34 ipc workmanship results

Electronics Forum: ipc workmanship (Page 1 of 4)

Inspect workmanship through conformal coating

Electronics Forum | Tue Sep 06 12:41:52 EDT 2016 | kmclain

IPC J-STD-001 does not allow solder inspection to be combined with coating inspection for classes 2 and 3.

Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?

Electronics Forum | Thu Feb 05 14:30:29 EST 2015 | chsravan

Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?

Electronics Forum | Fri Feb 06 18:32:59 EST 2015 | chsravan

Hi Scott,Thank you for the response. I was also thinking the same that the assembly will no longer be Class III. Thanks again.

Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?

Electronics Forum | Fri Feb 06 11:11:04 EST 2015 | mascott123

I have asked that same question to a co-chair of the J-STD-001 committee who in turn checked with personnel at IPC. The answer I received is that yes you can apply the Class 3 assembly requirements using a class 2 PWB but the resultant assembly will

PCB Surface Question - Picture attached

Electronics Forum | Wed Mar 24 00:03:20 EDT 2010 | boardhouse

Hi Itzik, it looks like you receive a board from your manufacture that they did solder mask rework on. it looks like they stripped tried to strip the mask off the board. Was this the only board that was like this or did the whole order look like th

Socket in wave soldering

Electronics Forum | Mon Mar 01 11:56:51 EST 2010 | pjc

Your IPC-610 workmanship manual will have the answer for you (I don't have the latest at my fingertips). Depends on what class you are building too, 1, 2 or 3 and the application of this connector on the product- which you must determine.

Manual soldering - solder wire diameter and soldering iron tip size for different component sizes

Electronics Forum | Tue Apr 16 05:05:32 EDT 2013 | stivais

We recently had a discussion with customer's QM - he claims that calculations for a proper solder wire diameter and soldering iron tip size (and temperature) have to be performed and documented for all manual (T/H) solderings (based on component size

What standards should electronic manufacturing meet?

Electronics Forum | Fri Mar 19 13:42:05 EST 2004 | blu_nozer

J-STD-001 is the workmanship standard. IPC-A-610 is a guide to evaluating conformance to the standard & includes photographs of compliant and non-compliant examples. In addition there is also IPC-HDBK-001 which expands on the bare requirements laid d

Mechanical Assembly Standards?

Electronics Forum | Tue Aug 24 07:26:10 EDT 2004 | davef

Try: * Telcordia Technologies [Belcor] GR-78-CORE * IPC-WHMA-A-620 a cabling workmanship standard that is a corollary to A-610

Solder Ball Criteria

Electronics Forum | Tue Mar 17 08:20:59 EDT 2009 | scottp

I work for one of the largest automotive suppliers. Our Workmanship Standards pre-date IPC-610 but they are nearly identical in regards to solder balls. We supply to all the major OEMs, including the Japanese, and I don't recall our solder ball sta