Electronics Forum | Tue Jul 05 17:09:40 EDT 2022 | madisreivik
PROBLEM SOLVED :) ! I messed with parameters, then started to check hardware again. and.... There are 2 transport position on the carrier 1) vacuum 2) mech clamp Both have fiber position sensor which shows the status When there is component, the
Electronics Forum | Fri Feb 02 15:22:32 EST 2024 | carl_p
Machine a clamp into or from the FR4. to Tension the boards into place
Electronics Forum | Mon Jan 29 13:11:31 EST 2024 | erikfriesen
I'd like to build my own carriers using tg fr4 as we have in house Cnc. Where can I find flush corner clamps? Or are these typically custom manufactured by individual carrier board manufacturers?
Electronics Forum | Mon Jul 04 13:43:38 EDT 2022 | richardcargill
is it a specific part you're having the problem with, or does the fault manifest on a number of different ones ?
Electronics Forum | Mon Jul 04 13:56:23 EDT 2022 | madisreivik
Actually its one part. I had an idea to test some completely different, pre-defined component which has been placed on that machine before. Do You suspect there is a diabolical shape parameter somewhere ? :)
Electronics Forum | Tue Jul 05 16:58:00 EDT 2022 | jdengler
When these old Fuji's do weird things I usually try a reset start. Many times that fixes the issue. Make sure you have a valid proper file before you try it. Jerry
Electronics Forum | Fri Jul 01 17:52:45 EDT 2022 | madisreivik
Hello ! I got very strange problem with Fuji IP3 (year 2000 something) MTU picks up the part and puts it on carrier conveyor Conveyor moves the part into main machine. All the positions are correct, centers etc.. But now, the main machine pick th
Electronics Forum | Tue Jul 05 07:02:26 EDT 2022 | richardcargill
Possibly, yeah. Or the wrong sized nozzle ( or chipped or blocked ) We have problems occasionally with larger components and vacuum levels. If the component has a makers 'circular void' on the pick up surface then the actual pick coordinates have to
Electronics Forum | Tue Jul 05 07:16:35 EDT 2022 | madisreivik
The problem is that.. 1) it always drops at the same location and the vacuum led shows that machine indeed turns the vacuum off ! 2) the same nozzle picks up much heavier components from other feeders without problems 3) the MTU component - i turn
Electronics Forum | Fri Jul 12 12:30:56 EDT 2002 | soupatech
I just go off the phone w/ Fuji and they seem to think that the lizard tounge (used another name, same idea) is only available for the IP3. They had a few other suggestions for adapting the IP2 like a rubber pad for the carrier or building "rails" to
