get a better p
Electronics Forum | Wed Mar 07 13:58:06 EST 2018 | griinder
We are using Gerber EZ Teach to inspect near 100% of some boards. Many component footprints seem to be assigned custom packages. These custom packages come up as "preview errors" during inspection. I have noticed when I manually move the camera to th